HT1420 The authorize option does not exist on my computer.

The one time I clicked it, it deauthorized everything and now the button doesn't even exist. That Alt+S thing doesn't work either. It seriously just does not exist. What?????

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

Similar Messages

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud.

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud due to older running system on my macbook pro.

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

SocialListNotFound : The Social list does not exist in your personal site.

In SharePoint 2013; when a person try to follow a document which is located the SkyDrive Pro of another person it pop up erros message shows as below.
Something went wrong
Sorry, we couldn't follow the document.
TECHNICAL DETAILS
SocialListNotFound : The Social list does not exist in your personal site.
Can anyone help on this...

Hello all,
I have the exact same issue.
When a user tries to follow some document or site, the same error occurs. When I look at the personal site of the user, the "Social" list is missing.
When I have another user do the same thing, it works! The Social list for that user is there.
The difference between the 2 users:
The user where the issue occurs => mysite has been upgraded from SharePoint 2010
The user where the issue doesn't occur => mysite has been created after the upgrade to SharePoint 2013.
So, I tried to delete the mysite of the user who had the issue and let him recreate it by visiting the MySite host and now it works!
The thing is... I have 100 users having the same issue and a lot of them are actually using their mysite, so deleting those mysites is not really an option.
I have 2 questions:
1. why is that "Social" list not created when mysites are upgraded from SharePoint 2010?
2. Can I trigger some process which fixes this for existing sites?
Thanks,
Bart

An Error has occured:The plugin 65534 does not exist in the CMS (FWM 02017)

Hi,
I get the error when I click on Parameter option while rescheduling Crystal Reports from Infoview. I can schedule the reports successfully, the error is only while rescheduling.
The error is as follows:
An error has occurred: The plugin -65534 does not exist in the CMS (FWM02017)
Environment - BOXI 3.1 with Windows AD
Application server - Tomcat
Would appreciate any help.
Regards,
Anisa

Hello Anisa,
Are you able to solve the issue...
We are also getting same issue. if you are able to resolve the issue. please let us know the setps you followed it will be of great help.
Thank You,
Regards,
Satheesh Reddy. R.

Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
Sounds like you are a bit confused with version numbers.
Latest AirPort Utility version for the iPhone / iPad is 1.3.3. There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

After log off " The requested resource does not exist. " is coming

hi,
When I logoff from the portal (EP6.0 SP 13)i got yes or no options to logoff from the portal. When I click on the yes option I am getting
404: Not found
The requested resource does not exist.
Details: Go to main page of this application!
Where i should get the logon page screen. Can any onehelp me.

Hi,
In configtool, there are to different place that you can change this parameter.
If you change from
cluster_data -> Instance_IDXXXXX
It doesn't change the global configuration. You should change from
cluster_data -> Global server configuration
Where did you changed your parameter ?
Regards
Abdul.

Azure Rest API PUT Block Blob Returns "The specified resource does not exist" CORS

I am trying to upload a file to Azure Blob storage. For some reason when I try to put a new block blob on in the storage it tells me the resource does not exist. I am sure it is something silly I am missing.
According to the documentation:
The Put Blob operation creates a new block blob or page blob, or updates the content of an existing block blob. Updating an existing block blob overwrites any existing metadata on the blob. Partial updates are not supported with Put Blob; the content of the
existing blob is overwritten with the content of the new blob. To perform a partial update of the content of a block blob, use the Put Block List (REST API) operation.
CORS is setup and that seems okay.
When I do a preflight and get this:
Request URL:https://<account>.blob.core.windows.net/test/image.png
Request Method:OPTIONS
Status Code:200 OK
Request Headers
OPTIONS /test/image.png HTTP/1.1
Host: <account>.blob.core.windows.net
Connection: keep-alive
Cache-Control: no-cache
Pragma: no-cache
Access-Control-Request-Method: PUT
Origin: http://www.<site>.com
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36
Access-Control-Request-Headers: accept, content-type
Accept: */*
Referer: http://www.<site>.com/azure/
Accept-Encoding: gzip,deflate,sdch
Accept-Language: en-US,en;q=0.8
Response Headers
HTTP/1.1 200 OK
Transfer-Encoding: chunked
Server: Blob Service Version 1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: 0d372e95-1524-460a-ab9c-7973d42a7070
Access-Control-Allow-Origin: http://www.<site>.com
Access-Control-Allow-Methods: PUT
Access-Control-Allow-Headers: accept, content-type
Access-Control-Max-Age: 36000
Access-Control-Allow-Credentials: true
Date: Thu, 27 Feb 2014 22:43:52 GMT
But when I make the PUT request these are the results.
Request URL:https://<account>.blob.core.windows.net/test/image.png
Request Method:PUT
Status Code:404 The specified resource does not exist.
Request Headers
PUT /test/image.png HTTP/1.1
Host: <account>.blob.core.windows.net
Connection: keep-alive
Content-Length: 22787
Cache-Control: no-cache
Pragma: no-cache
x-ms-blob-content-dis; filename = "image.png"
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.117 Safari/537.36
Content-Type: image/png
x-ms-blob-type: BlockBlob
Accept: application/json, text/plain, */*
x-ms-version: 2013-08-15
Origin: http://www.<site>.com
x-ms-date: Thu, 27 Feb 2014 23:19:19 GMT
Referer: http://www.<site>.com/azure/
Accept-Encoding: gzip,deflate,sdch
Accept-Language: en-US,en;q=0.8
Response Headers
HTTP/1.1 404 The specified resource does not exist.
Content-Length: 223
Content-Type: application/xml
Server: Blob Service Version 1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: d5a60c8b-356a-44ff-93af-0ea720b5591f
x-ms-version: 2013-08-15
Access-Control-Expose-Headers: x-ms-request-id,Server
Access-Control-Allow-Origin: http://www.<site>.com
Access-Control-Allow-Credentials: true
Date: Thu, 27 Feb 2014 23:22:42 GMT

Your request must be authenticated to be able to upload a blob. Please see our
Windows Azure Storage: Introducing CORS blog post for more information on using Shared Access Signatures with CORS.

SAP Portal Integration - The plugin secSAPR3 does not exist (FWM 02016)

Hi Gurus,
I have some problems with the integration of SAP Portal.
I have created an iview in the SAP Portal with a Webi Report.
When executed, displays the login page of InfoView without any authentication option, only request user an password. When I insert my credentials, appears the following error:
Account Information Not Recognized: The plugin secSAPR3 does not exist (FWM 02016) and I cannot login.
Previous to this error message, appears an alert from the Session Management, advising me that the application will launch in other domain. I donu2019t know what problems can lead this fact.
I have configurated the SAP Authentication in CMC and imported roles and users from BW. I can use the same user and password in both environments and works fine.
Can anyone help me?
Thanks in advance!
Isaac.

Hi IRoyan,
First let's explain why the plugin secSAPR3 doesn't exist:
1> when you view report from SAP EP to the report in BOE, it would use OpenDocument view application to logon and open the report.
2> and the secSAPR3 plugin is the file of secSAPR3.jar;
3> So it means the secSAPR3.jar is not in the classpath of OpenDocument application.
How to resolve it:
1> In the existing BOBJ solution, the secSAPR3.jar is included in PartnerPlatformServices;
2> So please try to modify the web.xml under the directory $INSTALLDIR$:\Business Objects\Tomcat55\webapps\OpenDocument\WEB-INF, add the logon service URLcontext:
    <context-param>
        <param-name>config.logon.service.context</param-name>
        <param-value>/PartnerPlatformService</param-value>
    </context-param>
    <context-param>
        <param-name>config.logon.service.url</param-name>
        <param-value>/service/app/logon.do</param-value>
    </context-param>
Hope you can understand it and it helps.
Thanks,
Rongliang

The name "Folder" does not exist in the namespace

I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
I am using Visual studio 2013. As I work through the example I am getting the following error.
Error 1
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
11 17
FolderExplorer
Error 2
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
16 7
FolderExplorer
Here is the code:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:my="clr-namespace:FolderExplorer"
Title="Folder Explorer" Height="350" Width="525">
<Window.Resources>
<ObjectDataProvider x:Key="RootFolderDataProvider" >
<ObjectDataProvider.ObjectInstance>
<my:Folder FullPath="C:\"/>
</ObjectDataProvider.ObjectInstance>
</ObjectDataProvider>
<HierarchicalDataTemplate
DataType = "{x:Type my:Folder}"
ItemsSource = "{Binding Path=SubFolders}">
<TextBlock Text="{Binding Path=Name}" />
</HierarchicalDataTemplate>
</Window.Resources>
I have a class file named Folder.vb with this code.
Public Class Folder
Private _folder As DirectoryInfo
Private _subFolders As ObservableCollection(Of Folder)
Private _files As ObservableCollection(Of FileInfo)
Public Sub New()
Me.FullPath = "c:\"
End Sub 'New
Public ReadOnly Property Name() As String
Get
Return Me._folder.Name
End Get
End Property
Public Property FullPath() As String
Get
Return Me._folder.FullName
End Get
Set(value As String)
If Directory.Exists(value) Then
Me._folder = New DirectoryInfo(value)
Else
Throw New ArgumentException("must exist", "fullPath")
End If
End Set
End Property
ReadOnly Property Files() As ObservableCollection(Of FileInfo)
Get
If Me._files Is Nothing Then
Me._files = New ObservableCollection(Of FileInfo)
Dim fi As FileInfo() = Me._folder.GetFiles()
Dim i As Integer
For i = 0 To fi.Length - 1
Me._files.Add(fi(i))
Next i
End If
Return Me._files
End Get
End Property
ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
Get
If Me._subFolders Is Nothing Then
Try
Me._subFolders = New ObservableCollection(Of Folder)
Dim di As DirectoryInfo() = Me._folder.GetDirectories()
Dim i As Integer
For i = 0 To di.Length - 1
Dim newFolder As New Folder()
newFolder.FullPath = di(i).FullName
Me._subFolders.Add(newFolder)
Next i
Catch ex As Exception
System.Diagnostics.Trace.WriteLine(ex.Message)
End Try
End If
Return Me._subFolders
End Get
End Property
End Class
Can someone explain what is happening.
Thanks Hal

Did you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
xmlns:my="clr-namespace:FolderExplorer"
The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

Bursting Problem - A file or directory in the path name does not exist

I'm trying to burst some data via email using the standard DocumentProcessor java code but receiving an error relating, I assume, to an invalid temporary directory. I've checked that the directory exists, as do the data file and control file. By the way I am not running in Apps, just stand alone mode. Any ideas would be much appreciated.
[042308_104249440][oracle.apps.xdo.batch.bursting.FileHandler][EXCEPTION] java.io.FileNotFoundException: /u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp (A file or directory in the path name does not exist.)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
at oracle.apps.xdo.template.RTFProcessor.setOutput(Unknown Source)
at oracle.apps.xdo.batch.bursting.FileHandler.rtf2xsl(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.getXSLFile(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.batch.DocumentProcessor.process(Unknown Source)
at PIreportburst.bEngine(PIreportburst.java:24)
at PIreportburst.main(PIreportburst.java:51)
-Below is the java code I'm using
public void bEngine(String ctrlFile, String dataFile, String tmpDir) {
try {
DocumentProcessor dp = new DocumentProcessor(ctrlFile,dataFile,tmpDir);
dp.process();
catch (Exception e) {
System.out.println(e);
}

Thanks Ike
Where do you suggest setting the temp directory:
DocumentProcessor("control.xml","data.xml","/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp")
or in the xdo.cfg:
<property name="system-temp-dir">/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp</property>
..and thanks for the link to the BIPublisherIDE
Cheers, Mike

JDODataStoreException: The instance null does not exist in the data store

I'm unable to figure out how this exception occurs.
I have a class IDCounter which has a number of fields such as
'm_Name' (String)
'm_AccountName' (String)
'm_UserName' (String)
'm_Description' (String)
'm_CreationDate' (Date)
'm_LastModifiedDate' (Date)
'm_DeletedDate' (Date)
'm_Count' (long)
The filter I'm using is "m_AccountName == \"test\" && m_UserName
==\"test\" && m_DeletedDate == null"
The generated SQL statement is "SELECT t0.M_IDX, t0.JDOCLASSX,
t0.JDOLOCKX, t0.M_ACCOUNTNAMEX, t0.M_CREATIONDATEX, t0.M_DELETEDDATEX,
t0.M_DESCRIPTIONX, t0.M_LASTMODIFIEDDATEX, t0.M_NAMEX, t0.M_USERNAMEX,
t0.M_COUNTX FROM ABSTRACTENTITYX t0 WHERE ((t0.M_DELETEDDATEX IS NULL) AND
t0.JDOCLASSX = 'com.ewarna.pdm.entities.IDCounter')"
Exception Trace:
javax.jdo.JDODataStoreException: The instance null does not exist in the
data store.
     at
com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.instantiateRow(LazyResultList.java:165)
     at
com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.get(LazyResultList.java:96)
     at java.util.AbstractList$Itr.next(AbstractList.java:416)
     at
com.solarmetric.kodo.runtime.ResultListIterator.next(ResultListIterator.java:49)
     at
com.solarmetric.kodo.impl.jdbc.runtime.ResultListFactory.createResultList(ResultListFactory.java:85)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:646)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:150)
     at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:580)
     at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:428)
     at
com.solarmetric.kodo.query.QueryImpl$SynchronizedQuery.execute(QueryImpl.java:1331)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByAdvancedFormula(BasicQuery.java:78)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:119)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:95)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getAll(BasicQuery.java:131)
     at
com.ewarna.pdm.sessions.persistence.GenericEntityManager$7.execute(GenericEntityManager.java:305)
     at
com.ewarna.pdm.sessions.persistence.GenericEntityManager.execute(GenericEntityManager.java:251)
     ... 18 more

Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
Cause and prerequisites
In very rare cases, when you store a workbook, you might not be able to open it again.
Solution
Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

/etc/oratab (a file or directory in the path name does not exists)

Hello All,
I ma trying to create a database oracle 11g R2 on AIX 6.1.
But i am facing the below error at the beginning of the installation:
/etc/oratab (a file or directory in the path name does not exists)
Your help pls..

When I am trying to run root.sh. it gives the below error:
IST76SIT:/apps/oracle/oracle11/app/product/11.2.0/db1> ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle11
ORACLE_HOME= /apps/oracle/oracle11/app/product/11.2.0/db1
Enter the full pathname of the local bin directory: [usr/local/bin]: /usr/local/bin
Creating /usr/local/bin directory...
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Finished product-specific root actions.
./root.sh[14]: /apps/oracle/oracle11/app/product/11.2.0/db1/rdbms/install/rootadd_rdbms.sh: not found.
./root.sh[16]: /apps/oracle/oracle11/app/product/11.2.0/db1/rdbms/install/rootadd_filemap.sh: not found.
IST76SIT:/apps/oracle/oracle11/app/product/11.2.0/db1>

Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.

Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

The view 'cpdpopupeditactionsview' does not exist.

I just installed UCM without any issues as far as I could see, but when I log in as sysadmin at http://localhost/idc/ I always get a popup box saying:
"The view 'cpdpopupeditactionsview' does not exist."
Looking for the cpdpopupeditactionsview string in the UCM installation directory gives me this:
grep -i cpdpopupeditactionsview -R $UCM
$UCM/server/custom/ContentFolios/templates/idc_folio_display.js:          "CpdPopupEditActionsView", idc.folio.display._popupEditActions);
$UCM/server/custom/ContentFolios/templates/idc_folio_display.js:     idc.folio.util.loadFolioView("CpdPopupEditActionsView", null, null, callback);
$UCM/server/weblayout/help/admin/folios_admin/wwhdata/js/search/search0.js:if(x.t("cpdpopupeditactionsview"))y.f("7,1");
$UCM/server/weblayout/help/admin/folios_admin/wwhdata/java/search.xml:<i t="cpdpopupeditactionsview" l="7#1"/>
$UCM/server/weblayout/help/admin/folios_admin/page_1_08.htm:<a name="wp1090240"> </a><div class="pSmartList1"><li>CpdPopupEditActionsView</li></div>
$UCM/server/weblayout/resources/folios/util.js:          "CpdPopupEditActionsView", idc.folio.display._popupEditActions);
$UCM/server/weblayout/resources/folios/util.js:     idc.folio.util.loadFolioView("CpdPopupEditActionsView", null, null, callback);Anyone know why this is happening?
Thanks

Hi
This issue is resolved by manually uninstalling the ContentFolios component via editing the database directly. This only works if the client does not have any ContentFolio data - created or migrated; if they do have existing Content Folio data this will cause great harm to the integrity of their collection.
1. Uninstall the ContentFolios component.
2. Delete the following tables from the database;
CpdArchivedLinks, CpdBasketLinks, CpdChangeHistory, CpdLinks
3. Delete the entry for ContentFolios from the Config table.
4. Restart the Content Server.
5. Install the ContentFolios component.
Hope this helps
Thanks
Srinath

HT1420 The authorize option does not exist on my computer.

Similar Messages

Maybe you are looking for