HT1430 Can't send mail ( can only receive mail)
How can I receive Mai ?
Your are asking two different and opposite the questions.
If you can't send mail .... Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.
Similar Messages
-
With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.
Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.
-
I Have three Apple devices, and although I can send mail on all three, I'm only receiving mail on two of them. Can anyone advise what's the problem?
HI Ralph. There's no message at all when I try to get mail. All was working fine until yesterday afternoon - then all mail received yesterday morning disappeared from the third device (iPad Mini), and now, when I try to get mail, it just reads "updated yesterday" in my Inbox, etc. Any ideas?
-
I have my email set up, I can send, but I cannot receive mail. What could be wrong ?
SMTP is the protocol used to send mail, where IMAP and POP are the protocols used to receive mail. ISPs can have different servers for these protocols.
In this case, the specified receiving (IMAP or POP) server, or the receiving user and password credentials, are likely incorrect.
What does the Connection Doctor diagnostic tool report?
Mail.app's Window menu > Connection Doctor
To check or change the settings, select Mail.app's Mail menu > Preferences... > Accounts and select the account you need to edit in the left column.
The receiving information will be displayed for the selected Account, with either POP or IMAP shown. Confirm with the ISP that your POP or IMAP mail settings are correct per the ISP's recommendations, as well. And in general, IMAP is preferable to POP, if you have the option of using either of those with your ISP. -
TS3276 I am able to send mail but cannot receive mail. Can someone help?
I am able to send email but cannot receive mail. I am connected to internet. I can go thru Safari to receive.
Would appreciate any help.What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages -
Can't activate I messaging on my iPad. I have gone through all the steps but can only receive can't send. Can anyone help please
Hi sambanyc,
What version of Adobe Reader have you installed on your Mac?
Please try installing on a different Admin user account and check if that makes a difference.
Regards,
Rave -
My Iphone 4S isn't sending texts and only receiving some incoming text messages. My cellular data is turned on but it still won't let me use safari or any other App unless i'm connected to the WIFI at home. Any help would be much appreciated.
I think I can help with the Cell usage issue.
You may in fact have cell data turned on, but it may be turned off for specific apps.
Please go to Settings...Cellular.
First, ensure that Cellular Data is turned on.
Next, scroll down the page and you should see a list of all your apps.
Make sure Cell data is turned on for the apps in question. -
How can I send purchase order through SAP mail ?
How can I send purchase order through SAP mail ? Can any one explain whts the NACE settings?
just do it as <b>Anji reddy</b> said to you ...or else ... in the purchase order trascation ...print it ... so that it will generate the spool request for that purchase order ....
so the the belwo program is for sending <b>the Spool Request data as Email to any Email id ...</b>
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note for the below program to process a spool request the program must be executed in background otherwise no spool request will be created. Once you have had a look at this there is an modified version of the program which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Girish -
After installing iOS6.1.1 I can't send massages to an e-mail account
After installing iOS6.1.1 I can't send massages to an e-mail account
Several users have reported this -- here is a long thread: [https://support.mozilla.org/questions/1006704 verizon email..can't reply to emails says null status:404].
At this point, no one has posted a diagnosis of why this function is no longer working in Firefox 31. Unfortunately, with hundreds of changes in each version, it is difficult to track down without "hands on".
In the meantime, if you need to use Firefox for your Verizon mail, you have the option of reinstalling Firefox 30 (so long as you know there are security implications). See: [[Install an older version of Firefox]]. -
How to keep same sender file name for receiver mail attachement
Hi,
i am working with File to Mail scanario. There i want to pick a flat file from native file system and then send it as email attachment. Now i am able to send the file but the flat is getting converted as an xml file. is there any method to keep the same sender file name and type for receiver mail attachment. i am not using any mail package. i am using XI payload and keep attachments.
Thanks in advance.
-SivaHi,
Yes,With out using the mail package u can send the Mail Attachments to the receiver side,
In that case no need of Integration Repository objects.
Chck this links.
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/community.user/blog/2006/09/07/email-reporting
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
If u dont get ur requirement then let me know ur Mail id i will send u a Doc.
Regards,
Phani
Reward points if Helpful -
Mail package in receiver mail adapter
Hi ,
I am trying to put XIPAYLOAD with <b>USE mail package</b> option.I have gone through the blogger posted my Michal on this...
when I download the Document mentioned in the blog for mailpackage to create the message do I need to use the <b>namespace</b> "http://sap.com/xi/XI/Mail/30" as it is or I need to replace the namespace in the document with my namespace...
some one could you please explain it little clearly...what is the use of this namespace..and how do I exactly proceed to make use of this document...
Thanks a lot.....hi
There are several scenario's
have a look at following :
/people/sap.user72/blog/2005/05/02/useful-sap-notes-for-xi
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
and for further
you can follow
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
i hope this will help you.
Pls : Reward points if helpful
Vishal -
My mail will not receive mail. It seems the last mail I had was 24th Dec but I have got the mail on my ipad and iphone ok. If I connect via safari I can get mail ok. I tried deleting old mail, no change.
Not so fast ;-)
How many email accounts are you using with Mail.app?
In the left-hand panel of the Mail window, under "Mailboxes", you can see (beneath other things) the inbox(es) of your account(s). Is there some sort of sign/logo displayed to the right of their names? Is it possibel that you have taken it/them offline by accident? -
After I downloaded Yosemite I can no longer send mail with my google account only receive mail
I installed Yosemite and I wish I had waited , I can now receive mail on my google account but can't send
I just get the drop down box with Google off line try another server
My laptop works fine but that still has maverick on it any help would be appreciated.
I have already deleted all my mail accounts and rebooted but no luck after reinstalling mail as per laptop installationWell, it happened again.
This morning I was sending out a bunch of emails and around the 10th one they started kicking back.
This time I did not fool with any of the settings on my computer.
I turned off both the modem and router. Started them back up and the problem still exists.
The last time this happend, about a week ago, it started working again within an hour.
This problem ony crops up when I am sending many emails at the same time
Throughout the rest of the week it works fine.
This time I by-passed the router and the mail will go out.
So it looks like someting is going on with the router.
Whenver I hook the router back up, outgoing mail will not work.
It says it cannot send mail using my server.
I double checked all of my mail setings and nothing has changed
I also did a hard rest on the router, but it did not help.
Again this problem is with 2 computers.
I have an early version of Airport Extreme Model A1143.
It's around 5 years old.
Whenever I call my ISP they claim everything checks out on their end and they don't offer any help.
I am sure if I leave the router unplugged for a day or so, it will start working again.
Is there any way a router can break down and allow incoming mail and internet but not outgoing mail?
I am am at wits end with this problem.
I would be willing to go out and get the latest Airport Extreme if I knew for sure it would cure this problem. -
Can only receive mail, not send while in hotels, OK at home
Something isn't configured right but for the life of me, I can't find it. Mail (Connection Doctor) can see my smtp server and ISP home server, but can't send to it. Mail sits in the outbox.
What you need to ask your ISP, likely, is whether they have an Authenticated SMTP for use when connected remotely. With a good many cable ISP, the SMTP is authenticated using the IP address of the modem they supply you, and not Password Authentication -- is this the case for you?
At the same more, and more providers of connection at hotels, WiFi spots, etc., are blocking Port 25 for third party SMTP, but you will be able to use Port 587 in most cases, and Port 465 in some cases, at those locations. But to use either of those ports, the SMTP must be one that is separately authenticated via Password authentication. Thus if your SMTP is authenticated by reference to the IP of your home modem, it won't work of any Port but Port 25 and from home.
One of the attractions of a Gmail account, or a .mac account, is that they also have an authenticated SMTP which works easily from remote locations.
Who is your ISP, or the provider of your email account and SMTP?
Ernie -
I've had no issues for the past 2 years but suddenly I can't send email from my hotmail accounts via applemail.
I've deleted accounts and readded them. I've checked all the mail settings are correct. I've disabled any antivirus software. I've done this repeatedly, but still get the same issues.
The only thing i have changed in the last week is that I have switched to a fixed IP address as I needed this for my business.
Can anyone help please?Hey,
I found this worked for me, just check your hotmail settings are as follows
You change your POP to IMAP like this
Outlook.com does support IMAP and SMTP.
Incoming server:
IMAP: imap-mail.outlook.com
Port: 993
Encrypted Connection: SSL
Outgoing server:
SMTP: smtp-mail.outlook.com
Port: 25 or 587
Encrypted Connection: TLS
Username: Your Username
Password: Your Password
This won't work on mac os x mail unless you disable pop in your outlook.com account first. If you have mac os x mail, and you don't disable pop in your outlook.com account first, mail will automatically setup pop and smtp.
http://answers.microsoft.com/en-us/windowslive/forum/mail-email/how-to-set-up-ma c-mail-to-sync-your-outlookcom/afdfe981-20c7-4d4a-b6b1-9329b27f018a?tm=137900934 3708
http://answers.microsoft.com/en-us/outlook_com/forum/oemail-osend/how-to-set-up- mac-mail-to-sync-your-outlookcom/afdfe981-20c7-4d4a-b6b1-9329b27f018a
Maybe you are looking for
-
HP Photosmart 5514 all-in-one printer. Control copy function from computer?
I have a HP Photosmart 5514 whose touch screen is no longer working properly. It doesn't recognize any selection at the bottom right of the screen. I can touch any other place on the screen and it will respond. Because of this I'm no longer able t
-
I just put together a new computer, since the first time I started it up for the first time my display drops out after 30-60seconds. I swapped out the video card with a know working card and the system is perfectly fine so I know it is something with
-
I am not sure if this issue belongs to this forum. If not, please let me know and I will post it in the appropriate forum. My application has clustered remote SLSBs with "FirstAvaliable" policy. The BMP Entity Beans are set for cache invalidation as
-
How can I send a parameter to a RFC function in c++ code (in eDM develop)?
Hi, I am expanding Easy Document Management 6 SP14 via c++ code and I am trying to send a parameter value to a RFC function. I have succeeded calling a RFC function that requires no parameters. I have a pointer that points to the function, but I coul
-
Adobe Photoshop CS6 Running program
So, I opened a big .psd document and I worked on it for a while. I restarted my pc, and the Photoshop CS6 crashed, then after restarting the PC Adobe Photoshop CS6 was trying to open the autosave from last time, and then it showed me this error: Coul