HT1430 I am getting a message asking me to enter my Facebook password in the Settings. However, when I enter it, I get the message "unable to communicate with server." It's driving me crazy!

I can't connect with the Facebook server. When I tried to connect with Facebook when playing Candy Crush, I got the message to "enter password for "" in Settings. When I go to Settings, it says "There was a problem accessing your account. Please reenter the password for [my name]." Then, when I type in my password, I get the message "unable to communicate with server."
I tried deleting my Facebook account and then reinstalling it, but the problem continues. Any ideas?

Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot

Similar Messages

HELP, i am unable to get Facebook to run. I keep getting the following error: Error signing in, unable to communicate with server.

HELP, i am unable to get Facebook to run. I keep getting the following error: Error signing in, unable to communicate with server.

>tutorial on learning PE
Here are some links I've saved
Saving & Sharing http://forums.adobe.com/thread/1051093
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
-All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/
User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
Right click PDF link in the upper right corner and select to save to your hard drive
-the page also has links to help pages for previous versions

The "welcome to Thunderbird" pop-up keeps on saying "sorry were unable to communicate with our sign-up server", how do you get past the step and create a new em

I tried to turn off the firewalls to no avail and have, on multiple occasions tried to complete the setup for a Thunderbird email account and continue to get the same message, the pop up flashes in red "sorry we are unable to communicate with our sign-up server"
any ideas how you result this issue?

If it works, the sign up page will connect you to a 3rd party email account provider such as hover or gandi who will require payment. Is this really what you want to do, given that your ISP and other providers (gmail, gmx, hotmail, yahoo) will be happy to give you an account for free?
To connect an existing email address to Thunderbird, use the route '''File|New|Existing Email Account'''.

Asking for iCloud account name and password to play iTunes radio when I have done it in the past many times without this question. Will not accept my apple id and password. Will not save my changed password. Where do I start?

I have a MAC with OS X Yosemite, version 10.10.2, 8GB, 2.7 GHz, intel core i5. Until 2 days ago, I could click on iTunes radio, pick my station and listen. Then 2 days ago, I do this and system asks for my iCloud account id and password. Does not recognize apple id or password. I change the password, does not save it. Screen that lists 2 step verification asks for added security questions, I do those and still will not allow me access. What do I do and where do I start? I thought I should download the update to OS X. I did that, still no change. Please help direct me to where I need to go to fix this problem.
Yogiowl

Restoring an iPad from an iTunes-generated backup should not require an Apple ID password.
Did you encrypt the iPad backup? If so, then trying to restore will require entering the encryption password.

IPhone gets error Unable to Communicate with Server (503)

Shortly after i enter the passcode from my iPhone into my PC, the error message comes up on my iPhone.

We had some minor outtages yesterday. 503 is an error about not finding the server. Try again and let me know if it doesn't work.
Does the PC synchronize properly without any error?

I am being asked for the password for my btinternet account however when I supply it I get a message saying there is an error in the internet accounts preference pane

I am being asked for the password for my btinternet account however when I enter it I get a message saying there is an error in the internet accounts preference pane. How can I resolve this?

BT have made some changes to their email services recently (http://bt.custhelp.com/app/answers/detail/a_id/44789/) so you may be having problems because of this. I was certainly having problems, although I don't think that they were exactly the same as yours, and resolved it by creating a new account called something new. If you haven't deleted any mail from the BT webmail, when you create a new account on your Mac, it will mirror everything on webmail as it is an IMAP account. Once you are happy that the new account is working properly and that you haven't lost any messages, you can delete the old account.

When I hook my ipod up to my mac I used to get the Itunes has detected an ipod that appears to be corrupted error message. It would then sync all my song to the ipod but when I ejected it, none of the songs would be on the ipod. Now I hook it up and I get

When I hook my ipod up to my mac I used to get the Itunes has detected an ipod that appears to be corrupted error message. It would then sync all my song to the ipod but when I ejected it, none of the songs would be on the ipod. Now I hook it up and I get the Mac OS X can't repair the disk error message. Then the spinning colored pinwheel pops up and I can't use iTunes. Please HELP!!!!!!

Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.

I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
Also, is this a Oracle DB? IF so, has the following 32 bit Oracle Client components been isntalled:
Oracle Objects for OLE
Oracle Data Provider for .NET
Oracle Providers for ASP.NET

I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
If answer is yes to all of these; contact Facebook.

Music purchased on ipad wont play on computer. I get a message which says that the computer is not authorised to play the track but when I enter the password I get the message saying that the computer is already authorised. I have the opposite problem tra

Music purchased on ipad wont play on computer. I get a message which says that the computer is not authorised to play the track but when I enter the password I get the message saying that the computer is already authorised. I have the opposite problem transfering some but not all music from computer to ipad. Can anyone help?

Interesting. Maybe it is more of a DRM issue than an Apple ID ownership issue. There is actually an iTunes Support section here on the discussion boards. If you wish to continue troubleshooting, you might post your question over there and refer to this discussion thread. You can also contact someone in Apple iTunes Support.

After downloading viber application , I was asked to enter my phone number without the country code, when I enter my phone number and pressed continue, I get this error "check setting notification" I checked it and it is on,how to get my viber code ?

After downloading viber application , I was asked to enter my phone number without the country code, when I enter my phone number and pressed continue, I get this error "viber can't access push notifications. Check settings > notifications. Check internet connection and try to register again. see viber.com/notifications for more info. I have checked the notifications and it is on also I have checked the internet connection and it is active, so what shall i do now to get my viber code?

Contact Viber customer/technical support.

I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts.

I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts. The persons name is not in my contacts and I would like to delete it from popping up. Do you know how I can do this?

The Mail app on the iPad/iPhone/iPod Touch does have an option to clear previous recipients. You can learn to live with it. But if you want to get rid of it, the only way to remove these cached email addresses from the Mail application is restoring the iPhone/iPod Touch as a new phone/iPod. If you restore from backup, the cache is also restored.
This article shows you the screens you will see during the restore: http://support.apple.com/kb/HT1414

Unable to communicate with product message when installing laserjet cp1525nw printer

I have a cp1525nw wireless printer that use to work fine wirelessly. I changed my router password (linksys router) and now can't connect. I have tried changing the password back to the original password and it still will not connect. So I when back to the changed password.
I have tried resetting the printer to the default settings, removed all HP software, deleted all temp files, rebooted machine and attempted to reinstall the printer. The software loads fine, I've connected the USB cord and then get the dreaded "Unable to communicate with product" message. I have previously tried to connect by WPS and that didn't work either.
The Wireless Network Test Report shows that the Network Name Found test is Fail. The Network Summary report shows a different Network Name under the wireless Network Configuration section than my network's SSID.
What do I need to do?

Hello,
I see that you are having issues setting up the printer over the wireless network. I will certainly do my best to help you.
The password might not be recognized by the printer, if there are spaces or special characters in it.
Restore the printer defaults. Press the OK button, select Network Config, then select Restore Defaults.
Print a configuration page to make sure the SSID and the IPv4 address are cleared.
Printing a Configuration Report.
Run the printer software again and select Add a Device to setup the wireless again.
If you are having issues, then uninstall and reinstall the software to configure the wireless.
Uninstalling the Printer Software.
HP LaserJet Pro CP1525nw Color Printer Drivers.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

OfficeJet 6700 - "Unable to communicate with printer" message after install

I am on a hybrid network with Windows 7, 64-bit. Printer is hard-wired to the router (ethernet) but laptops are wireless. Installation doesn't allow for a hybrid option, just wireless or wired, so I installed as wired.
I just installed the OfficeJet 6700 - installed OK. I also updated software/firmware during the install process.
Windows' "Devices & Printers" recognizes the HP as being installed.
Printer is able to produce the network configuration page, etc. so we know the printer is functional, but when I try to print I get an "Unable to communicate with printer" message.
Windows' "Devices and Printers" troubleshooter thinks the driver is not installed, but as I mentioned, I just installed software from the CD.
UPDATE: I was able to install & print without problems on my wife's Win7, 64-bit laptop. Something about mine seems to be the issue. Also, HP Print & Scan Doctor reports that everything checks out OK, but when I try to print a test page at the end of the good doctor's diagnosis, I am still "unable to communicate with printer."

Sorry this is so long, but I tried to be through in my testing.
Followed your suggested steps.
I had previously set a static IP address, but just to be thorough, re-set it again with the same address.
I unplugged the USB cord from the laptop.
I began with the device labeled "HP OfficeJet 6700 (Copy 1)," which was set as the default printer.
After entering the IP address & clicking Next, it searched the network and returned this message:
Additional port information required
The device could not be identified.
The device is not found on the network. Be sure that:
1. The device is turned on.
The network is connected.
The device is properly configured.
The address on the previous page is correct. (re: the page where the IP address is entered)
If you are sure the address is correct, select the device type below.
I selected Standard (Generic Network Card) and clicked Next.
Summary dialog appeared and I clicked Finish.
Clicked OK/Apply.
Attempted to print. Like before, it sent the file to print queue - then nothing.
Right-clicked on the "Copy 1" device and selected Troubleshoot. Returned the message: Make printer "Fax HP OfficeJet 6700 the default printer" - even though this copy is already the default printer. (Usually when the original copy is set as the default, this copy is automatically re-named "Fax HP OfficeJet 6700.") I chose "Apply this fix."
Summary page said "Troubleshooting has completed." I closed the troubleshooter and attempted to print. I closed the Devices & Printers window so it could refresh. Re-opened Devices & Printers. Now the default printer is named "Fax HP OfficeJet 6700." The other device is grayed out and is simply named "HP OfficeJet 6700."
Attempted to print. (I'm testing w/ Notepad and .txt files)
I have 3 choices in the Notepad's printer dialog box but only 2 devices showing in the Devices & Printers window:
~ "Fax HP OfficeJet 6700" - This is the default printer in the Devices and Printers window. I clicked on Print & rec'd an error message: "Send Fax - HP Officejet 6700. There is a problem communicating with the Printer. Check your USB connection & verify that the printer is ready." Notepad's print dialog box shows status as Offline. I canceled all documents in the print queue.
~ "HP OfficeJet 6700." When I choose this printer option, Notepad's print dialog box shows status as "Paused - Offline." I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This is the printer that shows as grayed out in the Devices & Printers window. I canceled all documents in the print queue.
~ "HP OfficeJet 6700 (Copy 1)." There is no printer by this name in the Devices and Printers window even tho' it shows in Notepad's print dialog box. Notepad's print dialog box shows status as "Ready." In Devices & Printers, when I right-click on the one labeled "Fax OfficeJet 6700" (the default device) and choose "See what's printing," 2 HP devices are listed - the one labeled "Copy 1" and the one labeled "Fax." I clicked on "Print" and like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
I plugged in the USB cord again and re-ran the same series of tests.
~ "Fax HP OfficeJet 6700" - This is still the default printer in the Devices and Printers window. Notepad's print dialog box shows status as "Ready." The fax window opened, waiting me to enter the recipient's name, add a cover sheet, etc. I closed the fax window. The .txt file was in the print queue for the "Fax" device, so I canceled all documents in the print queue.
~ "HP OfficeJet 6700." When I choose this printer option, Notepad's print dialog box shows status as "Paused - Offline." I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This is grayed out in the Devices & Printers window. I canceled all documents in the print queue.
~ "HP OfficeJet 6700 (Copy 1)." Again, there is no printer by this name in the Devices and Printers window even tho' it shows in Notepad's print dialog box. This is one of 2 choices in the device labeled "Fax" - the default device. Notepad's print dialog box shows status as "Ready." I clicked on "Print" and like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
Next, I used the printer's touch screen interface and turned the wireless connection off, leaving the USB cord plugged in.
~ "Fax HP OfficeJet 6700" - Status: Ready. The fax window opened, same as before. I closed the fax window & canceled all documents in the print queue.
~ "HP OfficeJet 6700 - Status: Paused - Offline. I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This one shows as grayed out in the Devices & Printers window. I canceled all documents in the print queue.
~ "HP OfficeJet 6700 (Copy 1)" - Status: Error. I clicked Apply, then Print. Again, this is one of 2 choices in the device labeled "Fax" - the default device. Like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
Reconnected to the wireless network & verified that the IP address had not changed.
Tried again to print using "HP OfficeJet 6700 (Copy 1)" - Status: Ready. I clicked Print and again, it sent the file to print queue - then nothing. This is still listed as one of 2 choices in the device labeled "Fax" - the default device." Like before, I canceled all documents in the print queue.
Next, I right-clicked on the one labeled "Fax OfficeJet 6700" (the default device) and choose "See what's printing" and selected the device labeled "HP OfficeJet 6700 (Copy 1)." In the print queue window, when I click on "Printer, one of my options is "Set as Default Printer." As soon as I did that, the device in the Devices & Printers window was renamed as "HP OfficeJet 6700 (Copy 1)" - no longer named "Fax." I tried to print again. Once again, file was sent to the print queue but never printed.

HP Officejet Pro 8600: "Unable to Communicate with Printer" error message

I receive the error message "Unable to Communicate with Printer" regularly when I print. Sometimes it will print 3 or 4 times just fine before I get this message. Sometimes it happens my first try at printing. I then have to reboot my computer to get it to work again. My OS is Windows 7 and my printer is an HP Officejet Pro 8600. My printer is wired to my computer. I have tried re-installing the printer software but this did not help. I've had this printer for only four months. Started happening after the second month. Any suggestions?

I finally solved it. Reflecting back on previous message boards I decided to try one last time. Some posters have found the problem in the Antivirus, Firewall protections. (By the way, I had even upgraded my router with no luck).I have Norton AntiVirus provided by the cable company.1. I turned off everything in the firewall. Although this left me vulnerable for a few mintues, I needed a fast test.2. It worked! I was able to print something immediately.3. I went back into the firewall, turned everything back on but turned off an individual switch within the firewall that said to "share the printer. "4. After turning it off, I was able to print and still have the most important parts of the firewall.This ultimately met my needs.Perhaps HP could:1. Do a better job at beta testing prior to release, including various brands of firewalls. Is there even a beta test process?2. Provide a better description of the error since all indicators within the drivers say the printer is connected. There should be a message indicating that it's connected but unable to print due to firewall protections.

HT1430 I am getting a message asking me to enter my Facebook password in the Settings. However, when I enter it, I get the message "unable to communicate with server." It's driving me crazy!

Similar Messages

Maybe you are looking for