HT1430 Help with on/off & reset

I've tried to turn off/on my iPhone4S, but it's not responding.  When plugged into a power source the apple appears for about 10sec, then fades away to a black screen, then reappears after 3-5sec.  That's all I can get it to do....please help

You probably have to put it in recovery mode now and restore it. Something went wrong when you updated the iPad. If you backed up before you updated the device, you will be able to restore the backup, sync with iTunes and you should be fine.
Try a conventional restore first. This explains how to do it. Read all the way to the bottom and see the section unde Additional Information for the link to Recovery Mode.
http://support.apple.com/kb/HT1414

Similar Messages

  • Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

    need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

    Hi,
    As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords.  Your best option would be to contact HP regarding this.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Help with turning off in-camera selected aspect ratios - Please!

    I shoot a Olympus e-P2. It allows me to change the aspect ratio of the file i.e. 4:3, 16:9 etc. I like to use this feature as 'masks' when I shoot to help with composition. When I open the RAW file in bridge or Camera Raw, this pre-selected aspect is automatically cropped from the file. I want to see the entire file, not the cropped version. The Oly software gives me this option, but I can't figure out how to turn off this 'feature' in Bridge or Camera Raw. Any help would be greatly appreciated.

    Your adobe product is only doing what the camera data told it to. However, in the raw converter you can try activating the crop tool then right click the image and choose to remove the crop. That may work (or not).

  • HT1430 help with resetting Iphone

    how do I reload my setting back to Iphone

    Just what do you want to do?
    If you want to restore from backup see:
    iOS: How to back up

  • Help with turnig off nano and short songs (PLZ HELP!!!)

    i have no idea what any of this stuff is with discussions but i need help.
    1) my iPod won't turn off. I have held down the pause/play buttin and have also left it alone on pause for over an hour and it still wont turn off. all other buttons work just fine. the play/pause button still plays and pauses when i push it but it just wont turn off.
    2)some of my songs are cut short by about 30 seconds at the end. down at the bottom of my iPod, it says the full time, but when it has about 30 seconds left, it goes to the next song
    PLEASE HELP!!!! I HAVE NO IDEA WHAT TO DO!!!!!!!
    MA005LL    

    i have the same problem, i can't turn off my nano, when i trying to turn it off it take no effect(pressing a play\pause button for 10 seconds wont't turn it, when i take off my finger from button it just "pause"). I'm tryed to fix this problem by reinstalling ipod update, reset from ipod menu have no effect, when i go to ipod test menu i reset it... guys plese help me can't stand when something goes wrong. Thank you for replying

  • Mod help with SN margin reset?

    Hello.
    Lost about half my download speed about ten days/two weeks ago, the weather me thinks caused a few glitches. Im sure its the noise margin not resetting. I have tried to power cycle the hub, alas to no avail.
    It's an old white hub with phone.
    Connection has been stable for past 10 days only my own turning off the hub twice in vain atempt to try and force a reset.
    Hoping you guys can check my hub stats and point me to the mods if appropriate.
    Thank you.
    Link Information
    Uptime:
    3 days, 21:54:03
    Modulation:
    G.992.1 annex A
    Bandwidth (Up/Down) [kbps/kbps]:
    448 / 2,080
    Data Transferred (Sent/Received) [MB/GB]:
    347.54 / 5.29
    Output Power (Up/Down) [dBm]:
    12.5 / 17.5
    Line Attenuation (Up/Down) [dB]:
    31.5 / 58.0
    SN Margin (Up/Down) [dB]:
    15.0 / 15.0
    Vendor ID (Local/Remote):
    TMMB / IFTN
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    1 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    Error Seconds (Local/Remote):
    1 / 0
    FEC Errors (Up/Down):
    0 / 39,756
    CRC Errors (Up/Down):
    0 / 110
    HEC Errors (Up/Down):
    0 / 95
    Line Profile:
    Interleaved

    Hi Frazzlejack,
    Thanks for the post.  I am more than happy to help you.  Can you send me your details via email please.
    Click on my username (SeanD), you will find the 'Mods contact link' under the About me section of my profile.
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Help with Subscriber Services Reset

    What are Subscriber Services on iPad? and where would I find the 26 digit Authentication Key?

    Bt mods reset the noise margin yesterday. So far been stable with an extra 5mb of speed on the download. Very happy with the result. Thanks to all for thier help, i will post router stats again so a difference can be seen. The reason the connection time is so short is because the power went out this am and im not long up to turn it back on.
    ADSL line status
    Connection information
    Line state    Connected
    Connection time    0 days, 0:09:54
    Downstream    19,815 Kbps
    Upstream    1,223 Kbps
    ADSL settings
    VPI/VCI    0/38
    Type    PPPoA
    Modulation    ITU-T G.992.5
    Latency type    Interleaved
    Noise margin (Down/Up)    6.1 dB / 6.1 dB
    Line attenuation (Down/Up)    16.5 dB / 8.5 dB
    Output power (Down/Up)    0.0 dBm / 12.4 dBm
    Loss of Framing (Local)    0
    Loss of Signal (Local)    0
    Loss of Power (Local)    0
    FEC Errors (Down/Up)    0 / 0
    CRC Errors (Down/Up)    1 / N/A
    HEC Errors (Down/Up)    N/A / 0
    Error Seconds (Local)    1

  • I Phone 3GS - help with turning off 3G version 5.5.1

    I have been to settings/general/network as suggested in other topics, but I do not have a 3G on/off button.  I have cellular data (on), data roaming (currently off), personal hotspot(currently off), wifi (on) and VPN(not connected).
    If I turn wifi off then 3G automatically comes up.
    I am going abroad and do not want my phone to  access 3G, just need it for phone messages.
    Can anyone help me please.  Thank you.

    Connect to iTunes on the computer you usually Sync with and Check for Updates.
    Yours is an iPhone 3Gs and will update to iOS 6.1.6

  • Help with Bios Password Reset Service

    I am trying to use the Bios Password Reset Service for Power On password and Hard Drive Password. The current setting in the Bios is "Enabled, In Progress". The Bios sidebar help tells me that in order to complete registration for this function to open the Create Recovery Media application and "follow instructions". I am lost, there is nothing there about the Password Reset Service. I have already created the Recovery disks and even a Rescue Media disk.
    I have found that in the Client Security Solution application, under the advanced tab there is a "Setup Hardware Password Reset" function but it is greyed out!
    Since this function is available for selection in Bios shouldn't I be able to use it?
    I am using the Windows logon password recovery function in Client Security with no problems.
    Any ideas??
    Thank you!!
    Installed BIOS: 7LETC5WW (2.25-1.08) Release Date: 2009/01/08
    Client Security Solution version: 8.20.0023.00
    PS. I don't want to circumvent any passwords, I just want to activate the Hardware Password Recovery function in case I ever need it.
    Message Edited by DAF on 02-09-2009 08:52 AM
    E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
    T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64
    Solved!
    Go to Solution.

    UPDATE:
    In case anyone cares, I was finally able to figure out how to activate the Hardware Password Reset feature in my T61. Here is the solution, at least in my case:
    1)Found the file in Program Files->Lenovo->Client Security Solution->HwPwReset.exe
    2)Ran the file and followed the instructions
    3)A "Secure Environment" was created in the hardrive and the laptop restarted
    4)The laptop booted into the Secure Environment where I was asked to establish 3 security questions and answers.
    5)The laptop restarted and the status of the Pasword Reset function in BIOS changed to Registered.
    Now if I ever forget the Power-on or Hardrive passwords all I have to do is press F12 on boot-up, select Password Reset option, answer my security questions and voila, passwords are reset or removed. Very nice!
    BTW, I called Lenovo technical support twice and after talking to 3 "techs" and one supervisor they had no clue on how to do this. Go figure!
    E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
    T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64

  • HT4528 hello, i need some help with turning off the 'find my iphone'

    I just traded in my iphone for the 5s and Verizon is having some problems deactivating the find my iphone thing on my old phone however it still has it linked up with my old email address that was stolen from me, how do I reset it so I can use my current email address to use my current password?

    There is a link to download App Builder when you sign in to the DPS Dashboard (http://digitalpublishing.acrobat.com). There is also a link on the DPS install help page.
    http://helpx.adobe.com/digital-publishing-suite/help/installing-digital-publishing-tools.h tml

  • HT1430 Help with Facetime

    We are trying to use Facetime. It keeps telling us it to check our network connection.  Everything seems to be running and we can't figure out why Facetime isnt working.  Any ideas?

    Apparently you are not connected to wifi.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Help with cleaning off a 23" Apple Cinema display HD

    Ok guys, I work with LCD's for a living, but mine are a bit different than the Apple monitors (plus, this is my dime, not my companies..). So, I come home to find out our "house guest"'s kid was flinging gogurt all over the place. I look at my LCD's and sure enough, both have someone oily on them.
    I cleaned the dell with no issues, but my 23" Apple Cinema Display HD, has a couple of marks that won't come off (I used water and a micro fiber cloth to clean it). It's like two little oily spots about the size of the tip of a finger, and one little line in the bottom right corner.
    At work, normally we would use denatured alcohol to clean the LCD surface, but I'm quite familiar with the LCD's at work, and what is attached to the polarizer. My Apple display, I'm not so sure, so I don't want to use something on it that is going to damage the surface. Any recommendations? The areas that have the issue don't seem to have any display related problems.... They aren't finger clusters, and the polarizer doesn't look damaged.
    thanks! And yes, the house guest was informed what this monitor costs to replace.... and I threatened to chop off fingers (kidding).

    Apple say not to use alcohol or ammonia. Dilute some hand dishwashing liquid. Moisten a facial tissue with it, and rub gently. Then use several facial tissues moistened with just water to remove the detergent residue.

  • Help with turning off bold text when I use asteris...

    Hello. I have an extremly annoying problem and that is that when i put * at the start and end of one or more words *like this* the message appear as fat letters like this.
    It has never been like this before. Please help me get rid of it.
    Subject/title amended to add detail.
    Attachments:
    wai skype.png ‏5 KB

    http://community.skype.com/t5/Windows-desktop-client/Switch-off-Bold-and-striked-text/m-p/3638717/hi...

  • Need help with deleting and resetting admin user

    I have a problem with the admin user on my computer. Here's the background: My computer started making popping noises. I found that the popping stopped when I switched to a different user account. I have repaired permissions and reset the PRAM, but this did not fix the problem.
    Can I fix this user problem by deleting some or all preference files, or by some other means?
    Or...how do I set up a new admin that has all my old settings and files from my original admin? I have never done this before and am very nervous. I have charged ahead to fix things before and then discovered that I erased important files! so I am going to be patient (sort of) this time.
    I have a backup of the drive that my user data is on, as well as a clone of it for booting.
    Any suggestions on ways to make this less painful are appreciated.
    Nathan

    Nathan:
    Here is what I suggest:
    1. Create an admin account that will be strictly an admin account. i.e. you won't be using it for anything else but to administer your computer. Here's how:
    Go to the Apple Menu, System Preferences, and open up the Accounts panel. Click the to add an account, and check the box to let that user "Administer this computer." You are temporarily creating a second admin account. Be sure you give it a good password and that you remember it! Now, log out. Don't just do a fast user switch. Log out completely, then log into the new admin account you just created. Go back to System Preferences, Accounts, and find your original user. Uncheck the box for that account that allows it to administer the computer. You've now changed your regular account into a Standard account and you've created a new admin account that you'll hardly ever use. That's the point: only use the admin account when you absolutely need to.
    Log out of the new Admin Account and into your former Admin Account, now Standard account. Check your access to the folders in your account. If you get notes telling you that you do not have sufficient privileges that can be corrected.
    Post back and let me know.
    Good luck
    cornelius

  • Help with tabs, I reset but doesn't fix problem when started again

    When started the new tab is blank and doesn't show the 9 previous pages like before. I have gone to help the troubleshooting and then reset Firefox. This works until I shut down Firefox although when I start a new session the New Tabs are Blank again.
    please help.

    Is the new tab page completely blank or is there a little 9-square icon on the right side? If that's there, can you check your history and make sure your history wasn't cleared?
    In the future, you shouldn't need to do a full reset to edit this preference. In fact, it would be helpful to take a look at what is there when this problem occurs. This involves using the about:config preferences editor:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
    (3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
    * ''Page thumbnails (default)'' => about:newtab
    * ''Blank tab'' => about:blank
    * ''Built-in Firefox home page'' => about:home
    * ''Any other page'' => full URL to the page
    Press Ctrl+t to open a new tab and verify that it worked. Fixed?
    If it's fixed temporarily, does it stick until you exit Firefox and restart it? Sometimes preferences will be changed at startup by a user.js file. This file isn't created by Firefox, but can be created by a user or third party software to override your regular settings. To check for a user.js file, try the steps in this article: [[How to fix preferences that won't save]].

Maybe you are looking for