HT1430 cannot see Ipad in itunes after restore?

I restored the ipad mini, my computer now asks for drivers and cannot see ipad in itunes.
ipad shows an itunes symbol with cable on screen
any ideas how to sort ?
cheers

reinstall itunes
https://discussions.apple.com/message/21995151#21995151
and then restore your ipad after

Similar Messages

  • Ipod nano 7th gen cannot be detected by Itunes after restore

    Following the recent death of my Macbook Pro (due graphic card problem) I've switched to my backup laptop and moved all my files to the windows 8.1 laptop. I knew that connecting my Ipod Nano (7th Generation) to the new laptop would result in losing all my playlist and music currently stored.
    I needed to update my ipod's list with new things so I took the chance (innocently thinking that all I needed to do was just remake my playlists and re-sync it). Initially it started off well, but towards the later parts of restoring, iTunes gave an error saying that the restore could not be completed and led me to a thread on Apple Support. Following the steps, I disconnected my ipod and reconnected it. Nothing happened. Itunes did not recognize the ipod, and the ipod goes into a grey looking screen with a simple message that says okay to disconnect.
    My question is, how am I suppose to restore my ipod, when itunes can't detect my ipod.
    I've been struggling really badly with the loss of my Macbook Pro and now this. Can someone help me? Thanks in advance
    Currently running on Windows 8.1 and iTunes version 11.4.0.18

    Hello there, lycusfenriz.
    It can definitely be frustrating when your having trouble with multiple devices at the same time, but the steps in the article below may help with getting your iPod recognized in iTunes. The following Knowledge Base article offers up some great, in-depth recommendations for troubleshooting an iPod not being recognized in iTunes:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Connectivity/syncing
    Follow these steps if your computer doesn't recognize your iPod or you have issues with syncing your iPod.
    iPod not recognized by iTunes or computer
    Make sure you have installed the latest iTunes software from www.itunes.com/downloads. Try connecting to a different USB port on your computer. Your computer needs a USB 2.0 port or a USB 3.0 port to connect iPod nano. If you have a Windows PC that doesn't have a USB 2.0 port, in some cases you can purchase and install a USB 2.0 card.
    If iPod nano is connected to a USB hub, try connecting iPod nano directly to your computer's USB port.
    iPod nano might need to be reset. Reset iPod by holding down the Sleep/Wake button and Home button until you see the Apple logo appear.
    If you're connecting iPod nano to a portable computer using the Lightning Cable, connect the computer to a power outlet before connecting iPod nano.
    Check the cable connections. Disconnect the cable at both ends and make sure no foreign objects are in the USB ports. Then reconnect the cable.
    Try reinserting the Lightning connector into the iPod. The Lightning connector can be inserted either way.
    Try restarting your computer.
    If none of these steps resolves the issue, you might need to restore the iPod nano software.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I restore my US version  iphone 5s  by connecting itunes after restore it shows hello and select country, and activation, but it does not activating why? is it work in china ?

    i restore my US version  iphone 5s  by connecting itunes after restore it shows hello and select country, and activation, but it does not activating why? is it work in china ?

    If the iPhone is locked to a US carrier, you cannot use the SIM card of another carrier on it to either activate it or use the iPhone.
    If you want to use your iPhone with China unicom, you need to get it unlocked by your US carrier.  Contact them to see what their unlocking policy is and if you qualify.

  • I'm trying to reset my ipad from ITunes after i disabled it but it keeps telling me that it can't complete it because it has a passcode please help!!

    I'm trying to reset my ipad from ITunes after i disabled it but it keeps telling me that it can't complete it because it has a passcode please help!!

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen

    help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen.
    pls help me recognize my iphone4 to itunes and bring back my iphone 4 the way it was before. THANKS!

    Hi my iphone 4 is also having the same problem of hanging with the same screen reflected. itunes keep suggesting me to do a restore setting but it fails to restore after running half way. Have u solved your problem ardy..? Hw can i / we do about it...?

  • Cannot sync ipod with itunes after setting up new computer with newest version of itunes

    Cannot sync ipod with itunes after setting up on new computer, only songs which tansferred were songs bought on new computer after set up, tried to sync songs and it deleted old songs from ipod.  How can I get them back on ipod??  They are showing in music library on itunes still.

    If the iPod database gets corrupted, it will add files to "Other" instead of where they really belong.
    Restoring the iPod will erase this database and recreate it.
    And if I do this, won't I just have the same issue when my iPod is re-updated to the most recent version again?
    No, it shouldn't. This is why you Restore the iPod. It erases the corrupt database.

  • How do i sync my ipad to itunes to restore my passcode

    how do i sync my ipad to itunes to restore my passcode

    When you connect your iPad to your computer, select your iPad from the devices list in iTunes. You will see a series of tabs in the window that say things such as; "summary," "info'" etc. select the "Apps" tab. From here, you will see a long list of all of the applications in your iTunes library. On the bottom of the list, you will see. checked box that is followed by the statement, "Automatically sync new apps." Uncheck this box. Now, in the list of the apps in your library, you will see that everything already has a check next to it. Uncheck the apps that you do not want to sync. The next time you sync your device, it should only sync the content that you have selected. Beat of luck.

  • Cannot activate my iphone 3gs after restoring it to ios

    cannot activate my iphone 3gs after restoring it to ios

    The typical cause is that the device has been hacked or jailbroken.

  • I cannot see 'Subscribe to iTunes Match' in menu

    In spite of all the latest updates I cannot see' Subscribe to Itunes Match' in the Store menu. Help

    That will be it then. Im in the UK. Should be made more obvious on the site. Thanks

  • HT1923 cannot see device in itunes

    How to sync when I cannot see device in itunes?

    Hi hacorvalan!
    Here is an article that will help you troubleshoot this issue with iTunes on your computer:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • HT203977 Are there any ways to reverse 'Restore from Backup' option on iTunes after restoring?

    Are there any ways to reverse 'restore from backup' on iTunes after restoring was completed? My last backup was actually a year ago, I think I've lost all my contacts and photos from a year ago till now. Any way to recover this?
    i haven't been using iCloud or Google contact as backups either.
    please help.

    No, unless you have a later backup.

  • How can I see my ipad on itunes after cut the restore?

    I was restoring my ipad then I accidently closed the itunes by Task Manager and now I can't see my ipad in itunes or any similar program but when I plug my ipad to the PC I can hear the alert means it's plugged , and I can see it in Device Manager , and I can't put it in DFU mode or anything else because I have no screen or home&power button.
    sorry for my English.
    t

    Hello moamal,
    Welcome to the Apple Support Communities!
    I understand that when you connect your iPad to your Windows computer, iTunes does not recognize that it has been connected. For this situation, I would recommend working through the troubleshooting steps outlined in the attached article to resolve this. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    Cheers,
    Joe

  • IPad 3 frozen after restoring in iTunes

    I'm new to this...less than a month old iPad. It has been frozen for 18 hours after trying to restore in iTunes. I have read discussions and nothing works. Any ideas? Thanks.

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • HT1414 After updating to iOS 6, cannot connect iPad to iTunes

    Did a backup to iTunes and upgraded to iOS 6 on my iPad.  After the update was complete and ran the setup on the iPad, I tried to restore from iTunes and was unable to connect the iPad and get the following error message:
    iTunes couldn't connect to this iPad.  An unknown error has orcurred (0xE800000A)

    Hey Ron,
    If you are getting the 0xE800000A when connecting your iPad to iTunes, check out the following article that will assist with getting that sorted out for you.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/ts3221
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Cannot see devices in iTunes

    I cannot see my iPad or iPhone in iTunes when I connect via USB. The software on all three is up to date. My computer recognises all three (iPhone and iPad are visible in C: drive). iPad opens Real player once I plug in.

    Device not detected in iTunes for Windows

Maybe you are looking for

  • End Routine - populating Target Field based on Master Data

    Hi, I have an issue with my End Routine in BI 7.0. The scenario is as follows.... The Target-Fields ZSALES_OFFICE , 0SALES_CHANNEL etc. are being mapped 1:1 from their respective source fields. In addition to these target fields I have a target field

  • Printing to PDF in Elements 11

    When I go to print to Adobe PDF (one of selections under printers) the program does not respond. I have acrobat installed.  what can I do to print to pdf rather than printer.

  • Adobe Photoshop CC + Lightroom CC are displaying blacks with a green tone.

    We did a monitor calibration a couple days ago with an EyeOne, same we have used many times and all went well. But now we have noticed that Photoshop and Lightroom are displaying blacks with a green tone over them. If the image is saved and viewed in

  • SOAP1 - SOAP2 - SOAP3 BPM scenario

    Hi Experts, This is continuation of the below thread. SOAP -> SOAP -> SOAP BPM scenario SOAP1 -> SOAP2 -> SOAP3 BPM scenario BPM Steps 1. Receive Sync Step -> Receive the SOAP1 request inside BPM. 2. Send Sync Step ->  Send SOAP2 request and get the

  • Dual nic's, dual networks, setting this up? [SOLVED]

    Hi, I have a laptop with wireless (rt2500) and wired nic. Both work fine, but I am in a situation where I need to connect the wireless to one network, and the wired to another network. (Wireless to the internet, and wired to small home network). Im n