HT1430 I forget my password and the Iphone is disabled how i can recover my password

I forget my password and the Iphone is disabled how i can recover my password

LOST PASSCODE
You should be able to remove the passcode by restoring the device. Do the following:
1. Connect the device to the computer to which you normally sync;
2. Open iTunes (Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes" in http://support.apple.com/kb/ht1212 )
3. Right-click the device in the left column of  iTunes and select Back up (read this article on how to restore http://support.apple.com/kb/HT1766 )
4. When the backup is complete, select Restore
5. When finished, restore from your most recent backup
To restore read the restore section in this article http://support.apple.com/kb/HT1766
If that doesn’t work you will need to perform a factory restore to remove it.

Similar Messages

  • HT4865 i forgot my password and the iphone is disabled

    i forgot the lock code of my i phone 5.
    now iphone is disabled. how to unlock it now ?

    If you cannot remember the passcode for the Screen Lock, you will need to Restore the device...
    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • HT1212 a friend gave me her iphone but could not remember her passcode and the phone is disable.  What can i do to reset the phone

    A friend gave me her old iphone 4 but could not remember the passcode and the phone is disabled.  How can I reset the passcode?

    In HT1212,
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • Hello! i forgot my screen password and my iphone become disabled, how can i fix it?

    Please I have a very important information inside of my iPhone 4. I forgot my screen password and after my iPhone become disable. And now I can not open it at all of course. Maybe someone knows how can I fix it? Thank you . My e-mail: [email protected]

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • HT1692 My mail on iPad stopped working and if you touch it, it brings out a blank sheet and the screen is disabled. What can I do to resolve this?

    Please help, mail icon on my iPad just stopped working. It displays a blank page and disables the screen when touched. What can I do to rectify this issue. Thanks.

    Have you tried a Reset? [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank. Be patient, the device will power ON again in the normal way. It is app and data safe!]

  • I had access to some plug-ins (like Download Help and Read It Later) in my initial page, and the buttons disappeared. How do I recover them?

    Such commands are not visible in my initial page any longer. I still have the options of clicking ''show/panel/read it later'' or ''show/panel/similar sites'', but I still prefer the buttons on the initial page.

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the "Find Updates" button (in Firefox 4: right-click the extension -> "Find Updates") to do a compatibility check.
    If you haven't done that yet then create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
    * http://kb.mozillazine.org/Testing_pre-release_versions
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

  • TS2446 if you forget your passcode and your phone is disable how do you unlock it?

    I gave my old phone to my granddaughter and she lock her self because she forgot the pahsscode, how do I unlock the phone?

    If she's forgotten the passcode then you will need to connect the phone to the computer that it's normally synced to and you should then be able to reset the phone and restore/re-sync the content to it (http://support.apple.com/kb/HT1212) - you may need to put the phone into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • If iphone is disabled, how can I turn off "find my iphone" in order to reset the phone

    If the iphone is disabled, how can I turn off "find my iphone" in order to reset it?

    Go to any other device with internet access and log on to icloud.com using the Apple ID that is active on your device. Select "Find My iPhone > Devices" and select the option to erase the device.

  • My ios is upgrade to 7.0.2, but I forget my power-on password, so the iphone is disabled and I can't use it now except for emergrncy call. Please help me...

    My ios is upgrade to 7.0.2, but I forget my power-on password, so the iphone is disabled and I can't use it now except for emergrncy call. Please help me...

    I tried this way , but I forgot my e-mail address too !
    and I dont have any idea to re-active my iPhone5 ..
    sombody help me .

  • I have forgotten my password and my iphone is disabled. I have tried to resetting it but every time the time is up and i think it will work it says "can't connect to iphone because password is on" how do reset my iphone 5?

    I have forgotten my password and my iphone is disabled. I have tried resetting it but every time the time is up and I think it will work, it says "cant connect to iphone because password is on" how do i reset my iphone 5?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I forgot my iphone 4 password and the device is disabled but it doesn't let me restore it on a different computer that it is not synced with

    I forgot my iphone 4 password and the device is disabled but it doesn't let me restore it on a different computer that it is not synced with

    See: http://support.apple.com/kb/HT1212. You will have to restore the phone using iTunes and set it up as new.

  • Download ios 7, and the location function is off, I can not access because I forgot the key constraints, I can not restore the iphone because I can not find iphone app access

    download ios 7, and the location function is off, I can not access because I forgot the key constraints, I can not restore the iphone because I can not find iphone app access

    If you have a passcode to the screen lock that you've forgotten, restore the device from the computer to which the device is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    If that still doesn't work, as a last resort try DFU mode:
    http://www.iclarified.com/entry/index.php?enid=1034
    If your device is running iOS 7 and you set up Find My iPhone (iPad/iPod),  however, then it has the Activation Lock on it and you'll need to enter in your Apple ID and password to activate the device after restoring:
    http://support.apple.com/kb/HT5818
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.How can i do it?Now I live in Myanmar(Burma).Please can you help me?........

    I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.How can i do it?Now I live in Myanmar(Burma).Please can you help me?........
    <Personal Information Edited by Host>

    RichardRicardo wrote:
    I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.
    Sorry... But...  The Apple ID and Password that was Originally used to Activate the iDevice is required.
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    You need to return the Device for a refund, as you will not be able to re-activate it.
    There is No Workaroud for Activation Lock.

  • My computer can't detect iPhone and the iPhone is malfunctioned

    i have iPhone 3G ver 3.1.3
    after i install a software (i forget the name), the iPhone is malfunctioned.
    my computer can't detect the iPhone.
    i try to reject it over and over.
    but my computer still can't detect it.
    and on iPhone screen, there is a picture of USB and iTunes.
    i try to restart the iPhone but nothing's change.
    please help me
    what should i do

    exoso wrote:
    i've tried all of your suggestion and all is well.
    but still my iPhone can't be detected by my computer
    the problem is, my Windows can't detect the iPhone.
    there's always a pop-up ballon that says "USB Device Not Recognized"
    and my iPhone shows a picture that i have to connect USB to iTunes.
    i tried to restart the iPhone too, but i still can't use my iPhone.
    I'm very depressed right now.
    Were are you able to *Verify iPhone Driver/Service Installation*, as mentioned in the article I linked above?
    Try restarting the Apple Mobile Device Service, as shown here: http://support.apple.com/kb/ts1567.
    Also, what security software is running on the PC? If you haven't already, try to update, reconfigure, or uninstall it while testing. This article: http://support.apple.com/kb/TS3125 provides additional tips that will help rule out security software issues.
    -Jason

  • I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

    I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

    ok no problem! all i did was 1) set up the mobile hotspot on my phone. 2)  turn it and wifi on on the phone. 3)  connect the laptop/desktop to the hotspot network. 4) insert setup disk for the printer and begin setup. 5) complete the setup "using a usb cord to temporarilly connect the computer and printer" 6) unplug usb cable and finish set up on the laptop/desktop. 7) give it a few minutes to show up on the AirPrint menu on the phone. 8) that should be it. I unplugged the printer and plugged it back in, made sure the laptop was totally turned off AND disconnected from the network, and did everything I could to try and make it not work. The printer I have is a Canon MG3122, it doesn't have a fancy screen or even a way to input a password or anything like that, so it just strores a default network that it will connect to. in order to change networks i would have to complete setup multiple times. Since I only plan to use it with AirPrint for my mobile business....the one network is just fine! Hope this helps!

Maybe you are looking for

  • Problem with unzipping

    Hi I m writing code to list and extract all the files when a directory name is passed as an argument. my code works fine if the directory contains all the zip files.it extracts all the files. the problem i m getting when a directory contains subdirec

  • W540 - 4k monitor at 60hz without dock possible?

    Hi, I am having issues using my Phillips 288p 4k monitor with my W540.  It runs at 4k resolution, but only at 30hz.  I have read a few threads on the forums which suggests it will display 4k at 60hz using the Ultra Dock, but I was wondering if there

  • ColorSync 20"  Color Problems

    I have gotten my hands on a 20" colorsync monitor to use for digital photography using OS 9.1 w/ photoshop 7.0. When I use the color calibration feature, the screen ends up with an overly blue hue. White appears as slightly blue. Is this normal with

  • I accidentally deleted my Application folder from my Finder. How can I get it back?

    I accidently deleted my Application folder from my Finder. How can I get it back?

  • Iphone 4 camera stuck

    I dropped my iPhone 4 but it is in a case which must have protected it so everything still works except the camera.  The camera app loads but either the shutter remains closed or opens but all you see is a blank screen.  In another forum, they sugges