HT1420 need more than 5 computers to authorize?

We are in 2014... homes have a lot more than 5 computers now. Is there a plan or a way to authroize more computers for the iTunes store?

No there isn't a way, the current limit is 5 computers on which your account can be authorised at any one time. Whether that limit will be increased at some point we won't know until if/when Apple announce something (these are user to user forums). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/itunesapp.html

Similar Messages

HT1420 Need more than 5 authorisation ...

I have many apple devices but i can authorise only 5, how can I add one more? Thank you ...

No there isn't a way, the current limit is 5 computers on which your account can be authorised at any one time. Whether that limit will be increased at some point we won't know until if/when Apple announce something (these are user to user forums). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/itunesapp.html

PS CC Says I need more than 512 Vram ...

I was using Photoshop last night just to prep a couple of photos for class submission (3 pictures, just reducing their size for web consumption), and I got the message stating that I needed more than 512 Megs of Vram, which was odd to me, as I have 1024 Dedicated available on my video card. I don't run a dual monitor setup any longer, but I do have an ASUS PBs278 that's running at 2560 X 1440. My current graphics card is an ATI Radeon 6800 HD, and my windows 7 system is running on 8 gigs of ram. Up till within the last week, CC has worked just fine, but the other day on boot, it took an unusually long time to get into the software. It eventually did, and I'm wondering if that was an update or some such that's now made the software decree that if it doesn't have the 512 it thinks it should have, the 3d functions won't happen. I don't know if it's a consequence of the larger quantity of pixels being pushed, or if it's the video card getting too old to support CC at such a high resolution now, but some help would be amazing.

Windows 7, 64 bit. I haven't been able to replicate the error, but I have the new drivers as well. I hope this just ends up being a fluke.

How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.

Hi, I use licensed Adobe Connect. Earlier in the meeting could involve up to 100 people. Now only 25. How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.
Thanks for your help.

The purchasing option through adobe.com only allows up to 25 attendees. If you need more than that, you will need to purchase through a reseller. You can find one that is able to sell in your part of the world, here: Adobe Connect Partners. Just reach out to one of the Global Partners.

I need more than the maximum allowed 30 profiles - how do I change this?

I need more than the maximum allowed 30 profiles - how do I change this? Once I reach 30 profiles and I try to add one - it just deletes one automatically thus only allowing a maximum of 30. Please help.

You are talking about 30 Firefox Profiles on the same Windows Logon User Account?
I never saw that as a limit myself. I had 53 Profiles at one time, although I haven't done that since Firefox 3.0. It was causing an extended launch time and I started using "remote" Profiles that weren't controlled by the Profile Manager and weren't in the '''profiles.ini''' file; launched by command line. Like this in the Target line for the desktop shortcut: <br />
''' "C:\Program Files\Firefox_4.0_zip\firefox.exe" -Profile D:\Mozilla\Active-Profiles\4.0_10-15-10-N '''

NEED more than 15 menu item in Context Menu ????

Hi,
I really need to have more than 15 menu item displayed on Context Menu. I desperately need some workaround or ideas to achieve this
My client has invested thousands of dollar in Flex Project, he definitely need more than 15 menu item.If this project failed , client will NEVER think to invest in flex.
Had I been aware of this limitation before I would have thought some solution by now.This comes as a surprise to me at the last moment ,just fews days before Prod Date.
I cant also user java Scrip heck as my Flex application is running inside Dot net Container , I do not access to the luxury of java script
Pls gents help me get rid of this ...PLEASE provide some ideas.
Thanks in advance.
Thanks,
Dharmendra

Thanks Natasha,
I got your point but as for as I know grouping like Quality is not possibel in Flax Context menu. I also cant go for window style menu(file,edit) because I need them to be displyed on DataGrid right clk . I am designing a trade datagrid where in trader can see all trades and he can approve/reject etc by just right clk and selcting proper menu item form Context Menu.
In case of window style (acrobat.com) menu trader will have to reach to menu instead of getting all options on mouse right clk
I will have to think other alternative wich provides same ease as cotext menu.(God knows what is that )
Once again thanks for suggestion.
Regards,
Dharmendra

Need more than 90 minutes of continual video

,Need more than 90 minutes of continual video? Hi all,
I'm using the Vado HD [first gen] as a "hidden cam" type of thing for a play that I am filming. I have 2 normal cameras set out in the audience, but I want to mount the Vado HD above the stage for a bird's eye view of a sword fight scene that I can cut to when editing footage. The problem is that the fight scene happens near the end of the play and there are no intermissions.
Since the filesystem used on the Vado HD is FAT and not NTFS or HFS+, I run into the 4GB limit and the camera simply puts itself to sleep about 45 minutes into recording even though there is more space on the dri've and the battery is fine.
Can I reformat the Vado HD with HFS+ or NTFS? [i use a Mac but can run windows via VMware Fusion if need be]. Is there any way to squeeze 90 minutes of video in one file on this camera? If I reformat the camera, will it mess it up? [i don't use any of the apps that were installed on the camera - i moved them from the vid camera to my laptop actually, so i don't care about losing anything valuable on the vid camera].
Thanks for any tips you might have!
/vjl/

Could the reason be that you are capturing to an FAT32 format hard drive and it is only allowing you a limited maximum file size? Not sure but I think it is 4GB which would equate to 1/3 of a DV 13GB hour ...or about 20 minutes.
If that is correct, and you should be able to tell because the capture window will display the file size limit as space available during capture, you could do one of two things:
* reformat the drive as NTFS which removes the file size limitation (I have just done this on an external drive for exactly the same reason), but do look up online instructions for this and do it carefully.
* if the material is not long continuous shots of over 20 minutes, switch on Scene Detect during capture; it's wise to cut material up into smaller chunks in any case as huge files become very unwieldy and handling them could slow your machine right down.

Why do we need more than one retained earnings accounts & what is the use?

Hi FI Experts,
Why do we need more than one retained earnings accounts, what is the precise use of two?
I know the retained earnings account is used to carry forward the balances during the year end to the balance sheet and there by making the p&L A/cs balances as zero.
I guess the second one is used for different valueations for example as depreciation accounts for different valuations will have different retained earnings accounts.
Kindly correct me if I am wrong and eloborate on the use having more than one retained earnings accounts.
with regards
Ramesh Y

Hi,
Well, separate retained earnings accounts are used for parallel financial reporting, it means when you need to report in accordance with, for example, local GAAP and IFRS or US GAAP at the same time. Several retained earnings accounts are necessary when the company chooses account based approach for parallel reporting. (GL accounts are broken down into several groups, for example you use different accounts for IFRS valuation, for local GAAP and they are also shared accounts common for both principles.)
m.

Business graphics need more than one category

Dear All,
     We have a issue for business graphics need more than one category about web dynpro abap.
   Our data:
   plant   month   qty
1000   201101 10
1000   201102 30
2000   201101 30
2000 201103   40
Now we need one category for "plant" and other category for "month", Data is qty.

Hello Bill,
could you explain bit more about your requirement? How would you like the graph to be renderded with two categories. Can't you club Plant and Month into one single category (1000-201101) and display it?
BR, Saravanan

Firefox is the only browser that need more than 700 ms accesstime, when others need only 10! Why is that???

I have tested Google Chrome, Firefox and Internet Explorer. Firefox is using between 500-1100 ms accesstime, using Bredbandskollen.se, while the other two only uses around 10 ms!

First of all, thank you for your response.
Below you can find the answers to your questions:
1) YES, I am using version 4, build 0024.00. Forgot to mention that I use Windows 7 64-bit and Firefox 11 (I don't use Chrome or IE)
2) I cannot confirm that, because the problem doesn't appear every time. For example, today EVERYTHING works OK! I haven't change anything or done something different, but since I boot my T410s, every site log in with ONLY one swipe (today even Yahoo for the first time). As I said, SOMETIMES PWM asks for one swipe, other for 2 and rarely for 3 swipes. But I think that when the problem appears, PWM need more than one fingerprint swipe every time I go to the website.
3) The setting for "before logging me into a Web site or application..." is "Every time". As I said, I need this setting to be "Every time", as my notebook sometimes is being used by other persons.
It is really a stange problem and when it appears it is very annoying. Have you any other ideas about what it's going on?

Need more than 5 rows in bridge-output-webgallery-HTML gallery

Hello,
I need more than 5 rows in bridge-output-webgallery-HTML gallery for my website. 10-20 rows would be perfect in my opinion.
all help will be highly appreciated
Rune Hammerstad
http://exterill.com

You could request a change here...
http://feedback.photoshop.com/photoshop_family/topics
If enough people support your request it might get changed, worth a try.

HT1420 Authorizing More than Five Computers

Why can't use authorize more than five computers? It is driving me crazy!

Because that is the limit that Apple have decided on, if you want to know why then you'll need to try asking them (and iPads, iPhones and iPods aren't included in the 5 computer limit).

HT1420 authorise more than 5 computers

am i able to autherize more than 5 computers to my itunes id, i have 4 imacs, a macbook pro and 2 air's in my family......

Welcome to the Apple Community.
No, 5 is your limit.

Need more than 10 ports forwarded...any way??

Is there a way to increase the number of port forwards allowed in theWRT54G?
We have 15 computers that need access to port 4899 in the RAdmin remote access. Is there something I can do to gain more than 10 ip addresses access to this port .... like a ip range?
Thanks in advance.
Dennis

No. Forwarding can be used only for 1 PC, in situation where you need to forward any particular traffic to particular terminal, such any servers. If you need to allow multiple Pc to access any particular traffic then you may trigger the port instead.

Need more than 4 port router

Hello,
I need to connect more than 4 computers/game systems to the router, how do I go about doing this? Do I need a router with more ports or is there another way? Thanks
Solved!
Go to Solution.

chet wrote:
Could you guide me as to how to add this switch?
One of the ways of doing that, is having a second router and following...
portforward.com -> forum -› Knowledge Base -› Using a Second router as a Switch/Hub/WAP
http://forum.portforward.com/YaBB.cgi?num=1133918703
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

HT1420 need more than 5 computers to authorize?

Similar Messages

Maybe you are looking for