HT1430 iPad will not reset

My iPad will not turn on. What should I do?

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

  • Will you please help me? ipad will not reset "network settings" or forget network!

    My ipad will not connect to WiFi although my laptop does. When I try to reset network settings the old settings reappear. It will not "forget this network". What do i need to do next?

    I don't fully understand what the System Reset does but I've found that it cures many ills.  It's easy, quick and harmless:
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.
    A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
    Also, you might wish to download the iPad-2 User Guide.  Pay special attention to page 162.  Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
    http://support.apple.com/manuals/#ipad
    Finally,  the User Guide can be downloaded at no charge via iBooks and a less   comprehensive version of the Guide is included as a Safari bookmark.

  • HT1430 ipad will not turn off

    Ipad will not power off. It says twitter would like to access to twitter accounts dont allow   allow

    Try doing a forced/hard reset - hold the home button and power button till the deivce shows an apple logo.

  • HT1430 ipad will not restore - error 4014 not found on website

    ipad will not restore - error 4014 not found on website - will not turn on for hours

    Take a look at this thread. Several solutions are offered.

  • IPad will not reset or turn off

    My iPad is stalled out. The reset button is not working and the screen will not turn off. How do I fix this problem?

    Hey yourbabs,
    These are the recommended troubleshooting steps for when your iPad appears frozen or unresponsive:
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    from:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Welcome to Apple Support Communities!
    Have a good one,
    Delgadoh

  • My iPad will not reset

    I want to completely reset my iPad 3 but still keep the same iOS (5.1.1) so I can't restore. The other option is to reset but this does not work. So I click on reset then erase all content and settings then it briefly shows the apple logo with a load bar and then this wheel comes and stays there I have to hard reset to get out of the cycle. Why is this happening please help

    Hi Kappy...
    I cant Sync my ipad on itunes,i think i mess it up somehere????
    It says
    the ipad coulnt not sync because the sync session failet to start..
    try to follow your advice and restore it and it says..
    this ipad coulnt be restore.
    the device isnt elegible for the request built?
    What can i do?
    Thanx...

  • TS4036 My ipad will not reset. I have tried pressing both buttons to reset and the apple icon appears then disappears. help please!

    Please help!! I have tried to reset my ipad. nothing is working. I tried uninstalling and reinstalling itunes. it says there is an error when trying to connect ipad with itunes.

    Try and force the iOS device into Recovery Mode:
    http://support.apple.com/kb/ht1808
    1. Turn off device
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to device
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected the device in recovery mode"
    8. Use iTune to restore device
    Note: You need to be patient and repeat the above many times to recover your device
    Here's a link that discusses recover mode:  http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm

  • IPad will not reset/restart

    iPad froze, tried hitting the home button and the sleep button, nothing works

    Hold it for at least 15 second or until you see the Apple logo. If that does not work, see if you can get it info recovery or DFU mode.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • HT1430 iphone will not reset

    my iphone keeps cutting off and now it wont reset itself or turn on any advice

    The first step is to evaluate battery seems like it could be the fault. Try to Restore iPhone Firmware with iTunes on computer. If still problem and you have Warranty or AppleCare Coverage make Genius Reservation and take iPhone to Apple for resolution. If no coverage, you can still take iPhone to Apple for Battery diagnostic testing.

  • HT1430 Ipad will not restart

    I am trying to restart my ipad. Holding down the sleep/wake button does nothing.

    I misunderstood, I though that you couldn't start it. Try pressing and holding both the sleep/wake and the home buttons for 10 to 15 seconds (ignoring the red slider if it appears), and the Apple logo should appear and the iPad reboot.

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Ipad 2 locked up when updating iOS 8.1.3 today and will not reset or even turn off

    went to update iPad 2 from iOS 8.1.2 to 8.1.3 and it froze while updating.  Then error it could not update because of problem.  But it is locked on screen with cord to iTunes and will not reset or turn off.  Can't get to screen to do reset in iTunes or anything.  help

    Please tell me that it has NEVER been jailbroke.  If it has never been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • I have an ipad 2, 16GB 3G WiFi, black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?

    I have an ipad 2, 16GB 3G WiFi, worked perfectly, but now black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore from recovery mode, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?
    I have tried multiple laptops with both units, re-installed Itunes, same error message on one of the units but ok on the other. Thinking I have a defective Ipad 2, any ideas on what to do is greatly appreciated.

    Tried Google?  iPad error 1600

  • My iPad is frozen it will not reset.

    Hi,
    My iPad is frozen and will not reset.  I just keep seeing the apple logo, it comes on bright and then grays out.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

Maybe you are looking for

  • My iTunes keep restarting by itself.

    I plugged in my iPad 2 to sync it and everything went like it should. I forgot to eject it first and just unplugged my iPad. Now iTunes keeps restarting as if the device has been plugged in agian , even though it has not. Anyone with some help?

  • Create external window in Web Dynpro Java

    Hello experts, I am new in web dypro java as well as enterprise portal. I have a problem concerning external window. I have created a button in my ivew in web dynpro java. By a click on this button, I would like to open an external window with a spec

  • Rapport is not visible in firefox 5, how do I resolve this?

    I change to firefox 5 this morning, it made me aware that google toolbar was not compatible but did not mention Trusteer Rapport. It was not working so I 'repaired' it, although it seems to be working it put up an error message about a mail package a

  • Qosmio X300-130: Problems with some drivers in windows 7 64 bit.

    I have installed normally in my laptop windows 7 64 bit version. Before I continue with my main problems I am in the forum for answers and I found this [post |http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=232906&#232906] . H

  • 802.1x port authentication and Windows Radius, possible?

    Hello, I'm just testing at the moment before implementing on our netowrk, but has anyone implemented 802.1x port authentication on there Cisco switch and used a Windows IAS server?  See out users are all all on a Windows domain and I want to authenti