HT1430 ipod is frozen with itunes symbol on screen and picture of USB cable
My sons ipod is frozen with the itunes symbol on it and the usb' cable pictured. I can't turn it off. Ive tried resetting it and the apple symbol appears but this picture reappears.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I was updating my iPod and computer shut down and now my iPod is frozen with iTunes logo and USB symbol on front and is unresponsive. Any ideas?
Have you checked the knowledge base articles
http://support.apple.com/kb/HT1808
http://support.apple.com/kb/TS3281 -
IPod Mini frozen with charger symbol after iTunes 7 download
I have connected my iPod mini to Apple store. I have been proposed to upgrade iTunes with version 7. I have accepted to dowload this new version. No problem during the downloading, but after that, my iPod was and is still frozen with charger symbol discplayed on the screen. And I know that the battery is charged.
I have tried the 5S, reset,... No change. I am frustrated to have accepted this downloading. Does anybody have a suggestion ? ThanksI have connected my iPod mini to Apple store. I have been proposed to upgrade iTunes with version 7. I have accepted to dowload this new version. No problem during the downloading, but after that, my iPod was and is still frozen with charger symbol discplayed on the screen. And I know that the battery is charged.
I have tried the 5S, reset,... No change. I am frustrated to have accepted this downloading. Does anybody have a suggestion ? Thanks -
How can I get iPhone 4 active again. I was attempting to update to iOS 7 via iTunes, screen is frozen, unable to make or receive calls. Phone has been powered off multiple times, reconnected to desktop PC to restart or disconnect from iTunes, held power button and home key down at same time, still nothing, phone just shuts down. How can phone be unfrozen?
Try and force your iPhone into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
IPod mini frozen with Apple logo on screen
After charging the iPod several nights ago, the Apple logo has remained permanently on the screen until the battery runs down. We have tried all the combinations of resetting it, and occassionally get a flicker of a line on the screen, but the logo always comes back. The only other display is the low battery symbol when we attempt to reset it when the battery is low.
The iPod is also no longer communicating with the computer as it does not appear in iTunes. We have had a bit of trouble with it over the past 6 months, having had to deal with several other frozen episodes, but it usually comes back to life. Not this time however.
I have not attempted a full restore yet - is this likely to achieve anything or does it need service (or a good stomping on perhaps?)
thanks
Windows XPBefore you go to buy a new one, do you want to have a last try?
Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
In case you need an old versions (window only)
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2997880
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call. -
We have a 32 gb iPad, slow but sure. Just tried to do restore from cloud and now it's frozen. Shut off with power button and wake/sleep only and all I get is the apple symbol when I restart it. Stuck.
If reset doesn't work, try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
Ipod has itunes symbol on screen and charge cord but won't allow me to get on screen.
I went to restore my Ipod to original setting and after it turning off and coming back on, It shows itunes symbol and white charge cord coming up from bottom and it wont allow me to get off that screen. Even after turning off and back on. As well as it won't allow me to sync any of my music before or now. It says, no device detected or connected. Please help...
- The iPod's screen is telling you you need to connect the iPod to the computer and restore via iTunes.
- Try rebooting the computer and resetting the iPod and then restoring.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Next see if placing the iPod in DFU mode will allow a restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Ios8 failed update now iPad 2 is frozen, with iTunes icon on screen
My kid saw that the iOS 8 update was available for my iPad 2 and he proceeded to try to do the update but after a while when he checked how it was going there was only a black screen with the iTunes icon in the middle and what looks like a cord pointing to it.
At first we had tried to do the update wirelessly but after I saw that sign I assumed that the iPad wanted me to plug it to the iTunes app. I tried it in my old laptop where i had my iTunes account and the update failed to download again. I then tried it in a brand new iMac that I bought a few weeks ago and where iTunes was not previously installed but the update keeps failing every time and it gives error code number 9. It says to check for the latest version of the iMac iOS and also the latest iTunes which i have both of so I do not think that that is the problem. It also talks about security software interfering with the connection but like I said before this is a brand new iMac and I have not installed any security software yet.
Any ideas on how I can get my iPad working again? I don't care if I keep the old iOS for now but I just want it to work again.
Thanks in advanceFORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
Please help me in this regards.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT4623 update failed now frozen with apple icon on screen and loading bar underneath
Anyone know how to restart the phone in this state?
Hold down the top power button and the round button on front at the same time until it shuts off. I then had to Connect to itunes via usb. and had to do a system restore. That fixed it for me.
-
Was reading book on iPad
Pop up asked if I wanted to upgrade- probably stupidly I agreed- now iPad screen is frozen with ITunes symbol and image of charger cord on screen- tried turning it off - no help.Carolyn explained how to reset the iPad. You don't need a tool or clip to do this...just your fingers.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
I do not think that is going to work, but try it.
You are getting the connect to iTunes message and that usually means that your iPad needs to be restored. -
Ipod touch frozen on itunes screen
ipod touch frozen with itunes screen
Try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Other suggestions hee:
iPhone and iPod touch: Frozen and unresponsive -
My ipod touch was with the total black screen
mine ipod touch was with the total black screen, and itunes does not recognize it you not binding
Try holding down the on/off and home buttons at the same time until you see the Apple logo.
-
My Ipod is frozen with the appel symbol on ?, My Ipod is frozen with the appel symbol on ?
My Ipod is frozen with the appel symbol on ?
I have tried the hard reset with no luck.
The problem apperd after that i started a sync from Ipod to PCWhat happens when you follow the instruction in the link I provided?
If it still shows the log, then let the battery fully drain. After charging for an hour try it again.
If the logo still shows that points to a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My iPad is frozen with iTunes logo, arrow pointing to it, lock symbol and image of bar running to power inlet point. How do I get out of this?
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Maybe you are looking for
-
Hello, I have a Canon MG5150 connected to my Mid 2010 27" I5 iMac with 16 GB ram (running OS X 10.7.4, Italian language with all updates applied). The printer works just fine, but I'm not able to use the scanner... Trying to scan using "Image Capture
-
Hi Experts, We need to integrate third party PLM with SAP ERP for the following scenarios : Load part, part changes, BOM and BOM changes, AVL and AVL changes Could you please let me know if there is any standard content available
-
Hi, I'm quite new to Oracle PL/SQL and I'm using Oracle SQL Developer to write some queries. I am often asked to run a query for a list of values and output each set of results individually. For example: Select Count(*) from ORDERS where ZIPCODE='XXX
-
Fi consultant role in Fi-MM integration
hi sap gurus, can anybody help me '<b>what is the role of a Fi Consultant in the fi - mm integration</b>' phase. points will be awarded. regards, vicky.
-
My player is able to play other peoples files perfectly, but when I post a music file on the web I get this error pop-up message. "The plug-in was found, but an error in the plug-in has occurred"