HT1430 Ipad has no image on the screen
Ipad all of a sudden will not show anything on the screen, you can hear the sounds but see nothing??
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Similar Messages
-
The iPad has a bruised hand, the screen freezes sometimes buy it 4 months ago and I wonder if I can change the other as it has warranty and I have to keep the receipt?
Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for:
iPad model
Out-of-Warranty Service Fee
New iPad
$299
iPad 2, iPad
$249
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You can get the iPad repaired at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
My IPad has one half of the screen with vertical multi colored stripes and the other half is normal. Has anyone had this problem and if so is there a solution?
You could have a hardware issue, but try this and see if it helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
My ipad has stopped responding but the screen is still on. So i cant turn it off because i cant slide the red slider because of the screen not responding. Anysolution on this problem?
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
My iPad has red bleeding through the screen.
My iPad has red bleeding through the screen. The background is solid red behind everything on the page. What causes this?
Is there a fix for this?On a different thread, someone suggested dropping the iPad on its back onto a carpeted floor. I did this from about two feet high with no effect. Then tried from about 3.5 feet high, and VOILA the red disappeared! Many others reported same miraculous fix. Hope it works for you!
-
My ipad has red lines on the screen
My ipad has red lines running across the screen, this does not happen all the time, but seems to affect the black colour on screen, is there a solution to this please
You can try to reset your iPad:
Press and hold the Home button and the Sleep/Wake button (also known as power button) simultaneously.
Continue holding both buttons until the iPad shuts down and begins to restart, this might take up to 20 seconds.
You may stop holding the buttons when you see the Apple logo.
You completed the reset successful, you can now try if your iPad works again.
If it won't work, it means you have a hardware problem. If you have warranty, you can repair it for free, visit your local Apple Store or Premium Reseller to let them repair your phone. -
My first gen iPad has a line across the screen?
Ok, so mybrother who has Down Syndrome threw myfirst gen iPad, and now it has a thick line about 2/3 of the way down.it never goes away. How to fix it,or how much would it cost to replace?
I don't think this is going to do the trick, because the iPad hardware has probably been damaged - but did you try rebooting the iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
You can see your replacement options and cost here.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad -
what to do after i uploaded ios7, i reset and the only thing that comes up the screen is a plug and itunes? What to do? don't have a computer
Start troubleshooting your issue using the steps in this Apple article.
Best of luck. -
i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?
Cconnect it to your computer with the latest version of iTunes installed.
-
Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!
I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.
-
My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?
This shouldn't happen. Take it back since it's new.
-
My iPad has stripes running through the middle of screen, is it done?
Is my iPad finished, it has stripes running through the screen?
Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
If the stripes return, try giving it a couple of careful whacks across the back - some folks here have reported success doing this, but you try it at your own risk. -
I received a notice to update my ipad to the latest version of ios7 and when I did the ipad froze with a itune logo and an ipad connector image on the screen..i have turned it off several times but it remains frozen. anyone help with this?
Unfortunately, your iPad went into recovery mode and must be restored now. There is no getting around this. You need to use iTunes to do this as well. Read this for more instructions.
If you can't update or restore your iOS device - Apple Support -
My iPad has a fault of display screen. It must be 2 point of dead pixels
Hi~
I bought a iPad 2 weeks ago in New York for business trip and I am here in south korea.
My iPad has a fault of display screen. It must be 2 point of dead pixels.
How can i get the service? or change it? or fix it?
Unfortunately in Korea apple store they doesn't sell a iPad so I think it's is a problem. and also i couldn't make a call to apple engineer. (can only canada & US)
Help me~~ PLZ. T.T
Message was edited by: iboarder
Message was edited by: iboarderThat may not be true, Apple specifically state in the iPad warranty :
"Apple may restrict service to the country where Apple or its Authorized Distributors originally sold the hardware product."
Here is the iPad warranty :-
http://images.apple.com/legal/warranty/docs/NAiPad_Warrantyv20.pdf -
my iPad has been stuck on the apple loge for almost 10 hrs after trying to update, how can this be fixed?
You may have to restore your iPad using Recovery mode, but try a reset first. Hold down on the sleep and home buttons at the same time until the Apple logo appears on the screen. Let go of the buttons when you see the logo. This takes about 10-15 seconds.
IF the update will not complete or you see the connect to iTunes message on the screen, you have to restore your iPad.
If you can't update or restore your iOS device
Maybe you are looking for
-
HP LaserJet 2100TN... quo vadis?
I appreciate many folk are having trouble with HP printers since upgrading. I was printing fine via a Linksys broadband router on the ethernet, with an assigned IP to the HP printer. Now I can't see it. I've trawled through the forums and tried vario
-
Difference between GL and AA. Error MQ555 in ABST2
Hi, My client has put an asset in service in 2009 (fiscal year 2010) with a value of 70,000 EUR. In 2010 (fiscal year 2011) my client has retired 20,000 EUR worth of it (Transaction ABAON). This amount is not showing in the asset values and the d
-
"File Dialog" Express VI returns the wrong path when the user selects the desktop
In labview 8.0.1 with Windows XP, the File Dialog Express VI seems to return something other than the path selected by the user when configured to browse for folders (or files and folders) and the user selects the desktop. I can't determine exactly w
-
Hp psc 1350 all-in-one /wi fi enabling
I have an hp psc 1350 all-in- one printer. My desktop is a dinosaur and won't handle broadband internet. I now use an Apple iPad tablet on wi fi and don't want to purchase another printer. Is there a way to make my printer work on wi fi with my table
-
Error On Executing XMLelement Query
Hi; When i try to execute a simple SQL I am getting error. Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 Connected as HR SQL> SQL> SELECT XMLELEMENT("Emp", XMLFOREST(e.employee_id, e.last_name, e.salary)) "Emp Element" 2