HT1430 How do you know if your ipod has been reset?

I am having trouble with my ipod touch. It is a 4th generation. When I unplug it from my computer it goes black after about 10 seconds. It will not come on until I plug it into the computer. What is going on with it? Can anyone help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

How do you tell if your iphone has been hacked?

How do you tell if you iphone has been hacked? I have an iphone 3GS and I've gotten text messages from 2 different people that i don't know, telling me they can't see the pics that I've sent them & wanting to know what the pics are of. One of the numbers had been part of a group message that I recieved from a friend. I just thought she ended up responding back to me by mistake thinking she was sending a message to the originater of the group message.Then a couple weeks later i got another text from a person I have never contacted wanting to know who I was & why I was sending multimedia messages that she couldn't open. Just trying to figure out what is going on. If I postd this on the wrong group, please let me know which one I need to post this on. Thanks.

Well that's good to know. As far as I know the phone has not been jailbroken, unless it was done before I bought it. I purchased it used from an individual who said it was restored to factory defaults.
It just concerns me that people are texting me telling me that I'm sending them pics that they can't open. I've checked my bill online & nothing shows up that shouldn't be there.

How do you know when Acrobat xI has been downloaded?

How can you tell Acrobat Xi has been downloaded?

What is your operating system? Where did you download it to? Did you also install it after downloading?

How do you know if your ipod video is insured

My screen is crack anybody know how can fix it and about how much money it would cost
Other OS

Well Apple does not fix iPods so no one really knows how much it would cost; You might want to go to an Apple store and have a Genius look at it and give you another iPod under the warranty or you can send it in for repair at this site http://depot.info.apple.com/iPod/

How do you know if your ipod charger isnt working

my ipod charges for a day and then dies once it is off the charger what do i do?

You may get answers if you post your question in the iTouch forum at http://discussions.apple.com/forum.jspa?forumID=1215

HT201328 how do you know if the phone has been unlocked?

I just went through the process of unlocking my iphone 4 and I'm trying to see if it actually happened.
Is there a way to check through the device or anything?
Thanks.

You should have received some type of notification from your carrier if it was successfully unlocked.
To test it yourself, you can try putting a SIM card from another carrier in your iPhone, but there is no setting or anything you can read.
You can also give Apple a quick call or chat and they should be able to confirm if its unlocked or not.
https://support.apple.com/kb/HE57

How do you know if your Iphone app is connecting to the internet?

I'm a brand new Iphone user and I have a question about apps. I only have the smallest data plan. I'm wondering how do you know if your app (or any app you download) once opened connects to the internet?
For instance I have a Netflix subscription. When I hit the Netflix app is that connecting to the internet? When I watch a movie or tv in my own que is that still on the internet?
Or what about the Kindle app or iBooks? Is it on the internet to read?
Those are just two small examples. I'm having a hard time figuring out which apps to download based on if they connect to the internet for their use.

As a general rule, if the app stores all of its data locally on your phone, a data connection is not needed for that app to function properly. If the app does not store data locally on your phone...streaming apps(Netflix), the built in Maps app, etc., a data connection will be required for the app to function properly. You can minimize your cellular data usage by only using such apps when connected to available WiFi. You also have the ability to turn cellular data completely off in settings: Settings>General>Network>Cellular Data>Off. Best to completely read an apps description before installing such on your phone. If a data connection is required for the app to function, it will state such in the app's description.

When setting up a new ipad how do you know what your user name is?

When setting up a new ipad how do you know what your user name is?

How to set up Apple ID
http://support.apple.com/kb/ht2731

How do you know when your MacBook is infected?

Hey All. Well my question is how do you know when your MacBook is infected with a virus? I came off windows and i have norton antivirus so i have something to tell me there. But on the Mac OS you rarely get viruses and i dont have a anitvirus program, so how do you know when you have one? And what does it do?
Thanks!

Since no ones got one that I know of it is hard to say. I figure that when the day comes that someone writes a Mac virus you will know real quick what happens. If your concerned you could use ClamXav. I use it if I download something for my wife's PC but have never found anything yet.

How do you know if your apple warranty is run out on I phone so I can buy apple care

How do you know if your apple warranty is run out on I phone so I can buy apple care

Check Your Service and Support Coverage: Apple - Support

How can you know when your Apple Pass word has expired?

How do you know when your Apple password expires?

They were wrong. Apple Passwords don't expire. Unless you choose to change it, your Apple password can stay with you forever.

How can you start up your ipod if holding the hold and home button does not work?

how can you start up your ipod if holding the hold and home button does not work?

Remi,
How long did you hold these buttons for? Did you try more than once? Have you tried letting it charge for a bit and trying again?
If nothing else, see this article for more troubleshooting assistance.
http://support.apple.com/kb/TS2771
B-rock

How do you know if your computer is running 64 Bit?

How do you know if your computer is running 64 Bit?

That's actually a kind of complicated question. Strictly speaking, there's no such thing as "running 64-bit".
That aside, Intel Core 2 Duo processors and late-model Xeons all have chips that have the Intel EM64T instructions set (64-bit extensions developed by AMD and later adopted by Intel), so they are capable or executing those added 64-bit instructions.
In the Leopard OS, most of the system software has been compiled to make use of 64-bit libraries, but at the same time, 32-bit versions are included for compatibility with pre-Leopard software. So, at any given time you can have software running that uses only the 32-bit instructions, or uses the 64-bit instructions.
Now, albeit the 64-bit libraries are capable of addressing a 64-bit address space, until recently, iMacs and Mac notebooks used Intel chipsets (not the CPU, but the chips that connect the CPU to the other parts of the computer) couldn't address more than the 32-bit address space (a portion of which was reserved, which is why you couldn't use more than 3G of RAM in those Macs).
So, based on that you can ask these questions to see if you are running in 64-bits:
Is the computer a G5 Power PC, Xeon, or Core 2 Duo CPU? If no, you are 32-bit, else go on...
Are you using OS X 10.5 or later? If no, you are 32-bit, else go on...
Does the application "require OS X 10.5 or later" or does it advertise that it's a "64-bit" application? If no, the application is probably 32-bit.
On OS X 10.5 and later, most of the pre-installed Apple-branded software uses the 64-bit versions of the libraries, so they can be said to be "64-bit".

How do I know if the program has been downloaded to another computer or not?

How do I know if the program has been downloaded to another computer or not? Also how do I know if it is the educational version or not?

What exactly? Your questions don't make much sense since you failed to provide an explanation what problem you actually have, what program you actually mean and so on. That aside, edu versions are technically not different from the normal programs, just their licensing is different.
Myleniumu

Hi, for Iphone tips page "see when a message was sent " , then how do I know that the message has been read?

Hi,
for Iphone tips page "see when a message was sent " , then how do I know that the message has been read? Thanks

Hi Bhavesh,
Please see my replies inline:
> 1. If i remember your ealier thread correct also, I
> would suggest that you drill down in Where Did the
> Error Occur. Instead of no restriction, select
> Adapter Engine and also your Corresponding Adapter
> and then trigger the error message and check if the
> alert is triggered.
When I click on "Where did the error occur" -> "Adapter Engine", I do not have a choice of errors from the dropdown. I only see one option "*".
Is this right?
> 2. ><i>When I click on "Alert Inbox" ->
> "Subscription", I get a message "The table does not
> contain any entries". Is this correct?</i>
>
> Yes this is correct. You have defined in your alerts
> as the option as FIED RECIPIENTS. You also have
> options like Reciepients via User Role and
> Subscription Authorization in ALRTCADTDEF.
>
I see.
I've also managed to overcome this problem by selecting "Subscription Authorization" in the Alert Category Definition page, and entering SAP_XI_MONITOR as one of the roles.
After that, I am able to see a the alert category defined. By default it's already subscribed, because I'm using the same user - PISUPER.
I saw in another post that the option "Suppress Multiple Alerts of this Rule" should be left unchecked. I tried that, but I still do not see any alerts raised in ALRTDISP.
What did I miss?
Please help.
Thanks.
Ron

HT1430 How do you know if your ipod has been reset?

Similar Messages

Maybe you are looking for