HT1430 iPhone 4 unresponsive

My step sons iPhone 4 screen has gone black and completely unresponsive after starting a vehicle while the phone was plugged into factory radio usb port. Any suggestions what I can try to restore the phone?

ok.  Looked through many other problems - read manual.  Buttons still not responding. 
Have left phone alone, plugged to computer for 20 mins or so.
Held buttons to reset for 30 seconds.... Success!!!

Similar Messages

  • Lower Part of Iphone unresponsive

    ok i just got a "new" iphone from the people at the apple store the first one hade lines in the screen and went white so they gave me a new one ive had it for about a week and the bottom part of the screen became unresponsive so i updates to the new 1.1.3 and it did not help so should i drive the 45 mins to the apple and if i do are they going to replace it and a week down the road is that one going to go bad

    just keep replacing it until you get that one that is bullet proof. like mine.

  • IPhone unresponsive after upgrade attempt

    I tried doing the OS6 upgrade to my iPhone 4S this morning. It has been down all day, and now I am trying to restore my iPhone. It will say it is downloading, then I get a "network lost" alert and is dies again. My phone is unresponsive and unusable. It has been like this for the last 6 hours. HELP

    Out of Warranty replacement via Apple.
    For the iPhone 4 it is $149 US.

  • HT1430 iPhone 4s will not charge

    Just changed iPhone 4s battery.  Phone worked find on new battery that came already charged.  Now, battery will not charge and phone will not respond to sleep/reset button.  Suggested troubleshooting steps needed.

    You should check your original post. I responded to that one and you have asked the same question again. Stay with a single post and do not duplicate posts. It makes it difficult for users that are responding to you for you to try and do what they ask.
    First try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should restart. This could take up to 20 seconds if the phone has been unresponsive.
    Otherwise you can check this support document http://support.apple.com/kb/TS3281

  • Iphone unresponsive to everything

    Went to bed last night with a working Iphone4, I was actually on the iphone as I fell asleep, when I woke up I was sleeping on the phone. Now, it won't turn on, the power button/home screen button reset doesn't work, i have held that for a long long time. nothing. plugged it in to the wall for a few hours. nothing. plugged it up to itunes. nothing. totally unresponsive. any help? and it is not water damage

    Apple doesn't repair phones, they replace them.  If a hardware defect is found, Apple will EXCHANGE your phone.  With warranty it will be free, if you're out of warranty it will be $149

  • HT1430 iPhone 4s keypad the "o" and return button are not working - solutions?

    iPhone 4s keypad, the "o" and the return button are not working. Upgraded the software, now the "o" works in the verticle position only, and the return works in the horizontal position only. Help!

    Hi, VRS77. 
    Thank you for visiting Apple Support Communities. 
    I would start with closing any open applications in multitasking and restarting the device.  If unfamiliar with multitasking, I have included a screenshot on how to process an application close.  Test the results after processing these steps.
    iOS: Force an app to close
    If the issue persists, here are a couple addition troubleshooting steps I could recommend. 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Hope that helps,
    Jason H. 

  • HT1430 iphone will not reset

    my iphone keeps cutting off and now it wont reset itself or turn on any advice

    The first step is to evaluate battery seems like it could be the fault. Try to Restore iPhone Firmware with iTunes on computer. If still problem and you have Warranty or AppleCare Coverage make Genius Reservation and take iPhone to Apple for resolution. If no coverage, you can still take iPhone to Apple for Battery diagnostic testing.

  • HT1430 iPhone won't turn on or charge and only displays low battery image. Reset doesn't work. Help?

    This morning, my iPhone actually was down to 1% battery left. However, after more than 20 minutes, the battery still wasn't charging, so I followed the directions of shutting down my phone and turning it back on and then resetting it. When I powered down my phone, it wouldn't turn back on, and instead, it shows the low battery image on dispplay. I tried resetting it even longer than the usual 10 seconds, but the apple logo does not show up. I hope my battery isn't dead, but is there something I can do to fix my phone other than what I have done so far?

    You can "try" recovery mode:
    Turn your phone off, then force it into recovery mode & restore it:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    If no luck...your next step is an Apple store.

  • HT1430 iphone not recognized

    My iPhone 4S is not recognized by my computers.  I have a Macbook at home and at work, and neither computers recognize the iPhone when I connect it.  It doesn't even show up in Finder.  I've tried different USB ports and USB cables, as well as restarting both the computer and the iPhone.  Please advise.

    does it pull up under your devices at all and just isnt being recognized by itunes or is it not being recognized by your computer at all?

  • HT1430 Iphone 5 OS 6.1.1, When I turn off or restart device, this device automatic unmute. How can i config this problem?

    Iphone 5 OS 6.1.1, When I turn off or restart device, this device automatic unmute. How can i config this problem?

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • Iphone unresponsive - how can I turn it off?

    Second time now my iphone touchscreen has become completely inactive. I can't turn it off even to reboot it.
    Any suggestions?

    Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • Iphone unresponsive after ios 7.0.2 update

    Tried to update through itunes 11, w7 and iphone stuck with connect to itunes image. Itunes no longer sees phone. Really upset with Apple and IOS 7 - this is really under-developed is very bad for apple. I am now without a phone and considering other manufacturer's when I next change phones

    Try a reset/reboot of the phone (no data will be lost).
    Hold the Sleep and Home buttons at the same time until the Apple logo appears - then release both buttons.  Allow the phone to restart.

  • HT1430 Iphone 4s says disabled connect to itunes and itunes won't connect because phone locked with a passcode. I don't have the passcode to unlock the phone

    the iphone 4s is disabled - it says "connect to itunes".  When I connect to itunes, I get the message "itunes could not connect to the iphone because it is locked with a passcode.  You must enter your passcode on the iphone before it can be used with itunes"....the phone is disabled because the wrong passcode was typed in too many times and when I try to go to itunes, it won't connect the phone because the phone is locked, so how do I unlock the phone since it's disabled???

    You can restore the iPhone from backup on the last computer your iPhone synced with, this will allow you to reset the passcode http://support.apple.com/kb/HT1414. If you do not have access to the last computer the phone synced with, you will have to force the phone into recovery mode & restore as a new device, all data on the phone will be erased  http://support.apple.com/kb/HT1808.

  • HT1430 Iphone is disabled  connect to itunes, how to unlock my passcode?

    I can't open my iPhone with my new passcode. It says: iPhone is disabled connect to itunes.

    In the start of your question you said that the iPhone screen was locked with the text ‘‘iPhone is disabled connect to itunes’’. You had no way possible to even enter a code even if did have a correct code.
    You were in effect locked out.
    BUT after AndreweBens suggestion your screen did change to... SIM Locked. Insert a valid SIM with no PIN lock to activate iPhone. with a large button saying Unlock.
    After pressing Unlock i get a screen that says...
    Enter PIN 3 attempts remaining.
    So.... IF you now can remember your pin, write it in here now.
    IF you can not wremember the old code, then write anything in till it locks again.
    once locked again, you should be able to enter your PUK code and get in. but whats your PUK code and where did you keep it? this you can get from your telephone company i think.
    I hope this helps
    its a bit tricky to remember correctly what the screens say in this situation but i think i am right in saying it goas like this.
    once in you can then restore from your back up. urrrgh i think.

  • HT1430 iphone 3g crashed...wont restart

    i tried reseting my iphone 3g and now it wont restart at all
    what do i do?

    What have you tried so far?

Maybe you are looking for

  • How can i transfer music from my ipod touch to my new computer

    i just got a new computer and im wondering how to transfer my music from my ipod touch to my itunes

  • Goods Receipt for Purchas Order - WBGMCR02 IDoc

    Hello all! I am attempting to create material documents for good receipts of a finished goods purchase order using IDoc WBGMCR02 and message type MBGMCR configured by vendor in WE20 (partner profiles). I am creating test data via WE19 and I'm fairly

  • Aperture 3.1.3 renumbering bug

    This is a repeatable bug: 1) I import files into library, changing file names on the fly with sequential numbering. I use two cameras in my shoot, switching back and forth between them, so when I order by Version Name, I get all images from the first

  • Activity data collector (ADC) stopped collecting data

    We activated ADC. It ran well for a while. Then, it just stopped adding data to the log file. We are on Netweaver 7.0 (SP16). Any suggestions?

  • Convertion To type x  to char field in unicode system......

    Hi all please refer the following code .i need to assign type xstructure to single char field where data are ......... SRTFDHIGH =  xsrtfdhigh unicode system gives error to convertion DATA: BEGIN OF xsrtfdhigh,           pernr LIKE pc2b0-pernr,