HT1430 Iphone 5 OS 6.1.1, When I turn off or restart device, this device automatic unmute. How can i config this problem?
Iphone 5 OS 6.1.1, When I turn off or restart device, this device automatic unmute. How can i config this problem?
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine
Similar Messages
-
I just got my battery and iphone 4 screen fixed and when it turned off because there weren't any battery left, I tried charging it. After charging it for like thirty minutes, I pressed the home & lock button and it turned on for a moment for me to see that it was only at 1%... So basically it wasn't charging for that entire half hour. Then, I tried connecting it to my computer and nothing is popping up... so it won't turn on or charge... what do i do?
Who repaired the phone? I suggest taking it back to this repair facility. Since Apple replaces phones instead of repair, the repair facility would be the one to take care of your problem.
-
When syncing Apps on my iPhone 5 through iTunes, they are all greyed over and I cannot make any changes. How can I fix this. It never happened with my iPhone 4
Connect your device to iTunes and in the the window were all the apps are greyed out make sure the 'Sync Apps' checkbox (top left corner) is selected.
-
My iPhone 5 keeps on dying when it says I have around 15% battery left. Anything I can do sort This out?
Check this answer by Lawrence Finch in this post: Re: iPhone 5 battery dies at 5 percent
Lawrence Finch NYC Area
Re: iPhone 5 battery dies at 5 percent
19.11.2013 01:23 (in response to woo671)
There are two common causes for this issue; either the battery gauge needs recalibration, or the battery is dying. The one you can fix is to recalibrate:
When it shuts off charge for just a minute or two, then restart (hold HOME and SLEEP until an Apple logo appears). Deliberately run the battery down until the phone shuts off at 1%. If it shuts off above 1% repeat the above until you get to 1%. Then charge for 4 hours with the wall charger without using the phone. This process will recalibrate the battery gauge.
To prevent this from happening again about once a month run the battery all the way down to 1%, then continue until the phone shuts off. Apple recommends this in their battery help article, but they don't say why you should do it. The have some hokum about "keeping the electrons moving." Honestly! The iPad battery tip gives the correct reason. -
I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud
Hello adilx
The only way to get passed that and to use that iPhone is to ask the previous owner to remove it from icloud.com in the Find my iPhone section.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed.
Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device is erased and removed from the account, you can proceed with the device setup process.
Regards,
-Norm G. -
When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.
You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps -
Trying to update my software (iPhone and iPad) it says my iTunes software needs to be updated, but it is already is. I try this over and over again. I've already reinstalled iTunes and have shut down and restarted my Mac several times. How can I fix this?
This is what worked:
"In iTunes, I signed out of the store. I exited itunes and restarted it, logged back into the store (with my apple id), then I pulled down the iTunes menu in the menu bar and selected Check for updates.
At this point it said that iTunes 11.1 was available and I'm downloading now " Quoted from a fellow user.
It fixed my problem. -
I'm trying to restore my iPhone, but get an error message 'the iPhone cannot be restored, the device cannot be found. How can I resolve this?
iOS: Unable to update or restore
-
Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?
See if any of the following fix it.
Try logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and tap 'Sign Out' on the popup and then log back in.
If that doesn't fix it then try closing the iTunes store app via the phone's multitasking bar and see if it works properly when you open the app : double-click the home button to open the taskbar and then swipe or drag iTunes from there up and off the top of the screen to close it, and the click the home button to close the taskbar.
A third thing to try is a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
How can I move columns in Numbers without distorting the formula in other cells? In Excel I can cut and paste entire columns and the formula in other cells adjusts accordingly. When I do it in Numbers, the formula messes up. How can I do this?
For example: I have formulas in columns D and F that relate to columns C to CU
If I want to move one column from one position to another (say S to T), the formula loses the colums that was moved, i.e. it doesn't recognize it has moved, rather sees it as deleted... How can I do this without distorting the formula?Thanks for the feedback.
If I often urge askers to look at the available resources, it's because a large range of questions asked in the forums are already answered in these documents.
As they are PDFs, they are easy to search in.
CAUTION
Download them while they are available.
Given what is delivered with iBooks Author, I'm afraid that we will not get such easy to use documents.
Searching infos in the iBooks Author documentation available on line is awfully cumbersome and a lot of embedded links are wrongly flagged this way. In the Help files they aren't links but underlined strings.
It seems that the tool used to generate the web pages was wrongly configured.
Yvan KOENIG (VALLAURIS, France) dimanche 22 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan -
Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?
I have done a little experimenting: 1-close all open windows (I found that I had to do this step in order to keep Safari from hanging-will be explained later). 2: Remove all data in Prefs. 3: Immediately close the prefs window (no window should be open at this point) and quit Safari. Try to complete step 3 fast as possible; I have it down to a few seconds. The reason I urge you to close all windows is that Safari hangs until forced to quit upon immediately quitting after removing cookies. I think the auto page reload in Lion is the cause of these hiccups but I can't be sure about that. The hasty quit I found is crucial to success. Don't know why that is but it could prevent the data from re-populating. A quick flush, if you will. Hit me back if you need any of my suggestions clarified; a bit wordy, I know
-
When I try to transform an object my screen goes blank, how can I correct this?
When I try to transform an object my screen goes blank, how can I correct this?
Please answer all questions you have been asked and provide all pertinent details if you want help.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
i keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?
The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]]. -
I just installe Lion and when I get to the log in screen it shows the two users but when I try to select either of them nothing happens. How can I fix this so I can log in.
Can you select them with "Arrow left" or "arrow right" key on your keyboard?
-
Busy signal when trying to call out while vacationing in Puerto Rico. How can I fix this problem?
Busy signal when trying to call out while vacationing in Puerto Rico. How can I fix this problem?
Lmercer81,
Thanks for the update! Let's continue to take a closer look. What model phone do you have? Do you have any bars of signal on the device? Has this effected data or text? Are you able to receive incoming calls?
EfrainM_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
Firefox keeps crashing on start-up
Since Sunday evening (3-3-13) Firefox immediately crashes when I try to start: The windows that is opened just freezes and sometimes it doesn't even open at all (although the process is running). Curious thing is that when I remove Firefox and re-ins
-
Can iPhone be synced on 2 computers with the same iTunes account
I have a 3G and am running OS 3.0. I've only had my phone for about a month so I am still learning. But when I got my phone, it synced to my computer fine then when i did the 3.0 update that it wanted me to do, the phone froze, had to get it restored
-
Change in Moving average Price
Hi Experts, When ever MAP changes in our SAP syst . I need to trigger the changed value into non-SAP syst. I know MAP will not be registered in change logs. I am looking for MAP changes based on Date / Matnr. Any ray of li
-
I want to delete my old apple is so. Can use email for my new account.
-
Cannot find class in same directory during compilation
hi i have two file hello.java & hi.java in same directory having simple println statements. hello.java public class hello { public static void main(String[] args) { System.out.println("hello"); new hi(); }hi.java class hi { hi() { Sys