HT1430 My inbox is update is taking too much time?
My inbox is not getting updated? I see the sign "checking e-mail" displayed for more than an hour and still the inbox does not get updated. Also when I send a message, I do not see it in the Sent box.
Assuming that you are connected to network okay then the best thing to do is to delete your email account and re-enter it. I know that it sounds strange but this does sometime help. Good luck and do report back.
Similar Messages
-
Update SQL taking too much time.. hw to optimised?
Hi,
here is the query; this is taking time more than 3hrs to execute.
UPDATE process_sub_step proc1
SET process_indicator = '0',
process_result = 'SC'
WHERE EXISTS (SELECT *
FROM link_trans link1
WHERE link1.tr_leu_id = proc1.tr_leu_id AND link1.TYPE = 'S')
AND process_substep_id = 'TR_02_03'
AND process_indicator = '2'
The above query is taking more than 3hrs to execuite ...!!!!!!!
Record count in the both table is more than 10L.
The column used in join condition has index.
Execution Plan is : -
UPDATE STATEMENT ALL_ROWSCost: 6
5 UPDATE PROCESS_SUB_STEP
4 NESTED LOOPS SEMI Cost: 6 Bytes: 23 Cardinality: 1
1 INDEX RANGE SCAN INDEX PROC_SSTL_COMB_IDX Cost: 3 Bytes: 16 Cardinality: 1
3 TABLE ACCESS BY INDEX ROWID TABLE EGR.LINK_TRANS_CONS Cost: 2 Bytes: 378 Cardinality: 54
2 INDEX RANGE SCAN INDEX LTC_TYPE_IDX Cost: 1 Cardinality: 2
What approach should I take to improve the performance......!!!!
But same query if i write in select mode like below; it display result very quick -
select *
from
process_sub_step proc1
WHERE EXISTS (SELECT *
FROM link_trans link1
WHERE link1.tr_leu_id = proc1.tr_leu_id AND link1.TYPE = 'S')
AND process_substep_id = 'TR_02_03'
AND process_indicator = '2';
Thanks...> here is the query; this is taking time more than 3hrs to execute.
Obviously. For every single row in the process_sub_step matching the filter criteria, a sub-select has to be executed on the link_trans table.
So if that filter criteria identified a million rows, a million exist SELECTs have to be executed. Even a unique index scan will take accumulate into a large overhead. In your case, it is an index range scan that is performed which is slower than a unique scan.
Btw, there is no joining done here - just a nested loop process. I.e. read a row at a time from process_sub_step using a loop, and in each loop iteration, run a SELECT against link_trans.
To optimise this specific SQL means having to do less I/O (process less rows):
a) selecting less rows from process_sub_step to delete
b) making the select filter on link_trans more restrictive
Neither is likely practical. Which means you need to approach this problem with another method and not an EXIST sub-select. -
Update statement taking too much time
Hi All,
I defined a cursor in which there are almost 94 lakh records and i want to update few fields of a table from another table which takes data over a dblink.
my cursor is
cursor c_tpo is
select t.loc_loc_id,
t.till_no,
t.transaction_date,
t.sales_audit_txn_no,
t.third_party_order_ref
from dwt_om_email_addresses t
where (t.merc_loaded_date_time is null or t.ws_ordered_date_time is null or
t.copos_ordered_date_time is null)
-- And for loop is
for i in c_tpo loop
select count(*)
into ln_count
from web_sales@nrstp
where dmw_order = i.third_party_order_ref;
if ln_count = 1 then
select date_loaded, order_date, order_date, pkt_ctrl_nbr
into ld_merc_load_date,
ld_ws_order_date,
ld_cop_order_date,
lc_pkt_ctrl_nbr
from web_sales@nrstp
where dmw_order = i.third_party_order_ref;
update dwt_om_email_addresses t
set merc_loaded_date_time = ld_merc_load_date,
ws_ordered_date_time = ld_ws_order_date,
copos_ordered_date_time = ld_cop_order_date
where t.loc_loc_id = i.loc_loc_id
and t.till_no = i.till_no
and t.transaction_date = i.transaction_date
and t.sales_audit_txn_no = i.sales_audit_txn_no;
end if;
ln_count := 0;
ln_count_pkt := 0;
ld_merc_load_date := null;
ld_ws_order_date := null;
ld_cop_order_date := null;
ld_pkms_date_time := null;
lc_pkt_ctrl_nbr := null;
end loop;
-----------The ln_count is used to avoid the exception no_data_found and too_many_rows. How do I speed up the process as it takes 1 hr to update 500 records.
What would be the best approach to achieve this in less time.
Thanksif you check the your condition some where you have metioned
dmw_order = t.third_party_order_ref
if both of these are unique keys or primary key then there is no problem
but if for there are multiple values edit the query by using
rownum <= 1
update dwt_om_email_addresses t
set (merc_loaded_date_time,ws_ordered_date_time,copos_ordered_date_time) =(select date_loaded, order_date, order_date, pkt_ctrl_nbr from( select date_loaded, order_date, order_date, pkt_ctrl_nbr
from web_sales@nrstp
where dmw_order = t.third_party_order_ref)
where rownum<=1)
where exists (select '1'
from web_sales@nrstp i
where t.loc_loc_id = i.loc_loc_id
and t.till_no = i.till_no
and t.transaction_date = i.transaction_date
and t.sales_audit_txn_no = i.sales_audit_txn_no
and (t.merc_loaded_date_time is null or t.ws_ordered_date_time is null or
t.copos_ordered_date_time is null));and for exists clause there is no problem
Edited by: 810345 on Jun 10, 2011 4:07 PM
Edited by: 810345 on Jun 10, 2011 4:08 PM -
Auto Invoice Program taking too much time : problem with update sql
Hi ,
Oracle db version 11.2.0.3
Oracle EBS version : 12.1.3
Though we have a SEV-1 SR with oracle we have not been able to find much success.
We have an auto invoice program which runs many times in the day and its taking too much time since the begining . On troubleshooting we have found one query to be taking too much of the time and seek suggestion on how to tune it. I am attaching the explain plan for the for same. Its an update query. Please guide.
Plan
UPDATE STATEMENT ALL_ROWSCost: 0 Bytes: 124 Cardinality: 1
50 UPDATE AR.RA_CUST_TRX_LINE_GL_DIST_ALL
27 FILTER
26 HASH JOIN Cost: 8,937,633 Bytes: 4,261,258,760 Cardinality: 34,364,990
24 VIEW VIEW SYS.VW_NSO_1 Cost: 8,618,413 Bytes: 446,744,870 Cardinality: 34,364,990
23 SORT UNIQUE Cost: 8,618,413 Bytes: 4,042,339,978 Cardinality: 34,364,990
22 UNION-ALL
9 FILTER
8 SORT GROUP BY Cost: 5,643,052 Bytes: 3,164,892,625 Cardinality: 25,319,141
7 HASH JOIN Cost: 1,640,602 Bytes: 32,460,436,875 Cardinality: 259,683,495
1 TABLE ACCESS FULL TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 154,993 Bytes: 402,499,500 Cardinality: 20,124,975
6 HASH JOIN Cost: 853,567 Bytes: 22,544,143,440 Cardinality: 214,706,128
4 HASH JOIN Cost: 536,708 Bytes: 2,357,000,550 Cardinality: 29,835,450
2 TABLE ACCESS FULL TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 153,008 Bytes: 1,163,582,550 Cardinality: 29,835,450
3 TABLE ACCESS FULL TABLE AR.RA_CUSTOMER_TRX_LINES_ALL Cost: 307,314 Bytes: 1,193,526,000 Cardinality: 29,838,150
5 TABLE ACCESS FULL TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 132,951 Bytes: 3,123,197,116 Cardinality: 120,122,966
21 FILTER
20 SORT GROUP BY Cost: 2,975,360 Bytes: 877,447,353 Cardinality: 9,045,849
19 HASH JOIN Cost: 998,323 Bytes: 17,548,946,769 Cardinality: 180,916,977
13 VIEW VIEW AR.index$_join$_027 Cost: 108,438 Bytes: 867,771,256 Cardinality: 78,888,296
12 HASH JOIN
10 INDEX RANGE SCAN INDEX AR.RA_CUSTOMER_TRX_N15 Cost: 58,206 Bytes: 867,771,256 Cardinality: 78,888,296
11 INDEX FAST FULL SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 62,322 Bytes: 867,771,256 Cardinality: 78,888,296
18 HASH JOIN Cost: 748,497 Bytes: 3,281,713,302 Cardinality: 38,159,457
14 TABLE ACCESS FULL TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 154,993 Bytes: 402,499,500 Cardinality: 20,124,975
17 HASH JOIN Cost: 519,713 Bytes: 1,969,317,900 Cardinality: 29,838,150
15 TABLE ACCESS FULL TABLE AR.RA_CUSTOMER_TRX_LINES_ALL Cost: 302,822 Bytes: 716,115,600 Cardinality: 29,838,150
16 TABLE ACCESS FULL TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 149,847 Bytes: 1,253,202,300 Cardinality: 29,838,150
25 TABLE ACCESS FULL TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 157,552 Bytes: 5,158,998,615 Cardinality: 46,477,465
41 SORT GROUP BY Bytes: 75 Cardinality: 1
40 FILTER
39 MERGE JOIN CARTESIAN Cost: 11 Bytes: 75 Cardinality: 1
35 NESTED LOOPS Cost: 8 Bytes: 50 Cardinality: 1
32 NESTED LOOPS Cost: 5 Bytes: 30 Cardinality: 1
29 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_LINES_ALL Cost: 3 Bytes: 22 Cardinality: 1
28 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_LINES_U1 Cost: 2 Cardinality: 1
31 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 2 Bytes: 133,114,520 Cardinality: 16,639,315
30 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
34 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 3 Bytes: 20 Cardinality: 1
33 INDEX RANGE SCAN INDEX AR.RA_CUST_TRX_LINE_GL_DIST_N6 Cost: 2 Cardinality: 1
38 BUFFER SORT Cost: 9 Bytes: 25 Cardinality: 1
37 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 3 Bytes: 25 Cardinality: 1
36 INDEX RANGE SCAN INDEX AR.RA_CUST_TRX_LINE_GL_DIST_N1 Cost: 2 Cardinality: 1
49 SORT GROUP BY Bytes: 48 Cardinality: 1
48 FILTER
47 NESTED LOOPS
45 NESTED LOOPS Cost: 7 Bytes: 48 Cardinality: 1
43 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 4 Bytes: 20 Cardinality: 1
42 INDEX RANGE SCAN INDEX AR.RA_CUST_TRX_LINE_GL_DIST_N6 Cost: 3 Cardinality: 1
44 INDEX RANGE SCAN INDEX AR.RA_CUST_TRX_LINE_GL_DIST_N1 Cost: 2 Cardinality: 1
46 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 3 Bytes: 28 Cardinality: 1
As per oracle , they had suggested multiple patches but that has not been helpful. Please suggest how do i tune this query. I dont have much clue of query tuning.
RegardsHi Paul, My bad. I am sorry I missed it.
Query as below :
UPDATE RA_CUST_TRX_LINE_GL_DIST LGD SET (AMOUNT, ACCTD_AMOUNT) = (SELECT /*+ index(rec1 RA_CUST_TRX_LINE_GL_DIST_N6) ordered */ NVL(LGD.AMOUNT, 0) - ( SUM(LGD2.AMOUNT) - ( DECODE(LGD.GL_DATE, REC1.GL_DATE, 1, 0) * CTL.EXTENDED_AMOUNT ) ), NVL(LGD.ACCTD_AMOUNT, 0) - ( SUM(LGD2.ACCTD_AMOUNT) - ( DECODE(LGD.GL_DATE, REC1.GL_DATE, 1, 0) * DECODE(:B2 , NULL, ROUND( CTL.EXTENDED_AMOUNT * NVL(CT.EXCHANGE_RATE,1), :B3 ), ROUND( ( CTL.EXTENDED_AMOUNT * NVL(CT.EXCHANGE_RATE,1) ) / :B2 ) * :B2 ) ) ) FROM RA_CUSTOMER_TRX_LINES CTL, RA_CUSTOMER_TRX CT, RA_CUST_TRX_LINE_GL_DIST LGD2, RA_CUST_TRX_LINE_GL_DIST REC1 WHERE CTL.CUSTOMER_TRX_LINE_ID = LGD2.CUSTOMER_TRX_LINE_ID AND CTL.CUSTOMER_TRX_ID = CT.CUSTOMER_TRX_ID AND LGD.CUSTOMER_TRX_LINE_ID = CTL.CUSTOMER_TRX_LINE_ID AND LGD2.ACCOUNT_SET_FLAG = 'N' AND REC1.CUSTOMER_TRX_ID = CT.CUSTOMER_TRX_ID AND REC1.ACCOUNT_CLASS = 'REC' AND REC1.LATEST_REC_FLAG = 'Y' AND NVL(LGD.GL_DATE, TO_DATE( 2415021, 'J') ) = NVL(LGD2.GL_DATE, TO_DATE( 2415021, 'J') ) GROUP BY CTL.CUSTOMER_TRX_LINE_ID, REC1.GL_DATE, CTL.EXTENDED_AMOUNT, CTL.REVENUE_AMOUNT, CT.EXCHANGE_RATE ), PERCENT = (SELECT /*+ index(rec2 RA_CUST_TRX_LINE_GL_DIST_N6) */ DECODE(LGD.ACCOUNT_CLASS || LGD.ACCOUNT_SET_FLAG, 'SUSPENSEN', LGD.PERCENT, 'UNBILLN', LGD.PERCENT, 'UNEARNN', LGD.PERCENT, NVL(LGD.PERCENT, 0) - ( SUM(NVL(LGD4.PERCENT, 0)) - DECODE(REC2.GL_DATE, NVL(LGD.GL_DATE, REC2.GL_DATE), 100, 0) ) ) FROM RA_CUST_TRX_LINE_GL_DIST LGD4, RA_CUST_TRX_LINE_GL_DIST REC2 WHERE LGD.CUSTOMER_TRX_LINE_ID = LGD4.CUSTOMER_TRX_LINE_ID AND REC2.CUSTOMER_TRX_ID = LGD.CUSTOMER_TRX_ID AND REC2.CUSTOMER_TRX_ID = LGD4.CUSTOMER_TRX_ID AND REC2.ACCOUNT_CLASS = 'REC' AND REC2.LATEST_REC_FLAG = 'Y' AND LGD4.ACCOUNT_SET_FLAG = LGD.ACCOUNT_SET_FLAG AND DECODE(LGD4.ACCOUNT_SET_FLAG, 'Y', LGD4.ACCOUNT_CLASS, LGD.ACCOUNT_CLASS) = LGD.ACCOUNT_CLASS AND NVL(LGD.GL_DATE, TO_DATE( 2415021, 'J') ) = NVL(LGD4.GL_DATE, TO_DATE( 2415021, 'J') ) GROUP BY REC2.GL_DATE, LGD.GL_DATE ), LAST_UPDATED_BY = :B1 , LAST_UPDATE_DATE = SYSDATE WHERE CUST_TRX_LINE_GL_DIST_ID IN (SELECT /*+ index(rec3 RA_CUST_TRX_LINE_GL_DIST_N6) */ MIN(DECODE(LGD3.GL_POSTED_DATE, NULL, LGD3.CUST_TRX_LINE_GL_DIST_ID, NULL) ) FROM RA_CUSTOMER_TRX_LINES CTL, RA_CUSTOMER_TRX T, RA_CUST_TRX_LINE_GL_DIST LGD3, RA_CUST_TRX_LINE_GL_DIST REC3 WHERE T.REQUEST_ID = :B5 AND T.CUSTOMER_TRX_ID = CTL.CUSTOMER_TRX_ID AND (CTL.LINE_TYPE IN ( 'TAX','FREIGHT','CHARGES','SUSPENSE' ) OR (CTL.LINE_TYPE = 'LINE' AND CTL.ACCOUNTING_RULE_ID IS NULL )) AND LGD3.CUSTOMER_TRX_LINE_ID = CTL.CUSTOMER_TRX_LINE_ID AND LGD3.ACCOUNT_SET_FLAG = 'N' AND REC3.CUSTOMER_TRX_ID = T.CUSTOMER_TRX_ID AND REC3.ACCOUNT_CLASS = 'REC' AND REC3.LATEST_REC_FLAG = 'Y' AND NVL(T.PREVIOUS_CUSTOMER_TRX_ID, -1) = DECODE(:B4 , 'INV', -1, 'REGULAR_CM', T.PREVIOUS_CUSTOMER_TRX_ID, NVL(T.PREVIOUS_CUSTOMER_TRX_ID, -1) ) GROUP BY CTL.CUSTOMER_TRX_LINE_ID, LGD3.GL_DATE, REC3.GL_DATE, CTL.EXTENDED_AMOUNT, CTL.REVENUE_AMOUNT, T.EXCHANGE_RATE HAVING ( SUM(NVL(LGD3.AMOUNT, 0)) <> CTL.EXTENDED_AMOUNT * DECODE(LGD3.GL_DATE, REC3.GL_DATE, 1, 0) OR SUM(NVL(LGD3.ACCTD_AMOUNT, 0)) <> DECODE(LGD3.GL_DATE, REC3.GL_DATE, 1, 0) * DECODE(:B2 , NULL, ROUND( CTL.EXTENDED_AMOUNT * NVL(T.EXCHANGE_RATE,1), :B3 ), ROUND( ( CTL.EXTENDED_AMOUNT * NVL(T.EXCHANGE_RATE,1) ) / :B2 ) * :B2 ) ) UNION SELECT /*+ index(rec5 RA_CUST_TRX_LINE_GL_DIST_N6) INDEX (lgd5 ra_cust_trx_line_gl_dist_n6) index(ctl2 ra_customer_trx_lines_u1) */ TO_NUMBER( MIN(DECODE(LGD5.GL_POSTED_DATE||LGD5.ACCOUNT_CLASS|| LGD5.ACCOUNT_SET_FLAG, 'REVN', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'REVY', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'TAXN', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'TAXY', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'FREIGHTN', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'FREIGHTY', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'CHARGESN', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'CHARGESY', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'UNEARNY', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'UNBILLY', LGD5.CUST_TRX_LINE_GL_DIST_ID, NULL ) ) ) FROM RA_CUST_TRX_LINE_GL_DIST LGD5, RA_CUST_TRX_LINE_GL_DIST REC5, RA_CUSTOMER_TRX_LINES CTL2, RA_CUSTOMER_TRX T WHERE T.REQUEST_ID = :B5 AND T.CUSTOMER_TRX_ID = REC5.CUSTOMER_TRX_ID AND CTL2.CUSTOMER_TRX_LINE_ID = LGD5.CUSTOMER_TRX_LINE_ID AND REC5.CUSTOMER_TRX_ID = LGD5.CUSTOMER_TRX_ID AND REC5.ACCOUNT_CLASS = 'REC' AND REC5.LATEST_REC_FLAG = 'Y' AND (CTL2.LINE_TYPE IN ( 'TAX','FREIGHT','CHARGES','SUSPENSE') OR (CTL2.LINE_TYPE = 'LINE' AND (CTL2.ACCOUNTING_RULE_ID IS NULL OR LGD5.ACCOUNT_SET_FLAG = 'Y' ))) GROUP BY LGD5.CUSTOMER_TRX_LINE_ID, LGD5.GL_DATE, REC5.GL_DATE, LGD5.ACCOUNT_SET_FLAG, DECODE(LGD5.ACCOUNT_SET_FLAG, 'N', NULL, LGD5.ACCOUNT_CLASS) HAVING SUM(NVL(LGD5.PERCENT, 0)) <> DECODE( NVL(LGD5.GL_DATE, REC5.GL_DATE), REC5.GL_DATE, 100, 0) )
I understand that this could be a seeded query but my attempt is to tune it.
Regards -
Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Taking too much time and not connecting to ipad software server
taking too much time and not connecting to ipad software server and not updating.. why
because everyone is doing the same thing you are... be patient, and you will get the update... I had to grab the update over 3G (it won't let you download or install, but it got me in the door) and then switch back to wifi and download and install.
-
my time capsule is taking too much time indexing backup and then taking longer time to back up ( 207 days ) or longer !!! what shall i do ?
Try 10.7.5 supplemental update.
This update seems to have solved this problem for many.
Best. -
Load is taking too much time & going to short dump.
Hi,
We have around 1000 records to be loaded from r/3 . The load is taking too much time and it is still running.
When tried to manually update the records ,we are getting an error ' converting the rate into indirect quote: CAD/USD( ex. rate type EURX). Did any one faced this type of error.
Thanks,
APRHi,
what are you trying to do? If you wanna load exchange rates this can be done via context menu of the appropriate source system ( transfer global settings/exchange rates) -
Procedure Taking too Much Time
Hi Guys,
I have package which contains number of function and procedure which is link with Oracle 's standard report called Prodction Shortage Report , it is taking too much time and even now days it is not finsih after three days.
So I am looking for some tuning steps which I can follow for all the queries one by one, I tried touse Explain Plan what it is showing not too much difference after movement of column from one location to another etc , even I have updated the existing indexes and also created new indexes.
Thanks
Shishu PaulShishu,
Is this report part of an Oracle product such as the Enterprise Business Suite (EBS)? If so, I recommend you create a Service Request (SR) with Oracle and have them tune the report. Doing your own tuning could cause you some support problems later on.
Just my two cents...
Craig -
ODS to CUBE load taking too much time..
Hi all ,
we are loading the data from our ZODS to ZCUBE, but the data load is taking too much time , we haven't created any indexes , we alsotried by making infosource for the ODS but still tha same problem .. It is always showing 0 from 345674 records that is the records are not getting extracted from ODS .
Can anybody help me in this regards , it is a bit urgent ..
Thanks in advance.Hi,
there are a few you can check. First you should check if this job hasn't ended in a dump with ST22.
The next thing you can do, if the job doesn't end abnormaly, is to reduce the amount of records processed at the same time. Sometimes the system has trouble if the amount of records that it has to process is too large. Go to the InfoPackage -> DataS. Default Data Transfer -> Fill the maximum to 10% of de the default value. Try to run the load again.
If the job still doesn't finish then you have to check wether or not there are any ABAP routines and/or formula involved in the update rule ? Maybe they running in a loop.
regards,
Raymond Baggen
Uphantis bv -
Client import taking too much time
hi all,
i am importing a client , i it has complete copy table 19,803 of 19,803 but for last four hours its status is processing
scc3
Target Client 650
Copy Type Client Import Post-Proc
Profile SAP_CUST
Status Processing...
User SAP*
Start on 24.05.2009 / 15:08:03
Last Entry on 24.05.2009 / 15:36:25
Current Action: Post Processing
- Last Exit Program RGBCFL01
Transport Requests
- Client-Specific PRDKT00004
- Texts PRDKX00004
Statistics for this Run
- No. of Tables 19803 of 19803
- Deleted Lines 7
- Copied Lines 0
sm50
1 DIA 542 Running Yes SAPLTHFB 650 SAP*
7 BGD 4172 Running Yes 11479 RGTBGD23 650 SAP* Sequential Read D010INC
sm66
Server No. Type PID Status Reason Sem Start Error CPU Time User Report Action Table
prdsap_PRD_00 7 BTC 4172 Running Yes 11711 SAP* RGTBGD23 Sequential Read D010INC
plz guide me why it is taking too much time , while it has finished most of the things
best regard
KhanThe import is in post processing. It digs through all the documents and adapts them to the new client. Most of the tables in the application area have a "MANDT" (= client) field which needs to be changed. Depending of the size of the client this can take a huge amount of time.
You can try to improve the speed by updating the table statistics for table D010INC.
Markus -
Delta Sync taking too much time on refreshing of tables
Hi,
I am working on Smart Service Manager 3.0. I have come across a scenario where the delta sync is taking too much time.
It is required that if we update the stock quantity then the stock should be updated instantaneously.
To do this we have to refresh 4 stock tables at every sync so that the updated quantity is reflected in the device.
This is taking a lot of time (3 to 4 min) which is highly unacceptable from user perspective.
Please could anyone suggest something so that only those table get refreshed upon which the action is carried out.
For eg: CTStock table should get refreshed only If i transfer a stock and get updated accordingly
Not on any other scenario like the changing status from accept to driving or any thing other than stocks.
Thanks,
Star
Tags edited by: Michael ApplebyHi fiontan,
Thanks a lot for the response!!!
Yeah!! I kow it's a lotta code, but i thought it'd be more informative if the whole function was quoted.
I'm in fact using the PrintWriter to wrap the BufferedWriter but am not using the print() method.
Does it save any time by using the print() method??
The place where the delay is occurring is the wile loop shown below:
while(allitems.hasMoreElements()){
String aRow = "";
XDItem item = (XDItem)allitems.nextElement();
for(int i =0 ; i < props.length; i++){
String value = item.getStringValue(props);
if(value == null || value.equalsIgnoreCase("null"))
value = "";
if(i == 0)
aRow = value;
else
aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --out.flush() done: " +startTime1);
bufferWrt.write(aRow.toCharArray());
out.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
What exactly happens is that after a few loops it just seems to sleep for around 20 seconds and then again starts off and ............it goes on till the records are done.
Please do lemme know if you have any idea as to why this is happening !!!!! This bug is giving me the scare.
thanks in advance -
System Taking too much time in transaction j1i5
Hi,
While updating my RG1 Register system taking too much time (4 hours for 10 items).So how I can solve this problem?
Pleasse explain detail procedure?Dear Lalit,
It may be related to technical problem like Net work etc.. so take help of the BASIS people they may help you on that.
I hope it will help you
Regards,
Murali. -
Sites Taking too much time to open and shows error
hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful. -
Taking too much time to load application
Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/
Maybe you are looking for
-
I'm running iTunes 11.0.5.6 on Windows 8. When I try to update to iTunes 11.1.0, I receive error messages that refer to a "network resource that is unavailable" and that "the older versionof iTunes cannot be removed." What do I need to do?
-
BPEL - SOA Suite 10.1.3.1.0
How do we create a new domain in BPEL 10.1.3.1? I want to leave the default domain alone and create a new domain say, "myDevBPEL" In 10.1.2.0.x seems straight forward - login to admin console and we can create a new domain and this way, we can leave
-
I tried copying some content from various websites (open content from plian HTML pages) and tried to paste it in Quickoffice document as well as in mai application. all the text got pasted properly however the content had some graphics and pictures i
-
This is tricky to explain, but here goes: My friend shot a movie on Super8 and had it transferred to video (sd, interlaced. 29.97). Whereever he spliced the actual film together, the film jumped so the video captured this and at every cut the film fr
-
How do I use Sections in Pages for iPad?
?