HT1430 how i restart iphone 5s which get off during ios update?

ow i restart iphone 5s which get off during ios update?

Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. See http://support.apple.com/kb/HT1808 for details.
Then you can restore your phone: http://support.apple.com/kb/HT1414

Similar Messages

  • HT4865 How can I unlock iPhone 4 which goes off and on

    How can unlock my iPhone 4 which goes off and on every minute

    If it's going on and off every minute you'll have to place it in recovery mode to restore it, as explained here: http://support.apple.com/kb/ht1808.  This will erase the phone so you will have to restore to an existing backup after restoring, if you have one. 

  • Hi. I am using iphone 3gs running on ios 5.1.1. I didn't find any software update option at any place in setting.  Please tell me how can i get it or how i would be able to download and install ios update without using computer

    Hi
    I am using iphone 3gs running on ios 5.1.1
    I didn't find any software update option at any place in setting.
    Please tell me how can i get it or how i would be able to download and install ios update without using computer

    Just use the phone the way it is, forget the apps.

  • IPhone 4 crashed during ios update (5.0.1) and won't restore. anyone know how i can get my iPhone working again?

    iPhone 4 crashed during ios update (5.0.1) and won't restore. anyone know how i can get my iPhone working again?

    Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. See http://support.apple.com/kb/HT1808 for details.
    Then you can restore your phone: http://support.apple.com/kb/HT1414

  • How to restart iPhone 5 with broken power button and frozen home button?

    How to restart iPhone 5 with broken power button and frozen home button?

    hmm..just realised that waiting here for answer is like watching paint drying.. Thanks Apple!
    So best option is..
    1) backup your phone
    2) log to iCloud
    3) erese your phone
    4) pug and restore your phone from backup
    .. I'm clearly starting to dislike this company and seriously considering switching to someone else.

  • How to stop iPhone from disconnecting from wifi during standby?

    How to stop iPhone from disconnecting from wifi during standby?
    It switches back to cellular data until you unlock again

    Is there any option without a charger or switching off data? Because I run out of chargers pretty quickly :)

  • My iphone 4 is getting stuck during gaming when sim card is inserted. Call anyone help me out to solve this problem?

    My iphone 4 is getting stuck during gaming when sim card is inserted. Call anyone help me out to solve this problem?

    That doesn't make any sense to me at all, unless the games you're trying to play have some sort of online connection/capability and you're in a weak signal area, thus the games can't make the required online connection. What happens when you turn cellular data off in settings: Settings>General>Network>Cellular Data>Off.

  • Wifi lost during ios update and iphone is stuck. What should i do?

    Wifi lost during ios update and iphone is stuck. What should i do?

    where does your iphone stucked?

  • Is there any truth to the rumor that there is a virus attacking iphones in the form of an iOS update?

    Is there any truth to the rumor that there is a virus attacking iphones in the form of an IOS update?

    Absolutely not.
    There was a new piece of iOS malware discovered recently, but it, like all other known iOS malware, requires that the device be jailbroken. If your iOS device isn't jailbroken, there's no known malware capable of infecting it.

  • How to run a project which gets parameters from a batch file

    Hello all,
    I use to run a program, which gets parameters only by interactive mode, using a batch file as you can see below:
    # myprogram < batchfile.txt
    Now, I'm updating its code by SunStudioExpress IDE and I'd like to run it from the batchfile. I have noticed that the project properties window has the option run -> arguments, however this program doesn't accept arguments this way and for changing it, I'd have a hard job.
    Does someone know how to run this project and to get its parameters from batchfile?
    Regards,
    Glauber

    Ah, it appears that when you run the project, "<" is passed as one of the arguments and is not treated as input redirection.
    Sorry, it looks like it is not possible to do the redirection; and it looks like a bug to me. Could you please file it through bugs.sun.com? It shouldn't take long as the problem is evident now.

  • How to check iPhone is which network?

    if i got iPhone imie number how can i check that iphone Details & that iphone is which network.....

    This depends on the country where the phone was supplied. Assuming you have not purchased a phone from another country then I would suggest that you try a sim from a from another phone and see if it works.
    if you have a friendly mobile phone store they may have a selection of sims they could try for you

  • HT201328 How to unlock iphone before you get a new sim card?

    I read the article on unlocking the iphone 4, and got permission from the carrier to unlock it.  But the instruction assume you already have a 2nd / diferent sim card.  How do you unlock the iphone before you get a new sim card?  I.e, as in unlocking it before going overseas where you will purchase a country specific sim card? 
    Thanks,
    Bobj.

    I restored my AT&T locked iPhone without a different sim, & got the congratulations screen. So, do this:
    1. Sync your phone to create a current backup.
    2. When finished, hit the "Restore" button.
    3. When done, you should get the "Congratulations" screen.
    4. If you do, restore your phone from the backup you made when you started.
    5. Sync your content back to your phone.
    That's it. You're done.

  • HT1430 How do I change page and get back to app store homepage?

    How do I change page and get back to app store homepage?

    Reset your homepage. <br />
    http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  • Why will 1 of my 2 email accounts on my iphone4 not push? Sometimes I have to restart the phone to get the emails to update.

    I have 2 email accounts. One account pushes correctly, the other does not. For the second account sometimes I have to restart the phone to get the emails. Both accounts are set to push.

    Go into the email setting and click on advance and make sure it is on fetch not manual, let me know if this works.
    Click on setting
    Click mail,contacts, caendars
    Click fetch new data
    Scroll to advnace
    Set to fetch

  • How to repair an item which has damaged during transit?

    Hi All, Good Day !
    I have a situation where an item (material) which has damaged during transit (from one plant to another plant), needs to be repaired in house (by plant maintenance)
    Incidentally, this item (material) belongs to the inventory and does not have any equipment master created.
    Is there any way to get this item repaired within PM module and capture the costs to the material or stores?
    I know that we can get this done through PM04 order type (refurbishment order) to certain extent, but I want to avoid this process.
    Pls. suggest if any alternate process available which could capture this process.
    Thanks in advance and Best Regards
    JK

    JK,
    Sorry - didn't read you post properly...
    You could either use the Assembly field the Reference Object sub-screen of a standard order, or change the Reference Object sub-screen to one that has a material (see menu path IW32->Extras->Settings->Reference Object View and try screen O130)
    You may also need to create a PM Activity Type to denote this order as a refurbishment order.
    Then process your order like any other.
    PeteA

Maybe you are looking for

  • Abap  questions

    Hi ! I wanted to ask few Abap questions : 1. How do i show a calendar on select options date field ? 2. what is the name of the function for changes currencies of field ? for example i need to change from type Usd to Euro ? 3. What is the function fo

  • Broken DC in CBS Consollidation Build space

    Hi All When i assembled the activity in CMS server assembling of components got failed.Reason was Broken DC exist in CBS Consollidation build space. I have compared the CBS Development build space and CBS consollidation build space one difference i f

  • Time Machine Deleting old backups after full restore

    So I'm wondering if anyone else came up with this issue: My computer crashed and so I restored my MacBook from Time machine. I've never done this before, but figured it would put everything back to how it was. It did on my hard drive, but my Time mac

  • How can I get OS X to print to LaserWriter 300L?

    Desktop G5   Mac OS X (10.4.4)   If I can get it to print OS 9 files I'd be very pleased

  • Monitoring EIGRP using EEM

    Hi, I'm trying to create an EEM script to monitor the status of some EIGRP peers on a specific interface.  The failure detection works, the problems I have are: - The applet trigger is syslog, unfortunately there are two peers on the interface, so I