HT1430 Hi! Re: email. I add account and it shows up. On mail, contacts, etc. page. But it fails to show up as an account when try to get or send massages.
So where is this ios switch and i haven't resigned on for year. I guess to learn exchange again also. Why so difficult?
First thing I would do is reset: hold down the home button along with the power button until you see the Apple, then let go. See if that jogs it into shape.
Similar Messages
-
Cannot send email from pop account when in 3G, will send in WIFI
I cannot send email from pop account when in 3G, will send in WIFI.
I thought it was the SMTP server first.. but when i config my WIFI, suddenly the emails that i tried to send, left my outbox and sent.
Any idea'sThe SMTP server you are using with Wi-Fi would be the outgoing server of your internet service provider... this is likely why that's working.
SMTP servers specific to a ISP would not work on the 3G network. You would probably need another SMTP server. One from your cell provider? -
I had to change my email passwod so now have to do the same on the ipad. when I go to settings--mail contacts etc.- I can see my email accounts but I am unable to click on them to change them. they appear light gray instead of bold black. how do I activate them so they are accessable to change the password?
I had to change my email passwod so now have to do the same on the ipad. when I go to settings--mail contacts etc.- I can see my email accounts but I am unable to click on them to change them. they appear light gray instead of bold black. how do I activate them so they are accessable to change the password?
-
How do I unlock my email in my iPad? The grouped email page (I have 3 accounts) shows an item as downloading, but never makes any progress. I also can't get to Mail, Contacts, etc. under Settings. Have reset the device numerous times.
There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them: -
In preparing for iCloud storage to be reduced to 5GB, I have deleted all my emails (via internet to iCloud) including all inboxes, sent mail, archived etc. HOWEVER my iPhone (under Settings>iCloud>Storage and Backup>Manage Storage says I have 8.5 GB. Please help!
The only thing I can think of that may cause this would be storage buffering. See http://support.apple.com/kb/HT4873.
-
My wife and I both have MacBooks (I have MacBook Pro and she has Air) and both are associated with my apple ID since I bought them. However, this means that Safari is linked for both her and I as well as our contacts etc. Can I still use mine ID for apps for her but associate hers with her own ID that I have yet to make?
Well with the MS Hotmail/Outlook.com account that is hard. But she should be able to link all of it to the iCloud system using her Apple ID.
I suggest you do a Google search for "link contacts, Calendars, iMessage with iCloud".
For some stupid reason MS has limited the syncing/linking of only emails and Notes with the Hotmail/Live Mail/Outlook.com system.
They have not included any Exchange features for syncing all that info. That is unless you are using Outlook 2013 and that is only for Windows. -
When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can replace it with my ID in Mail, contacts etc. The ID I get without wanting it, I can't find anywhere. I have to delete it. How do I solve this problem, anyone?
My content was obtained through another ID, which popped up earlier. Now this one doesn't pop up, and my current ID doesn't pop up either, but another one. How do you find an ID which is not in the store, and not in Mail, contacts etc. either?
Or is it possible to write the ID yourself when you want to buy something, not only to have it popped up being unable to be changed? -
how to install when I keep getting the following massage on windows 7 64 bit with or with firewall on and with or with virus protection on here is post " This installation package could net be opened verify that the package exist and that you can access" same when trying to install quicktime
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
i just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!
Is the status light green?
Your Airport device may be in Bridge Mode.
Airport Utility 6:
Open Airport Utility, select the Airport Express and click Edit. Navigate to the Network tab and change Router Mode to DHCP and NAT. Then click Update on the bottom right.
Airport Utility 5:
Open Airport Utility and click Manual Setup. Navigate to the Internet icon and change Connection Sharing to Share a Public IP Address. Then click Update on the bottom right. -
I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?
Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg -
I was researching information for a class and I clicked on a website that said that all of my files had been encrypted. A popup appeared and asked if I wanted to leave the page but when I tried to, it would let me. I had to force quit Safari in order to do so. How do I know if this is a real problem or not?
It's a JavaScript scam that only affects your web browser, and only temporarily.
1. Some of those scam pages can be dismissed very easily. Press command-W to close the tab or window. A huge box will pop up. Press the return key and both the box and the page will close. If that doesn't happen, continue.
2. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and uncheck the box marked Enable JavaScript. Leave the preferences dialog open.
Close the malicious window or tab.
Re-enable JavaScript and close the preferences dialog.
3. If the Preferences menu item is grayed out, quit Safari. Force quit if necessary. Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize. -
How do I resize the window of pages in the new version? It takes up most of my desktop. I would like to make it tall and narrow, which was possible in the old pages, but I cannot seem to do it in the new version.
I agree it is a very bad and wasteful design especially for users on small laptop screens.
You can drag it to whatever shape you want from the bottom left corner.
Click on the paintbrush to make the Format side panel disappear. However you will need to use that side panel for most formatting.
Peter -
hey i have an ipod touch 5gen ,it has stopped responding and is showing a blank black screen.when ever i connect it to itunes it gives a sound of the connection. what am i suppose to do?(ios7)
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi I have set up iCloud with Outlook 2010 where this bound notepad calendar contacts etc.. but when you go to schedule a meeting in outlook is below the hour. agendo eg a meeting from 13:00 to 14:00 and iCloud in outlook calendar leaves at 14:00 to 15:00.
If I could call serious alguine friendly thanksHi I have set up iCloud with Outlook 2010 where this bound notepad calendar contacts etc.. but when you go to schedule a meeting in outlook is below the hour. agendo eg a meeting from 13:00 to 14:00 and iCloud in outlook calendar leaves at 14:00 to 15:00.
If I could call serious alguine friendly thanks -
My past and future appointments have disappeared from my iPhone calendar, but they are still synced to my iPad. How can I get them back on the iPhone? Thank you
Go into the iCloud settings and make sure the calendar sync is on
Maybe you are looking for
-
No matter how much times I put in the right security code it says invalid security code and I can't get any fun apps and only have a lil bit and it's boring I need more
-
Crystal Report XI Error:717
Error:717 Hi, We use Crystal Report XI developer with Oracle 10g. Our Oracle Client is Oracle 10g and the Oracle server is Oracle 10g. Our application develepor tool is CodeGear RAD Studio, Delphi 2007 Enterprise. The Crystal Report use the Native Or
-
Error in Mail configuration - parameters cannot be converted.
Hello All, I have configured the mail configuration in 4.6d as per the notes 455127, 99965. but when i try to send the test mail i got the error Cannot process message in node, parameters cannot be converted ... Can any one please help me.... the tra
-
Autofsd: /usr/sbin/automount terminated with signal Abort trap: 6
This is 100% recreatable. All I have to do is type: sudo automount -vc or plug in a USB drive. 4/11/12 8:09:32.959 AM com.apple.autofsd: Assertion failed: (strlcat((mntops_out), (","), (optlen)) < (optlen)), function process_fstab_mntopts, file /Sour
-
Hey, In case of multiple queues in BPM. say for instance multiple queues(random) When we check in SXI_MONITOR, in the QueueID column we get : XBPE_TaskId_No_QueueId. Please can you tell me what is the significance of "No"