HT1430 My ipad 2 safari is not responding to any address typed. Internet connection is good though.

My ipad 2 safari is not responding to any address typed. Internet connection is good though.

Hi Kayakin
You're welcome. Glad to have helped.
Mahalo (thanks) for the and Aloha from Big Island.

Similar Messages

  • Ipad safari browser not responding if page takes more than 2 minutes processing time.

    ipad safari browser not responding if page takes more than 2 minutes processing time. It looks like timeout. How I solve this problem. Actully this page using java script file to draw chart.

    ipad safari browser not responding if page takes more than 2 minutes processing time. It looks like timeout. How I solve this problem. Actully this page using java script file to draw chart.

  • My ipad screen is not responding. Any ideas?

    Hi,
    I was using my ipad fine yesterday and switched on the do not disturb when I went to sleep.
    When I woke up the screen wont do anything. It unlocks when I open my leather cover but the touch screen isnt doing anything. Its fully updated on itunes.
    Any ideas on how to fix it? I have tried switching it off but not even the slider works.
    Thanks for reading
    R

    See if this will fix it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Safari will not go to any address

    Safari will no t go to any web address, the screen stays blank

    Any error messages? Do you have any other web browsers, and do they work? What about email?

  • Safari is not responding to my Ipad 2.

    Safari is not responding to my IPad 2. Please tell me the steps to get
    this back up, and running again.
    Thank you

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My IPAD 2 is freezing on the principal internet explorer page.  It presents the google home page with a grey filter over it and does not respond to any touch or key.  All other internet dependent functions seem to be working (i.e. mail, various APPs etc.)

    My IPAD 2 is freezing on the principal internet access page.  It comes up through a light grey filter and does not respond to any touch or keys.  All other internet dependent functions seem to be working fine (mail, various APPs).  How do I "unfreeze"?
    thanks
    geoff1949

    Geoff-
    Go to Settings-Safari and Clear History and Clear Cookies and Data.
    Another thing you can try is to double-click the Home button.  A row of recent Apps will line up along the bottom of the screen.  Scroll across and find the Safari icon.  Press on it for a couple of seconds until it starts to wiggle.  A red minus sign will appear on each icon.  Press on Safari's minus sign to remove it.  This may clear its memory of the bad Google page.
    If this does not help, try resetting (rebooting) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    Fred
    Message was edited by: Fred*M.

  • My iPad screen is not responding, whats the best way to clean it and what could be the problem, its 2 days old

    my iPad screen is not responding, whats the best way to clean it and what could be the problem, its 2 days old

    Braunzoes wrote:
    my iPad screen is not responding, ...
    Try a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Braunzoes wrote:
    ... whats the best way to clean it ...
    How to Clean Apple Products
    http://support.apple.com/kb/HT3226
    Braunzoes wrote:
    ... its 2 days old
    iPad User Guide iOS 6

  • HT1414 My ipad has locked-up, it has frozen while running an app, and will not respond to any button,  what do I do?

    My ipad has locked-up, it has frozen while running an app, and will not respond to any button,  what do I do?
    It simply stays on the same screen image, and does not respond to anything.  When I plug it into itunes, there is no indication of its presence.
    The ipad's clock has also stopped.
       eek

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • HT201263 hi, my ipad screen is not responding: nothing appears. How can I restore it?

    /hi
    my ipad screen is not responding. Nothing appears. It seems to turn on but nothing appears on screen.
    maybe my niece of # years old that played with it entered too many tomes wrong passcode.
    Anyway, how can I restaure it?
    The itunes doesn't recognize my ipad since I can t enter the password.
    Please help. I am desesperated
    Thanks
    Elinor

    -reset the device will not get the passcode to go away
    you can restore by putting it in dfu you mode. plug it in to the computer pull up itunes, then hold down the home button and the power button at the same time, when you see the apple logo let go of the power but keep holding the home button in tell you get a message to restore

  • IPad touchscreen is not responding even if I did the restart procedure.

    iPad touchscreen is not responding even if I did the restart procedure.

    Hi AngusZ,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots.
    I've quoted some helpful highlights for you:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    Resolution
    Follow the appropriate steps for the symptom you're experiencing.
    If a single application is not responding or stops responding when it opens, you can force it to close
    If the device is unresponsive or certain controls aren't working as expected, try restarting
    To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
    Slide your finger across the slider to turn off the device.
    To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
    If the device remains unresponsive or does not turn on (or power on), try resetting Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
    If there is no video, verify that the device has enough charge to turn on
    If you are using an iPad, ensure that it's connected to the 10W USB Power Adapter.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Home button to attempt to wake the device.
    If the screen displays a red battery icon, let the device to continue to charge until it turns on.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode.
    I hope this information helps ....
    Have a great day!
    - Judy

  • Help? My iPad 1 will not respond. Have tried basic troubleshooting.

    My iPad original will not respond.  I have attached it to my iMac and update the software and ensured it's fully charged.  I have tried to reset it by holding both buttons for more than 10 seconds.  The screen remains black.
    Does anyone have any ideas what I can do myself? Otherwise I'll go to my local Apple Store.
    Thank you.

    You're welcome.
    If there was something you could do yourself besides what I provided, I would have provided it.

  • My ipad screen is not responding meaning i can not use it, is there somthing i can do to fix it??, my ipad screen is not responding meaning i can not use it, is there somthing i can do to fix it??

    My Ipad scree is not responding to my touch, meaning i can not open and use my Ipad2, can anyone help??

    Make Sure iOS is updated to the latest version
    Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • TS1702 Hello, we have a Mac and an ipad,the Mac is working and wifi is on and the Ipad's wifi is on too, but Ipad Safari can not open because it could not connect to the server, does any one know what have happened?

    Hello, we have a Mac and an ipad, the Mac is working and wifi is on and the ipad's wifi is on too, but Ipad Safari can not open the page because it could not connect to the server, does any one know that?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I am on Software  Mac OS X Lion 10.7.5 (11G63)and keep getting Safari is not responding?

    I am on Software  Mac OS X Lion 10.7.5 (11G63)and keep getting Safari is not responding?
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  2 GB 667 MHz DDR2 SDRAM
    Graphics  NVIDIA GeForce 8600M GT 256 MB  

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • HT201260 I have update my os x 10.7.5 but safari will not respond

    I have just had a new hard drive and updated my os x 10.7.5 but safari will not respond. The computer is exceptionally quiet and gets far hotter in the top left corner than I remember it.
    I am also trying to restore files from carbonate which freezes a lot.

    you can start debugging here: http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html
    if you're not up to that, you can try adobe support (but i'm not sure they still offer support for that version): www.adobe.com/support/chat/ivrchat.html

Maybe you are looking for

  • Adding Memory RAM to System. Wich parameters needs to be changed ?

    Hi, My SO is Win 2003 x64. I Have DEV and QAS system installed on to this server. My server had 4GB of RAM. Now has 8 GB of RAM. Wich parameters do i need to change in RZ10 to adjust this new memory ? Thanks. On this link has to many information : ht

  • Transferring video to my Mac

    I was wondering if it was possible to transfer recorded video off of my TV (I have PVR) and onto my Mac. First, is this even legal? And second what products will I need?

  • How do we get information from an MFR reader and write it into a log file?

    We are working on a project using an MFR 4100 reader with a serial port to read data from RFID tags into an Excel or text file.  So far, when we run our VI, the data from tags shows up fine on the front panel but shows up as garbage in the Excel/text

  • Issues with sleep/wake feature after 16GB RAM upgrade in my MacBook Pro. Any thoughts?

    Just installed a 16GB RAM upgrade in my MacBook Pro and now it doesn't wake up on it's own when I open the lid. I have to press the power button. It works fine with a smaller RAM upgrade. I've tried putting in just one of the 8GB modules and the slee

  • How to make a hex grid?

    I need to make a hex grid in Illustrator. There are two catches: 1) The hex grid is a particular shape: I'm looking for an easy way to put together a particular pattern of hexes. 2) There can be no duplicate lines. So I can't simply cut & paste the s