HT1423 how to increase internal hd capacity on iMac

how to increase internal hd capacity on iMac

You would probably need to take your iMac in to an Authorized Apple Service Center and pay them to replace your harddrive with a unit with more storage capacity. You could try to do it yourself, but it is very labor intensive.
Hope this helps

Similar Messages

How to replace internal Hard Drive on iMac G5 iSight 1.9GHz

Hello everyone,
The internal hard drive of my iMac has died (apparently), and is no longer detectable by Disk Utility. It occasionally makes a "click/tick" sound so I know it's still spinning inside. I currently am booted up from an external firewire drive with Tiger (10.4.11) installed.
I have been attempting to locate a service manual that shows how to open the case to my 17" iMac G5 iSight 1.9GHz model. I have found a service manual from the previous generation iMac G5 NON-iSight models, but the bottom access panel and screw locations differ from my iMac.
I have purchased an internal 500GB Seagate 7200.12 replacement drive.
Does anyone know where I can find a manual with pictures showing how to disassemble this particular iMac so I can install the new hard drive?

Ticking is a death rattle for drives and below are some helpful sites with pix.
http://www.kodawarisan.com/imacintel/imacintel01.html
http://xlr8yourmac.com/systems/imacisight_internals/imac_g5_isightinside.html
http://nl.youtube.com/watch?v=iVgL9u7ySUk
http://nl.youtube.com/watch?v=fI_QmBueWg4&feature=related
The reason Apple don't publish pix of the insides of the iSight is that they say that there are no user serviceable parts.

How to increase performance for early '06 iMac

I am an iMac newbie (so please pardon my ignorance) having just purchased a second-hand iMac. I am very keen on increasing the current performance substantially due to the fact that I will be in the near-term using some rather advanced software.
In other words, are there any steps I can undertake from a hardware perspective (e.g. increase the amount/speed of RAM, etc.)to increase the speed and performance of my recently purchased computer? Please let me know if any additional detail is needed. Thank you so much and I am excited to join the iMac community.
The iMac in question possesses the following characteristics:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0055.B08
SMC Version: 1.1f5
RAM
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0xCE00000000000000
Part Number: 0x4D342037305432393533435A332D43453620
Serial Number: 0xF3198995
BANK 1/DIMM1:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0xCE00000000000000
Part Number: 0x4D342037305432393533435A332D43453620
Serial Number: 0xF3198999
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
ST3160023AS:
Capacity: 149.05 GB
Model: ST3160023AS
Revision: 3.42
Serial Number: 5MT3HF52
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 117 GB
Available: 87.51 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /

Hi Todd
You and Barbara are correct, the Early Core Duo's only support 2GB of RAM.
http://support.apple.com/kb/SP35
Like lenn5 say's below a Hard Drive swap might help a little, the [Seagate Barracuda 7200.7 160.0 GB|http://www.seagate.com/ww/v/index.jsp?vgnextoid=3f9b3b0c2aeef010VgnVCM100000 f5ee0a0aRCRD&vgnextchannel=f424072516d8c010VgnVCM100000dd04090aRCRD&locale=en-US &reqPage=Legacy] in my 3 year old Core Duo only has a SUSTAINED TRANSFER RATE up to 58 (MB/sec).
Dennis

How can I increase the storage capacity in Linux for installing Oracle 11g?

Hi all,
I've been searching in Internet information about how to increase the storage capacity of a Linux machine, so that it can help me with my problem without success. I tried to execute some command lines encountered in some tips in forums, but no one works.
I want to install an Oracle 11g database, which needs 4 GB minimal for the installation. I can not continue with the installation because of this problem.
I use a VMWare virtual machine, which I increased over its settings to 160 GB, but not its file systems or whatever in the machine.
I did this:
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 18G 15G 1.9G 89% /
/dev/sda1 190M 12M 169M 7% /boot
none 506M 0 506M 0% /dev/shm
/dev/hdc 699M 0 699M 100% /media/cdrom
As far I understand the bigger storage capacity is used by the file system /dev/sda3. But what about the rest, I mean the 140 GB?. I've already increased the storage capacity over the settings. How can I tell the machine "please use the remaining 140 GB for the installation of the Oracle DB and other needed installations?.
How can I increase here what?. Disk? File system? Volume Group? It can not be so difficult, can it?
There are no volume groups in the machine:
+[root@localhost /]# vgdisplay+
+No volume groups found+
Linux is too complicated. Unfortunately I have to do that in Linux :-(
Can someone help me? I sit here since long hours without finding a solution :-(

thanks for your answers.
To Dude:
You can address the problem in a number of different ways, but please post your version of Linux and provide more information about your current partitions
The Version of Linux is Linux Red Hat Enterprise 5.
Open Logical Volume Management from the System Administration menu.
Select your volume from the logical view, edit properties and then use the slider to set your volume size, or click "remaining" to extend your partition.
I've already opened the LVM from the System Administration menu, but there is no possibility to see the volume groups, because there is no one. There is no tabs like Volume Groups or something like that...
I would try the procedure described above your answer and write you again. I hope it works...I will write you back in a few minutes...

How can increase total hard drive capacity?????

I just got an apple 750gb Sata internal hard drive. I wanted to add the 750 gb to the original hard drive because i'm running out of space. By mistake I used that 750gb as the time machine hard drive. How can I erased the time machine and used the brand new 750 Gb sata as an add on to increase the total capacity of my computer.
Thanks
Divi

You can't "add" one drive to another. You have to create your RAID which deletes current data. Then copy/restore files.
And anytime you want to create a RAID, use the same make and model drives.
Usually using one drive for OS/Apps and 2nd drive for scratch, 3rd for data is a good start. Then put your RAID in an external setup for such purposes or for a larger multi-drive scratch array.
You can hood up 6 drives before you have to get into a $200 RAID controller.
RAID is one of the most common topic of threads.

How to increase the length of internal table dynamically

How to increase the length of internal table dynamically depending on the number of fields fetched into the internal table ?
The requirement code :
types: begin of t_data,
         form          like zscr_data_hdr-form,
         werks         like zscr_data_hdr-werks,
         matnr         like zscr_data_hdr-matnr,
         verid         like zscr_data_hdr-verid,
         lot           like zscr_data_hdr-lot,
         lot_qty       like zscr_data_hdr-lot_qty,
         udate         like zscr_data_hdr-udate,
         utime         like zscr_data_hdr-utime,
         zuser         like zscr_data_hdr-zuser,
         processed     like zscr_data_hdr-processed,
         defect        like zscr_defect_data-defect,
         vornr         like zscr_route_data-vornr,
         fld1          like zscr_defect_data-defect_val,
         fld2          like zscr_defect_data-defect_val,
         fld3          like zscr_defect_data-defect_val,
         fld4          like zscr_defect_data-defect_val,
         fld5          like zscr_defect_data-defect_val,
         fld6          like zscr_defect_data-defect_val,
         fld7          like zscr_defect_data-defect_val,
         fld8          like zscr_defect_data-defect_val,
         fld9          like zscr_defect_data-defect_val,
         fld10         like zscr_defect_data-defect_val,
         fld11         like zscr_defect_data-defect_val,
         fld12         like zscr_defect_data-defect_val,
         fld13         like zscr_defect_data-defect_val,
         fld14         like zscr_defect_data-defect_val,
         fld15         like zscr_defect_data-defect_val,
         fld16         like zscr_defect_data-defect_val,
         fld17         like zscr_defect_data-defect_val,
         fld18         like zscr_defect_data-defect_val,
         fld19         like zscr_defect_data-defect_val,
         fld20         like zscr_defect_data-defect_val,
         fld21         like zscr_defect_data-defect_val,
         fld22         like zscr_defect_data-defect_val,
         fld23         like zscr_defect_data-defect_val,
         fld24         like zscr_defect_data-defect_val,
         fld25         like zscr_defect_data-defect_val,
         fld26         like zscr_defect_data-defect_val,
         fld27         like zscr_defect_data-defect_val,
         fld28         like zscr_defect_data-defect_val,
         fld29         like zscr_defect_data-defect_val,
         fld30         like zscr_defect_data-defect_val,
         fld31         like zscr_defect_data-defect_val,
         fld32         like zscr_defect_data-defect_val,
         fld33         like zscr_defect_data-defect_val,
         fld34         like zscr_defect_data-defect_val,
         fld35         like zscr_defect_data-defect_val,
         fld36         like zscr_defect_data-defect_val,
         fld37         like zscr_defect_data-defect_val,
         fld38         like zscr_defect_data-defect_val,
         fld39         like zscr_defect_data-defect_val,
         fld40         like zscr_defect_data-defect_val,
         fld41         like zscr_defect_data-defect_val,
         fld42         like zscr_defect_data-defect_val,
         fld43         like zscr_defect_data-defect_val,
         fld44         like zscr_defect_data-defect_val,
         fld45         like zscr_defect_data-defect_val,
         fld46         like zscr_defect_data-defect_val,
         fld47         like zscr_defect_data-defect_val,
         fld48         like zscr_defect_data-defect_val,
         fld49         like zscr_defect_data-defect_val,
         fld50         like zscr_defect_data-defect_val,
         fld51         like zscr_defect_data-defect_val,
         fld52         like zscr_defect_data-defect_val,
         fld53         like zscr_defect_data-defect_val,
         fld54         like zscr_defect_data-defect_val,
         fld55         like zscr_defect_data-defect_val,
         fld56         like zscr_defect_data-defect_val,
         fld57         like zscr_defect_data-defect_val,
         fld58         like zscr_defect_data-defect_val,
         fld59         like zscr_defect_data-defect_val,
         fld60         like zscr_defect_data-defect_val,
         fld61         like zscr_defect_data-defect_val,
         fld62         like zscr_defect_data-defect_val,
         fld63         like zscr_defect_data-defect_val,
         fld64         like zscr_defect_data-defect_val,
         fld65         like zscr_defect_data-defect_val,
         fld66         like zscr_defect_data-defect_val,
         fld67         like zscr_defect_data-defect_val,
         fld68         like zscr_defect_data-defect_val,
         fld69         like zscr_defect_data-defect_val,
         fld70         like zscr_defect_data-defect_val,
         fld71         like zscr_defect_data-defect_val,
         fld72         like zscr_defect_data-defect_val,
         fld73         like zscr_defect_data-defect_val,
         fld74         like zscr_defect_data-defect_val,
         fld75         like zscr_defect_data-defect_val,
         fld76         like zscr_defect_data-defect_val,
         fld77         like zscr_defect_data-defect_val,
         fld78         like zscr_defect_data-defect_val,
         fld79         like zscr_defect_data-defect_val,
         fld80         like zscr_defect_data-defect_val,
         fld81         like zscr_defect_data-defect_val,
         fld82         like zscr_defect_data-defect_val,
         fld83         like zscr_defect_data-defect_val,
         fld84         like zscr_defect_data-defect_val,
         fld85         like zscr_defect_data-defect_val,
         fld86         like zscr_defect_data-defect_val,
         fld87         like zscr_defect_data-defect_val,
         fld88         like zscr_defect_data-defect_val,
         fld89         like zscr_defect_data-defect_val,
         fld90         like zscr_defect_data-defect_val,
         fld91         like zscr_defect_data-defect_val,
         fld92         like zscr_defect_data-defect_val,
         fld93         like zscr_defect_data-defect_val,
         fld94         like zscr_defect_data-defect_val,
         fld95         like zscr_defect_data-defect_val,
         fld96         like zscr_defect_data-defect_val,
         fld97         like zscr_defect_data-defect_val,
         fld98         like zscr_defect_data-defect_val,
         fld99         like zscr_defect_data-defect_val,
         fld100         like zscr_defect_data-defect_val,
         fld101         like zscr_defect_data-defect_val,
         fld102         like zscr_defect_data-defect_val,
         fld103         like zscr_defect_data-defect_val,
         fld104         like zscr_defect_data-defect_val,
         fld105         like zscr_defect_data-defect_val,
         fld106         like zscr_defect_data-defect_val,
         fld107         like zscr_defect_data-defect_val,
         fld108         like zscr_defect_data-defect_val,
         fld109         like zscr_defect_data-defect_val,
         fld110         like zscr_defect_data-defect_val,
         fld111         like zscr_defect_data-defect_val,
         fld112         like zscr_defect_data-defect_val,
         fld113         like zscr_defect_data-defect_val,
         fld114         like zscr_defect_data-defect_val,
         fld115         like zscr_defect_data-defect_val,
         fld116         like zscr_defect_data-defect_val,
         fld117         like zscr_defect_data-defect_val,
         fld118         like zscr_defect_data-defect_val,
         fld119         like zscr_defect_data-defect_val,
         fld120         like zscr_defect_data-defect_val,
         fld121         like zscr_defect_data-defect_val,
         fld122         like zscr_defect_data-defect_val,
         fld123         like zscr_defect_data-defect_val,
         fld124         like zscr_defect_data-defect_val,
         fld125         like zscr_defect_data-defect_val,
         fld126         like zscr_defect_data-defect_val,
         fld127         like zscr_defect_data-defect_val,
         fld128         like zscr_defect_data-defect_val,
         fld129         like zscr_defect_data-defect_val,
         fld130         like zscr_defect_data-defect_val,
         fld131         like zscr_defect_data-defect_val,
         fld132         like zscr_defect_data-defect_val,
         fld133         like zscr_defect_data-defect_val,
         fld134         like zscr_defect_data-defect_val,
         fld135         like zscr_defect_data-defect_val,
         dayst         like zscr_data_hdr-dayst,
       end of t_data.
In this fld1 to fld135 are defined in internal table.
But if the number of fields are more than 135 then the program is going to short dump.
Some times fld1 to fid170 or more fields will be there in my internal table.
Please suggest me how to make my requirement dynamic and display this data fetched into this internal table onto a .XLS file in the presentation server ?

Hi
You can try to use the type string:
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fieldxx type string,
dayst like zscr_data_hdr-dayst,
end of t_data.
So you can save you informations of every fld<n> concatenating their values into fieldxx.
Max

How to increase the capacity of messages in the "Messages" apps

How to increase the capacity of the messages display in the "Messages" apps? How to display more messages in the "Messages" apps?
When iphone delete messages in the "Messages" app?

You can't change the Messages app capacity or the number of messages it displays. All Messages options can be found under Settings > Messages.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

How to increase field size in Internal table

Hi friends,
I want to concatenate around 20 fields in one internal table field,
i declared the destination filed as character, now i am able to get around 12 to 13 fileds only , how to increase the length of this field to include all fields ?
or how can i do this ? can any body help me ?
I concatenate this to create a file which will be send as email attachment.
its very urgent issue, kindly help me to resolve as early as possible.
Thanks in advance.
Joseph

Hi,
Use the string data type..
Example
DATA: IT_STRING TYPE STRING OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF WA,
             MATNR(18),
             WERKS(4),
             VBELN(10),
           END OF WA.
CONCATENATE WA-MATNR WA-WERKS WA-VBELN INTO IT_STRING.
APPEND IT_STRING.
Thanks,
Naren

HT1338 how to increase mac air storage capacity

every time i turn on my Mac Air, a window pop up saying "your Computer is full"
how i can increase the storege capacity, what i have now is i think 125GB

You cannot...
Have a look here to help ease your issue...
http://macmost.com/what-to-do-when-your-hard-drive-is-full.html

How can I increase my storage capacity on my macbook air

How can I increase the storage capacity of my macbook air?

Oh I know you were implying archival backup software. I was just throwing in the "on the cheap" archive option.
Back when I worked at a large unnamed institution things got archived to the power of 10 at multiple locations, the mere notion of "losing anything" was an impossibility short of a black hole opening up on earth. Even the archival managers thought it was insane redundancy, but thats the way it was.
I work off that same premise myself. I cant lose 20+ years of work.
I coined this term about 11 years ago.
Decentralized Omnipresent Data (D.O.D.)
Backing up data to:
Multiple HD in multiple locations
On multiple servers on multiple continents, private and public websites, anonymous data farms. (very easy actually)
Burned onto archival optical and magnetic storage
Have unclassified data possessed by multiple people in multiples places.
When your data becomes both everywhere and nowhere, accessible to all, destructible by none, cannot be collected together or permanently retrieved under any circumstances, you have Decentralized Omnipresent Data (D.O.D.) protection rivaling that of large governments.

How to increase the horizon (in days) for a resource

Hi experts,
I'm trying to update my resources registered in the APO Master Data so that its bucket capacity list (which currently is valid from 06.2010 to 12.2010) to become valid until 2012. However, regardless of the value registered at the field Days + the range stays from 06.2010 to 12.2010. Could anyone tell me how should I proceed?
Below is an example of a registered resource:
tab: Bucket
Resource: R
Category (Cat): P - Production
Location: L
Time Zone: BRAZIL
Bucket Dimensn: Time
Factory Calendar: 99 - International
Bucket Capacity: 1
Unit: D - Days
Number of Periods: 1
Period Type: Day
Days -: 0
Days +: 1000
Moreover, after some research I found in the forum recommendations about the usage of the /SAPAPO/CRES_CAPACITY_LENGTHEN report. However, I was not able to run it (I simply typed /SAPAPO/CRES_CAPACITY_LENGTHEN in field on the upper right of the main screen and press the Enter button. As a result, the message "This function is not possible" was available at the bottom of the screen).
I am using the version 5.0 of the APO.
Thanks in advance for help.
Edited by: Francisco Fonseca on Jul 6, 2010 6:02 PM
Edited by: Francisco Fonseca on Jul 6, 2010 6:10 PM
Edited by: Francisco Fonseca on Jul 6, 2010 6:12 PM

Hi Francisco
If you are trying extend the validity of the resource, then as you said that you tried extending the resource by extending the General data tab, and the validity of the resource still remains till 12.2010.
The validity of the resource if governed by a couple of things :
Validity as defined in R/3 Work center under capacity tab in the APO resource tab
In CFC9, you can define what should the validity of the resource be, when you are CIFing the resource.
Moreover, as you have righlty read in various posts across the forums, you can use the report /SAPAPO/CRES_CAPACITY_LENGTHEN to extend the validity of the resource. But I am not sure how are using this report. Please type in se38, enter this report and execute. In the next screen, enter the version, the resource and the location at which the resource exists. Click on execute and validity of the resource should increase.
Let me know if it helps.
Rgds, Sandeep

How to increase Serial ATA

Hi.
I'm wondering the best way to upgrade the capacity of my Serial ATA. I currently have the standard Hitachi HTS723232L9SA62 with 320.07 GB capacity. I have used all of this capacity and not sure how to increase the capacity. I continuously get messages telling me that my start up disk is full. I have deleted as much information as i can so i think memory upgrade is the best solution (already have an external time capsule). I don't really know a lot about computers so an easy memory installation is preferable. Im looking to increase my memory to about 600GB to 1TB worth of capacity. What is the best Serial ATA that will do what I want it to do? (prefer to buy from the Apple store but either way is ok)
Thanks for all your help.

Hi smonty, not sure which part of Australia you are in, but our nearest equivalent to "MacSales" (as recommended by Kappy and many others for US purchases) for on line purchase is probably "MacFixit". They stock much the same sort of range. see http://www.macfixit.com.au/shop/index.php?_a=viewCat&catId=115 for some of their hard drives.
Another good source is "Palaeographics" whose "on line" store goes by the name of "buymac" - see http://www.buymac.com.au/store/computer-addons/hard-drives-and-storage/internal- hard-drives/25-sata-hard-drives for appropriate drives, though I'd personally be wary of the Samsung models mentioned there.
To transfer your files to the new drive you are really going to need to buy an external enclosure as well to put the old drive in after installing the new one.
Cheers
Rod

How to increase your battery health - anyone with similar experiences?

this is my very own self made instruction of "how to increase your battery health"
it is the procedure how i have done it serverall times on my powerbook g4 12".
my stats: 374 cycles, health 86% (3790 of 4400mAh)
age of my mac: 57month (battery bit newer)
**if you to try this: it is on your own risk!**
**this may not be suitable for mac newbies**
**be sure to read this twice before you do it once!**
you will need:
-a pocket lamp or comparable light (to see anything on your sreen when it is dark --> light from the back through apple logo)
-coconutbattery (coconut-flavour.com/coconutbattery) or comparable programm to track your battery information in realtime
-activity monitor
-cool enviroment (to ensure your fans don't have to work that much)
-some time and patience
the intructions:
step1: load your mac until the orange light turns green
step2: disconnect the power adapter
step3: use your mac until 15-25% battery life (track this information in your menu bar)
step4: slow down your activities. the order of the following actions depend on your usage of your mac:
__close programms that use lots of cpu/gpu to ensure the fans slow down to 0rpm (!!)
__turn off everything that needs battery power: airport / bluetooth / speakers / etc.
__eject dvd or cd
__close all programms with important data
__eject idisk / .dmg files in your finder (this is not only a matter of data security)
__dissonnected from peripherals such as ethernet / internet / mouse / keyboard
__use lower brightness level
__open activity monitor to ensure that your hard drive activity is very low, may be you need to close more active programms, close activity monitor when hard drive activity is very low
__open system preferences >> energy saver preferences >> choose longest battery life
when your are ready with those actions go on and ensure you are able to connect to power adapter with your mac quickly (be able to charge - don't do it yet!)
step5: be patient. now it should take some time until your battery level goes down to 3-5%
now there should be no programm running.
do not open any programm now!
do not have a look at your dashboard!
now your mac should be really quiet:
-no fans (0rpm!)
-nearly no hard drive activity!!
-->> if this not the case break go on with step 11&12, try again in a week or two
-->> if you are ready go on with step6
step6: open coconutbattery und use the lowest brightness level
play with your trackpad to ensure your screensaver won't start. waste time until you are at 1-2% battery life.
step7: take your lamp and spot through the transperent apple logo, position your coconut battery window somehow that you can see the current battery charge und the maxium battery charge in the spot of your lamp through the apple logo.
step8: go from the lowest brightness level to the level under the lowest brightness level (a dark screen)
step9: watch your current battery charge carefully und keep on playing with your trackpad to ensure your screensaver won't start.
step10: there is kind of battery buffer made of approximately 1% (once when my "current battery charge" was 3624mAh and this kind of buffer was at 36mAh)
to empty this kind of battery buffer takes much longer as you might expect!
when your current battery charge turns under this kind of battery buffer, your maximum battery charge should change. hopefully it is higher or stays the same. when it is lower now: i'm sorry - i have warned you. may be you have to go through this 'how to' more carefully!?
step11: plug in your power adapter before the battery is cero!
step12: load until the orange light turns green
step13: if it was helpful do not repeat it more than once a week, better once a month
-->webcal://www.apple.com/batteries/images/notebook_icalreminder.ics
(via: http://www.apple.com/batteries/notebooks.html)
anyone with similar experiences about increasing battery health!?
(yes, i'm sorry for my poor english, i've tried my best)

Me too! My battery lasts for 10 minutes. It is awful and I am on my 4th power adapter since they keep breaking too.
From coconut battery: Maximum battery charge 310mah, original 4400, age of mac 45 months, 140 cycles.
From system profile:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 310
Remaining Capacity (mAh): 213
Amperage (mA): -1205
Voltage (mV): 11557
Cycle Count: 140
I went to an apple authorized retailer and they said nothing I can do if it is out of warranty.. is this true?

How to increase the font size of the report output in the printout.

Hi Team,
i have a requirement like to print the report output as a direct print from an internal table.I am using the below mentioned code, the output is printing fine but the Font size of the output text is so small so i need to increase the font size of the text of output data.
call function 'GET_PRINT_PARAMETERS'
   exporting
     immediately                    = 'X'
     line_count                     = 65
     line_size                      = 320
     mode                           = 'CURRENT'
     no_dialog                      = ' '
     release                        = 'X'
     user                           = sy-uname
   importing
     out_parameters                 = st_param
   exceptions
     archive_info_not_found         = 1
     invalid_print_params           = 2
     invalid_archive_params         = 3
     others                         = 4.
if sy-subrc eq 0.
    new-page print on parameters st_param no dialog.
could you please suggest me how to increase the font size while printing the report output..
Thanks in Advance.
Puneet.

hey,
in our system when we click on print. on widow is coming.
there is a properties button.
we click on it.
there FORMAT----AND then we select forat from there and then printing .
not sure. but check on ur system. is there properites button.
HI,
READ THIS,
You can specify attributes such as the character width and font size in the device type formatting yourself.
contact ur basis team .
in the report PRINT-CONTROL SIZE option is there. try to find more o this.

In vf01 tcode how to increase amount field decimals?

Hi experts,
   while maintain the price for the item in PR00 conditions   In VF01 THE AMOUNT FIELD IS TAKING ONLY 2 DECIMALS.
             MY REQUIREMENT IS TO ENTER MORE THAN 2 DECIMALS (3).
           HOW TO INCREASE THE AMOUNT FIELD DECLMALS.
       PLS GIVE ME THE PROCEDURE.PLS HELP ME.

Hi
The decimals depend on the currency you're using to post the bill, I suppose you're using a currency support two decimals only
If you want to use more than 2 decimals you need to define a new currency having all decimals you need.
For example I've sometime defined an internal currency EUR3, just like EUR but with 3 decimals instead of 2
Anyway this new currency is like a foreign currency so it needs to maintain the exchange rate
Max

HT1423 how to increase internal hd capacity on iMac

Similar Messages

Maybe you are looking for