HT1430 i have started the guided access and that time my ipod touch 3 battery gets over now i cant close my ipod or cannot restore it

i have started the guided access and that time my ipod touch 3 battery gets over now i cant close my ipod or cannot restore it

Without knowing what happens when you try to restore the iPod
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

I have just created a new playlist, at the same time I have updated the ITunes software and that of my ITouch. My problem is that today I have been trying to edit the playlist and the edit playlist is greyed out please help

I have just created a new playlist, at the same time I have updated the ITunes software and that of my ITouch. My problem is that today I have been trying to edit the playlist and the edit playlist is greyed out please help.
I have been in preferences and checked manually edit etc and still no joy. I must be missing something.
Susan

From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

Hi, I am trying to update my ipod touch 4th gen. I have downloaded the newest iTunes and each time i try to update i keep getting error 3004 i'm on firmware 5.1.1 trying to update to iOS 6. please help

Need help

Ok make sure you have iTunes 11. Then connect iPod touch to computer then iTunes should pop up automatically. After it opens on the bottom left there should be a tab where it says your name and then iPod. For example (Johns iPod) click on that then it brings all your information of the iPod including restore and updating.
Dont worry

I have started the installation process and now it is asking to choose the copy of adobe acrobat Pro to update. I do not have it on my computer anymore,therefore I can not select an Application. What do I do?

Acrobat Installation & Update Issues

You purchased and Upgrade copy of Acrobat which has this requirement instead of a Full copy of Acrobat which does not have that requirement. You need to go back to your Reseller or Adobe and explain that you purchased the incorrect version.

HT204306 My Ipad does not reboot after the last update, I tried the reset mode and that didnot work . All I get when turned on is the apple icon. Help Please?

I have and Ipad Model A1458 and serial number DMPJVX72F183 I did the last update 8.1 and since then I can not get it to work. The apple icon comes on then fades and then comes back then fades , this continues until I turn it off or the battery run died. I tried the reset but that did not work. Any suggestion?

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

I turned on guided access and forgot the password IOS 7. Ideas?

I turned on guided access and forgot the password. I haven't done an iCloud back up in a while so my options are limited running IOS 7. Ideas?

Restore iPad
http://support.apple.com/kb/ht1414
Note: Data will be lost if you do not have Backup

I am stuck in an App with Guided Access and have forgotten pass code? Help!

I have forgotten pass code for Guided Access and can not get of the App? I don't know what to do next? I have tried resetting by holding Home button and on/off for 10 seconds. What now?

Hi Suzanne
If you continue to be unable to guess the passcode by brute force attempts, you can connect the device to a computer that has synced the device and unlock things with a sync.
If you have never synced with iTunes then you can try this:
1.Hold the Lock Button
2.Slide the Slide To Power Off slider [If touch is disabled/you're unable to slide it, do a hard reset — hold the lock and home button until the Apple Logo appears]
3.When your iDevices powers up, immediately exit the app that automatically opens.
4.Go to Settings > General > Accessibility > Guided Access
5.Click Set Passcode
6.Enter new password
7.Reboot again.
8.Wait for the app to automatically open and Triple tap the home button
9.Enter the new password

I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas

I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas?

Hello tcampbell1549,
Thank you for using Apple Support Communities.
For more information, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.

First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

My iPad is stuck in guided access and triple clicking the home button is not working.... Suggestions?

My iPad is stuck in the guided access accessibility feature and the triple click home to exit is not working. I can not do anything on my iPad! Any suggestions?

Try resetting the iPad - press and hold the Poewr and Home buttons until the screen goes blank, then release them. The iPad should reboot. Go straight into the Settings app and turn off Guided Access.
~Lyssa

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." How to fix this installation error?

Does anyone know, how to fix ' This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." ?

At what point in the process are you getting this message? Have you tried downloading a fresh copy of the iTunes setup file from http://www.apple.com/itunes/download/ ?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Audit log of the User access and permissions

Hi All,
We need to have the Audit trail of the user access and permission. Meaning Changes to user access rights will be logged.
This should include:
Current Access Rights (including Date the access was given),
Group membership (including Date the access was given),
Previous Access Rights (including Date the access was given and revoked).
Can we reuse any out of the box functionality of CQ. Does anybody having any pointer to this?
Thanks,
Debasis

Hi PChamoun,
At the outset thanks a lot for the clue. I am very new to CQ. Could you please guide me like, what are the API required to track the rep:policy node changes. Even if workflow will be started after any change to rep:policy but how I will be able to get the information of what change happened.
Thanks,
Debasis

HT5030 whem installing itunes i get this message "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

HELP! I tunes wouldn't update so I tried to delete and reinstall. I keep getting a message stating the installation source for this product is not available. Verify that the source exists and that you can access it. please help!!

Help! Itunes wouldn't update so I tried to delet and reinstall. I keep getting a message: The instillation source for this product is not available. Verify that the source exists and that you can access it. I also get this message: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below. Help I have no idea what that means or how to fix it.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HT1430 i have started the guided access and that time my ipod touch 3 battery gets over now i cant close my ipod or cannot restore it

Similar Messages

Maybe you are looking for