HT1430 My IPAD 3 [5.1.1 (9B206)] has a problem. - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes) - It can no longer connect to the mobile network orange except Wireless (WIFI)

My IPAD 3 [5.1.1 (9B206)] has a problem.
- It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes)
- It can no longer connect to the mobile network orange except Wireless (WIFI)

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Similar Messages

I up dated to the ios 5 and lost a few things like photos and contacts but then went to a concert and took photos when i came home i restored from last back-up got my old pictures back but lost the new ones. Is there any way i can recover the new ones?

i up dated to the ios 5 and lost a few things like photos and contacts but then went to a concert and took photos when i came home i restored from last back-up got my old pictures back but lost the new ones. Is there any way i can recover the new ones?

Please please help me, if you know how.

IPhone can no longer connect to AT&T network, just says No Service1

Ever since I returned from a trip to Canada my iPhone has been unable to connect to the AT&T network. It worked fine before I crossed re boarder into Canada last week and while in Canada it was able to connect to the Rogers network.
Since I crossed back into the United States, sometimes it will connect to the AT&T network for a few seconds (never long enough to make a call) then show no service.
To try and fix the problem I have
-shut off the iPhone
-reset the iPhone
-ejected and reinserted the SIM card
-verified my AT&T bill was paid
-reset network settings
None of that worked.
If I turn Airplane mode on and then off, it says Searching... for a while before going back to No Network.
Also, the unit is able to connect to WiFi networks with no problem.
Any suggestions for how I can get my iPhone to connect again to the AT&T network?
Thanks!
Message was edited by: The Zach

Thank for the advice. The phone is not a 3G (i probably should have mentioned that).
I brought it into the Apple Store. The genius couldn't figure out the problem, so he gave me a new one.

HT4623 I just updated my iphone 5 to the latest update: 6.1.2 After update was complete, I can no longer connect with my local network, apps no longer are transfered to my phone. I lost all of my apps and music and can't get them from my computer to my

Has anyone else had trouble with update 6.1.2 for I phone? After the update, I can't get back on my network (password is correct), ICLOUD doesn't transfer my downloads, nothing seems to work. It saved my calandar and address book, but lost all of my apps and music (except for a few songs, figure that out) and I can't get them back. Any suggestions?

I had this problem post 6.1. Not sure if it was a coincidence, but I'd just recently changed my password after being convinced I'd been hacked, due to being told I was entering my password wrongly, repeatedly by iCloud / iTunes. It turns out my iCloud account on my Settings -> Mail, Contacts and Calendars was listed as Inactive. Putting in my details, turning off Contacts over iCloud (thus deleting them) and turning them back on again, repopulated my contacts from iCloud with numbers attached to them.

Can not continue searching within a web site without going out, then getting back in.

When using the Morningstar web site, as I go from mutual fund to mutual fund the new version of Firefox will not allow me to continue. I have to get out of the Morningstar web site, then get back in to continue my search.

I am relatively new to .Mac and I am also using Aperture. I took the link to your site and it is very impressive.
The questions I have are related to your homepage.
Did you organize your own site menu with another ap. and then import it under the "Advanced" selection or did you create it in .Mac? My problem is that I don't like the options for galleries so I am posting my own via Aperture, but once you click on the link in the site menu, there is no "Back" or "Return to Homepage" option! Your site has the numbers and arrows that allow you to advance through your galleries and to the site menu, and your site menu has hyperlinks to your Aperture posted galleries instead of photo links. How did you achieve this?
Thanks
I am new to this discussion area, so if you get this post (or anyone who knows what I mean) can you also please email me a reply to
[email protected]
In frustration...
Thanks
Ryan

Powerbook G4 can no longer connect to Time Capsule network

For more than a year, my Powerbook G4 17" was able to access the internet provided wirelessly via my Time Capsule. I recently had to reconfigure the Time Capsule setup to address an unrelated issue, and now I am unable to join the wireless network at all from the Powerbook. I would guess that I inadvertantly changed something about the setup of the Time Capsule, but I can't figure out what. All other wireless devices (iMac, Apple TV, iPad) in the house are able to connect without problem, so I know that it is at least not a password issue. Eventhough I enter the correct password for the network on the G4, I only get a "connection timeout" error.
Any suggestions as to what I might try to get connected again?

I presume you are on Mountain Lion.. it does have some network issues..
Try just rebooting.. and restart everything in the correct order..
Modem.. router/TC.. USB drive.. clients.. 2min gap between each.
If you still have issues do a verify of the drive.
See A5 http://pondini.org/TM/Troubleshooting.html

Help! Firewall setting changed to default and can no longer connect

So I was attempting to open up port 8080 outbound and made a number of changes. The issue was still present so I clicked the reset to default for the firewall settings and am now stuck with a box I cannot connect to (Windows Server 2012).
Please can someone shed some light on a solution for me as I don't want to go through the pain of reinstalling everything again.
Thanks
Phil

Hi,
Are you not able to connect to Windows server 2012 R2 Datacenter (VM) ? If yes, I will move the forum thread to Virtual Machines queue for a broader support.
Could you share the Exact error message you get while trying to connect to VM ?
See How to
Set Up Endpoints to a Virtual Machine that might be helpful.
Regards,
Shirisha Paderu

I am trying to download the update to Photo Effects (Lite) v 3.0.0, for several weeks now without success. I press the update button and it goes away, then comes back again without any change. Can someone help please?

The update to Photo Effects (Lite) v 3.0.0 won't work. I've tried for several weeks without any result. I press the download button and it disappears, then reappears again. Can any one help, please?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?

hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?

Click here, buy a Mac OS X 10.6 DVD, and then run the 10.6.8 combo updater.
(90452)

I can no longer connect to the available wi fi networks with my ipad 1

For some reason I can no longer connect to the available wi-fi networks with my ipad...help

If no change after powering your iPad off and on and/or after a reset which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release, try resetting network settings on your iPad at Settings > General > Reset > Reset Network Settings. This will erase all saved wi-fi network settings from your iPad. This will require rejoining every wi-fi network your iPad has access to when returning within range of such a network.
If no change after this, try restoring your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after restoring as a new iPad, your iPad has a hardware problem.

I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G. All the settings on the iPad are correct. It just shows that it's searching for a signal. I'm in an area where my signal (pre OS8) was very good in strength. Please help!

I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G. All the settings on the iPad are correct. It just shows that it's searching for a signal. I'm in an area where my signal (pre OS8) was very good in strength. Please help!

Hello Jpahlphoto!
I'm sorry to learn about the issues mentioned in your post. Let's fix this for you OK?
Please restore your iPad and see if that does the trick. You'll find the steps here:
http://bit.ly/16hQAlr
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport

Can no longer connect iPad Mini 2 to iPhone 6 Personal Hotspot (iOS 8.1.2 on both)

I can no longer connect my iPad Mini 2 w/ iOS 8.1.2 to connect to my iPhone 6 (iOS 8.1.2, Verizon Wireless) running Personal Hotspot.The iPad displays the error "Remote Hotspot Failure - Unable to start personal hotspot "iPhone. However, my Windows 8.1 laptop connects to the iPhone just fine. The iPad connection problem occurs with or without the Windows laptop connected or even turned on.
Both the iPhone and iPad have Bluetooth and WiFi on, and the iPhone has Hotspot active. The iPad shows the iPhone Personal Hotspot on the WiFi Settings page, but throws the error each time i attempt to connect. Additionally, the iPhone shows 1 Connection on Personal Hotspot even though I have no devices connected. I have reset my network settings twice on both the iPhone and iPad.
BTW - I used to be able to connect the iPad to the Hotspot prior to updating to iOS 8.1.2 on both devices.

Forgetting the hotspot on the iPad sent me in the right direction. I now have it working correctly, and seem to have diagnosed the cause.
The cause seems to be that I had connected the iPad to the Hotspot via Bluetooth. Once I figured out how to delete that link, I was finally able to connect to the Hotspot. Here is what I had to do:
On the iPhone:
- Turn on WiFi and Bluetooth
- Turn on Personal Hotspot and change the Hotspot password (this may not have been necessary, but things are now working)
On the iPad:
Reset all network settings:
Settings -> General -> Reset (at bottom of page) -> Reset Network Settings (deletes all known networks and their passwords and restarts the iPad)
Turn on WiFi and Bluetooth (I had found that Bluetooth must be on is necessary in some other research)
DO NOT CONNECT TO THE PERSONAL HOTSPOT USING BLUETOOTH - DON'T GO THERE!
Connect to the Hotspot using WiFi
Settings ->WiFi
- Wait until you see "iPhone" under PERSONAL HOTSPOTS (or maybe CHOOSE A NETWORK)
- Select "iPhone"
- Enter the (new) password that you set on for the PERSONAL HOTSPOT on the iPhone
You should now be connected via WiFi
Bottom line: Unless you have some VERY compelling reason to connect to the Hotspot via Bluetooth, NEVER do it. WiFi speed is multiples that of Bluetooth. With WiFi using Broadband Speedtest over Verizon LTE - 2 bars/dots - I am consistently getting between 15 and 20 Mb download and 3-15 Mb upload. With Bluteooth using the same test, I was getting about 1 Mb maximum upload and download.
I hope this solves the problem for all reading this thread. And thank you ManSinha for the helpful clue.

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

Could there be a setting I need to adjust in the iPad2? When I try to turn on WiFi and enter the name of the WiFi that I have established, including the security type and the password, I get the message "Could not scan for wireless networks." Is there a setting in iCloud or other location that needs to be changed?

I set up Keychain and do not have access to the telephone I gave. Now I can no longer connect my ipad to my windows computer. I can not turn off Keychain...it is awaiting authorization from the SMS on the telephone I do not have access to.

I set up Keychain and do not have access to the telephone I gave. Now I can no longer connect my ipad to my windows computer, itunes does not automatically open when I plug in the USB. I can not turn off Keychain in my ipad since authorization is pending awaiting the code sent by SMS, which I can not get. Can someone advise how to get rid of Keychain. Should I cancel my icloud account?

I appreciate your help.
Have reset the ipad, but that changed nothing. I can not turn off Keychain, iit remains "pending approval". Probably, the only thing to do is to close my icloud account...which I hate to do since there is a lot of data saved there. But, I am unable to back the ipad up on my Windows 8 computer because itunes no longer opens when the ipad is attached.
Oh well...computers are computers and it is impossible to cover 100% of the situations.
Keychain iss not the best app for someone who lives in 3 different countries.
Thanks

I can no longer connect to my sprint mifi. any suggestions? how can I find my IP address for my ipad?

I can no longer connect to my sprint mifi, any suggestions? How can I find out my IP address?

the ip is given to the ipad by the mifi
try restarting the ipad
and or making it forget and rediscover the mifi

HT1430 My IPAD 3 [5.1.1 (9B206)] has a problem. - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes) - It can no longer connect to the mobile network orange except Wireless (WIFI)

Similar Messages

Maybe you are looking for