HT1430 I completly rest my phone and i am having trouble restarting it and turning it back on any suggestions ?
I have rest my phone numerous times and it turns back on and says that "your iphone cannot be activated beacause the activation server cannot ne reached. Try connecting your iphone to ITunes to activate it, or try again in a couple of minutes."
You can restore the iPhone from backup on the last computer your iPhone synced with, this will allow you to reset the passcode http://support.apple.com/kb/HT1414. If you do not have access to the last computer the phone synced with, you will have to force the phone into recovery mode & restore as a new device, all data on the phone will be erased http://support.apple.com/kb/HT1808.
Similar Messages
-
My lock button isn't working and I completely forgot that, I turned off my phone to restart it and now I cant turn it back on, Any suggestions?
You need to get the on/off button repaired.
You can try connecting the iPhone to a power source which should power the iPhone on. -
I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?
ok no problem! all i did was 1) set up the mobile hotspot on my phone. 2) turn it and wifi on on the phone. 3) connect the laptop/desktop to the hotspot network. 4) insert setup disk for the printer and begin setup. 5) complete the setup "using a usb cord to temporarilly connect the computer and printer" 6) unplug usb cable and finish set up on the laptop/desktop. 7) give it a few minutes to show up on the AirPrint menu on the phone. 8) that should be it. I unplugged the printer and plugged it back in, made sure the laptop was totally turned off AND disconnected from the network, and did everything I could to try and make it not work. The printer I have is a Canon MG3122, it doesn't have a fancy screen or even a way to input a password or anything like that, so it just strores a default network that it will connect to. in order to change networks i would have to complete setup multiple times. Since I only plan to use it with AirPrint for my mobile business....the one network is just fine! Hope this helps!
-
Hi it's me rabia and i'm apple user
I want to change my cell phone because it's having scratches on it and i also feel like its home button did't work correctly
So i want to know that can i have a new cell phone on replace of this one at any nearby of my house App store without any cost ?
But i'm not having any line yet on my phone i use it on net mostly so what is the scene can i have or can't ??
please inform me soon !Is your phone still covered by warranty? If so, go to your nearest Apple store and depending on what happened, this may or may not be covered by warranty. If it is, then you can get a replacement exactly as the phone you already have.
If out of warranty, then there is nothing you can do and you'll have to pay. -
I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud. When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play. I get a message on my phone that says " the URL you are requesting is not found on this server". I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted. I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either. Is there someway to get the videos to play on my phone again? Make the photos not as blurry as they are now and to restore the pics and videos that have been lost? I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be. Please help if you can.
I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
Need help too!! -
My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black). Apparently the phone is so old that I am unable to install Backup Assistant on it, which sucks. I have all my old contacts saved on my computer as a CSV and also another copy on a micro SD as VCF. I have tried moving the CSV from my computer to my ENV2 via both Bluetooth and USB cable, but had no luck with either of those. I also tried to pop the micro SD into the ENV2, and although I can load all my old pictures/videos/etc. from the micro SD, I do not seem to be able to restore the contacts from card. I know there has to be some way to manually transfer these files; the contacts are still on my old phone as well; but I was unable to use the transfer wizard for that because my old phonedoesn't seem to be supported by that (Pantech Jester 2)
Google a program called bitpim, that might do what you want. Never used it but it's been talked about on the forums. Other than that you might have to input them manually. Mary
-
I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!
I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!
-
Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?
Not having the problem, don't personally know anyone who is.
-
I rented a movie tonight but it completely stops 13 minutes in and goes to a green screen. My internet connection is fine, any suggestions?
Power off the router. Wait awhile. Power it back on. Wait until all the lights are lit up properly.
Restart the computer.
Start up in Safe Mode
http://support.apple.com/kb/PH11212 -
I've tried to upgrade to Snow Leopard 10.6.3. I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded. Any suggestions?
Are you booting from the retail disc to do the installation, or running it while booted from Macintosh HD?
It should work either way, but it doesn't always work when booted from Macintosh HD. The system files are supposed to be moved into place during the restart (while the HD is unmounted) making for a long restart time which sometimes causes people to think somethings wrong and abort it. Which is a bad move.
If you're booting from the retail disc it's less obvious what the problem may be; however if you've tried it from booted from the HD and it's failed, then tried booting from the disc, it will fail again because the system components are already on the HD in a disc image waiting to be moved into place.
Whichever way you were tryig, I'd try downloading OmnDiskSweeper (it's free) and using it to see if there's a large package (around 7-10 GB) lurking somewhere that may contain the installer files. If you do, you'll need to trash that before the installer will see a 'clean' system again.
It's also worth asking how much free space you have on your HD - if there's not enough for the installer to use for the temporary package or dmg, it'll fail.
Was there no warning dialogue after the unsuccessful install?
Message was edited by: noondaywitch ; link added -
My iPhone with 40 or so percent randomly shuts down with iOS 7 and 6. Often with the camera app stating the phone is out of battery. Moments later I turn it back on and the same battery life still appears. It sometimes happens over and over until I leave it alone for a while (still not charging), and then it works.
I think you might get a new phone instead of repairing it as it takes time and you said the repairing center is far from your living place
-
Suddenly, my phone isn't working, no internet, no phone, no texting, no music. Also, I tried to sync it to my mac and the syncing process won't start. I can't turn it off. Any suggestions?
Frozen or unresponsive iPhone?
-
Why am I having trouble loading apps and updates on my iPad? I have closed out all my apps and rest my iPad but still no luck. Can someone help me please?
Try a reset, press and hold both the home and power buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
-
i am having trouble sending texts and pictures. If I have imessage on, nothing goes or everything goes to family phones
On each devoce Look at
Settings > Messages > Send and receive from
Make sure these settings are correct.
Then look at MMS in the same area. Male sure MMS is turned on and check to ensure your carrier included MMS in your cellular plan. -
Hi
I have a new powerbook and want to give my girlfriend my old G4 power book, she has a new iphone 5s, and wants to create a new itunes/apple id. When i try to de authorize the G4 and sign in with her new apple ID it says bad password, how can i release the G4 from my cluster of authorized apples and make her the owner so she can download music and more importantly sync her music with her phone, she only has 3 songs on her iphone, and loaded all her CD's into the g4 but cant sync, im no dummy and this shouldnt be hard, but its driving me crazy!!!!!!
thx u so much for your time heeeellppppp.Perhaps, as we have the same music tastes, for now i should just authorize her phone to my power book just to sync music, not pics, contacts etc? I'd hate to overright her contacts etc lol????
HELP !!!I want to give my old apple to my girlfriend, SO SHE CAN PLUG IN HER NEW IPHONE, CREATE AN APPLE ID AND USE MY OLD LAPTOP TO DOWNLOAD itunes music, but im having trouble deautherizing it, and making her the OWNER, IF you get my drift, how to i mak
Maybe you are looking for
-
Hello Experts, We are having a scenario wherein our customer sends JIT and Forecast schedules which we update to already created scheduling agreements. The customer sends these details through EDI and we are using DELJIT.DELFOR01 to update the schedu
-
Where is the import option for "Start a new clip at each scene break" in iMovie 2013?
I am currently in the process of importing several mini-DV tapes via firewire into iMovie 2013. I have the most recent version of iMovie and am using a Sony Handycam to facilitate the transfer. The problem I am having is that when I hit import, iMovi
-
Is it possible to input a value in an output field in a batch input sessio?
Hi everybody A quick question I wanted to know if theres a way to put a value in an output field when doing a batch input? I think its not possible but Im not sure PLease do confirm
-
Source in External Drive NOT imported to library
Hello, I am new Mac user(7 days old) . First application i tried is iphoto. I did not want to load my mac mini with GB's of entire family collection photos so i clicked iphoto-->preferences-->Advanced tab--> UNCHECKED "Copy Items to Iphoto library".
-
Do we have a function in oracle to select not null columns at the begining
Hi, I have 8 columns. Some of them might be null. I want to display all 8 columns in my result. Not null columns will be first and null at the end. Here is a sample data : Employee table : Employee_id Emp_fname emp_lname emp_mname dept salary em