HT1430 How can you restart your iphone if your lock button does not work?

How can you restart or turn off your iPhone if the lock button does not work?

The best way is to let the battery die. Or you can reset the phone settings which restarts everything.

Similar Messages

  • How can i undisable a iphone if  the home button does not work

    i have tried every thing possible

    The best way is to let the battery die. Or you can reset the phone settings which restarts everything.

  • How can i restart my phone if the power button is not working?

    My power button is not working and my phone freezes every now and them. I read I should restart it. Is there another way to restart it without using the power button?
    Also, I use the on-screen assistance icon but it does not have a power off option.

    demeece wrote:
    My power button is not working and my phone freezes every now and them. I read I should restart it. Is there another way to restart it without using the power button?
    Also, I use the on-screen assistance icon but it does not have a power off option.
    That's correct.  Because how would you turn it back on again if the screen was off and your power button was on the screen?
    Yo need to fix the button, or try letting the iPhone die out completely, then connect it to power and after it's charged for a while, see what happens when you press the Home button.

  • I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon

    I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon

    Alread asked and answered in your previous post - please do not post the same thing multiple times in multiple forums.
    https://discussions.apple.com/thread/5164919

  • My iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

    my iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

    Hi, braidenwhitesidemate. 
    Thank you for visiting Apple Support Communities. 
    I would recommend going through the steps in the article below.  If the issue persists, see the section labeled Issue not resolved.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    Jason H. 

  • I bought this ipod 4 from a friend the lock button does not work and he doesnt know the password? how do i reset and i cant use my computer????   HELP!!!!!!

    i bought this ipod 4 from a friend the lock button does not work and he doesnt know the password? how do i reset and i cant use my computer????
    HELP!!!!!!

    Place the iOS device in recovery mode usning this program and then then restore via iTunes. The iPod will be erased.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    For how to restore:
    iTunes: Restoring iOS software

  • HT1430 How can I restart my iphone 4 with no sleep button and frozen apps?

    how can I restart my iphone 4 with no sleep button and frozen apps?

    So, I called support this morning, if this happens to you, call them.
    There's nothing you can do on your own at this point (without voiding a warranty.)

  • How can you reset an ipod if the lock button is broken?

    how can i reset my ipod if the lock button is broken?

    To reset the iPod without the hardware buttons,
    - Reset network settings: Settings>General>Reset>Reset Network Settings. All your wifi and bluetooth preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected. You will have to rejoin wifi networks and repair BT devices
    If you mean place in recovery mode then use on of these
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • HT5824 i can not trun off my phone because my lock button does not work

    i can no trun off my phone because my lock button does not work

    Welcome to the Apple Community Shakoya.
    Go to settings > general > accessibility > assistive touch > on. This will place a faint icon on the screen, this is then available from any screen and you can turn the phone off by tapping it, tapping device and then tapping lock screen.
    This should suffice until you can have your phone fixed.

  • My iphone lock button does not work and it randomly shut off. i need help!

    the lock button has not been working.. i was using my phone, put it down for like 30 seconds and wont turn back on!

    Are you using a case to protect the iPhone? If you are try taking it off and seeing if the button works normally then.
    If you don't have a case on the iPhone, try restarting or restoring the iPhone.
    If that doesn't take care of it, the iPhone will need service.

  • HT201401 My iphone 5 volumn down button does not work most of the time. it feels fine.  in an otterbox defender. this is my second iphone that it is doing the same thing.

    i have a iphone 5. the volume button going down only does not work.  this is my second phone with the same problem.  i have had otterboxes for both phones.

    Does not work even with the case off. I formatted and rebooted, reset, called apple and sent the last one back. It was free but this is getting old. I have had all iPhones and this is the only one I have had issues.

  • My iphone 3gs on off button does not work.  Is there another way to reset the phone?

    The on/off button on my iphone 3gs does not work.  I cannot shut the phone down to reboot and it is stuck in a no service.  I cannot get cell or internet service.  Is there another way to reboot the phone?  Possibly a soft reset?

    The screen goes to voice control.  It only recognises the home button not the on/off button.  Is there a way to soft reset the phone?

  • How can i activate my iphone 4 if previous owner does not remember the id and password

    Hi,
         I got an iphone 4 from my brother in US,phone was officially unlocked after the expiry of contract,i used it for sometime
    when my brother tried to remove it from his iclod id the phone is asking to reactivate and needs username and id of the previous owner i.e my brother but we have tried all the ids and passwords and are not working
    Please suggest a solution

    Your brother has to remember his Apple ID and password...which will be the same as the iCloud account uses.  To activate, you can also have your brother login to his iCloud account and if the iPhone is listed, send an erase signal.  That will completely erase his information and you can enter your own.

  • How can I save a jpeg? Cntrl-click on does not work as it did in version 2

    In Firefox 2 I could hold down the Control key and click on an image to open a window with a "Save as" choice. Then I could name the image and chose a location to save it to. In Firefox 3, the window opens as before but the "Save as" choice does nothing. So how can I save website images as jpegs in a specified location such as a folder on my hard drive or on a memory stick?

    Hi ddt333,
    Base on my test again, I found that if the value of relative position is less than 1, it will uses the absolute position, you could change its position to relative position with the value less than 1 (e.g. 0), after save and re-check its position, you will
    find that it still uses absolute position. By default it uses the absolute position, so when we add the new textbox to the document, its position is at left-top of document (left=0, top=0).
    The RelativeHorizontalPostion property is used to specify its
    relative to type (e.g. page, marging)
    There are LeftRelative and TopRelative properties of shape, so please specify these properties’ value, then change
    relative to type of shape.
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I sign out from CC if my PC does not work?

    Hi there, I have downloaded the CC programes on my PC Desktop and Apple MacBook. My PC stopped working and I have acquired a new Apple Desktop. Now I try to download the programs on the new Apple. I have received the message that I have to lock out from Creative Cloud on my PC Desktop. How can I lock out if I cannot start my PC? Thank you.

    Contact support by phone or web chat and they can handle iit on their end.
    Mylenium

Maybe you are looking for

  • How do I set up uTorrent 2.0 on my WRT54G2 v1.0 router?

    I use my wireless adapter to access my network and I have the latest firmware version installed and running on the router and was just wondering how to set up all the ports on the router and any other special steps I need to take for the program and

  • 6 months, Winona Minnesota, $55-60/hr

    LabVIEW/Teststand 6 months Winona, Minnesota. Phone Hire, but work is on-site.  Please don't inquire if you cannot relocate or are not authorized to work in the US.  They won't be interested.  (Really!) The best candidates are those who have done who

  • How to recover adobe dreamweaver cs6 license key?

    My computer crashed. The copy of CS6 Adobe Dreamweaver is lost. How do I recover it.? Please note: I have the same version of Dreamweaver on my laptop. Is it possible to retrieve the license key from this computer?(I cannot find the license key)

  • Does Export Version reduces image quality?

    Hi, I got smaller file size when I "export version" at "original size". My master was jpeg of 5.1MB and I exported in jpeg format, I got 3.6MB. If I "export master", I do get 5.1MB. What does Aperture do to the jpeg image that reduces the file size?

  • Upgrading from an iMac running 10.4.11 to a Macbook Pro 10.8.5

    I now find that none of my software will work (Final Cut Studio 2; CS2, et al).  Is there a way of running a second OS on this machine?