HT1430 my IPAD ask me to update, so I did now the only thing that shows up on the screen is an ITunes icon with a plug in?
My IPAD said to update so I did, it shut down now all that appears is Itunes logo and and arrow with a plug
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Cheers, Tom
Similar Messages
-
Hello. I'm having a problem signing onto my iPad mini. When I went to sign on yesterday the number pad to sign on moved upward and now it is out of site. Now I can't sign on the only thing that shows is the Apple logo.
Have you tried to give your iPad a reset? Hold down the sleep and home keys until you see the silver apple. Let it reboot and see if it helps.
-
Transfered my music & video library from my laptop to my PC. Syncing my ipod classic and my ipad without incident to the PC. But when I try to sync my ipod touch, the only thing that will sync is music that I have purchased on that PC. Any ideas?
where on my computer am I suppose to make the individual picture files and have them to upload on my ipod touch.... I do have a photo library on my computer, but in the photo tab in itunes for the ipod touch and there is nothing checked for syncing, cause when I do check it it always says its going to replace everything i have in my photo library on my ipod touch..... So how am i suppose to have it checked and have it NOT replace pictures on it????
Also I cannot make more photo albums into my ipod touch, it just replaces the one album every time....
I am very frustrated cause I have tried the manuals and the apple support help etc and nothing pertains to my exact issue.....
Please if u could elaberate I would appreciate it alot.....
thank u -
TS3694 My phone started an update and now the only thing that shows on the screen is the iTunes logo
I started to update my phone and now all I get on the screen is the iTunes logo........
Try to connect in recovery mode and restore, explained in this article:
iOS: Unable to update or restore -
I updated my phone with the new iOS 7.0.2 and now it won't turn on. The screen says to connect to itunes and so I have. I have gone through the recovery mode and everything but a message saying the recovery was corrupted keeps popping up. I am scared this new update crashed my phone. Please Help!
Hi there briana_webb82,
You may find the troubleshooting steps in the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?
1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print. -
I can't get start my iPad. The only thing that appears is a part of a cable pointed to iTunes. ai have reseted many times.
Make sure the battery is charged, then restore the iPad.
Help here > iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture. I cannot get it to project my school work that I need to teach my students. Help!
Hi Becki514,
Welcome to the Support Communities!
The following articles may help you with your projector issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht3382
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/ht3131
I hope this information helps ....
Have a great day!
- Judy -
My ipad 4 comes up with ipad not backed up and it won't let me do anything the only thing that is working is siri
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use your device again -
I accidently erased all content on my ipad, (which my son had set up for me) now the only thing that is on the screen is a language portal, and some language I do not understand. I cannot change anything on the screen, HELP???
Slide to unlock then follow the process until you find back from itunes or icloud.
-
Recently updated the the apple tv remote app for my iPhone4. Now can no longer turn on the apple tv "box" on/off using iPhone app as I used to do before the update. Only thing that shows on iPhone screen is music library. Home Sharing is on. Any help appreciated. Sorry if this is not exactly the right place to post this!
One clue: I have found a reliable way to solve the problem when it happens.
In my network, I have the main Airport Extreme (Gen 1) which is connected to my router, which distributes IP addresses to my internal subnet. The other two AEs (one Gen 4, one Gen 5) are set to extend the network.
When I get this problem with an AppleTV 2 that can "see" my library, but when I try to open it, it says it couldn't find the library, it seems to have to do with a change in which Airport Extreme it's talking to.
If I restart the main Airport Extreme from the Airport Utility, effectively restarting the entire wireless network, then when the network resumes, every AppleTV 2 is happy again.
Unfortuntely, the problem does seem to recur - but I'm wondering if it's because temporary interference leads an AppleTV 2 to try to connect to a different AE, and somehow that's mucking with the Home Sharing. Remember, internet access (Trailers, Store, Netflix) have no issues. Purely Home Sharing.
Adam -
I had NO problem with Home Sharing until I updated iTunes. INSTANTLY, Home Sharing quit. I have two AppleTV's, two computers running Win7 and iTunes. All have worked seamlesly until I updated iTunes last night. I have tried all of the Home Sharing trouble shooting suggestion with no luck. My network connections are good and I can stream EVERYTHING ( Netflix, Youtube, NetRadio etc ) EXCEPT I cannont connect to Home Sharing. What gives Apple Support? Where is the fix? Anyone?
Has there been any response that helped? Why hasn't someone from Apple responded with a solution? This post was created back in 2012 and I did an update on my iTunes to 12.1.1.4 and all of a sudden my Home Sharing stopped working. I even reset my settings on my Apple TV hoping that would work and no, it didnt. Does anyone have a solution?
-
so far i tried:
1. to set the windows firewall settings
2. I've reinstalled firefox
3.Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link} -
After updating my ipod touch to the 6.0 it wont work at all. It shows the apple and the flashes a page then it goes back to the apple.What should I do with it.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I dont see software update or usage in my general setting tab. help!
Settings>General>Software Update is only available in IOS 5 and above.
If you are using IOS 4, you need to connect to iTune (computer) to update software.
http://support.apple.com/kb/HT4972
Maybe you are looking for
-
Workflow Step type for Container Operation
Hi, A STEP in a given Workflow has to have an Agent? Can't I create a Step to get data from the DB into the container and that's it? I have created a container variable called "Grade" and I need to fetch the Grade of a User (WF Inititator) from a DB
-
How do I get control of my Audigy without loaging up all the old softwa
I've moved my Audigy to a new PC, but I don't want to install all the old applications (Remote, Playcentre, etc, etc). All I really want is the Creative Mixer, but you can't install that on its own from the web - you seem to have to install all the o
-
Lag with external display macbook pro 13" i5!
Hello everyone! I just bought a brand new 13" macbook pro i5, it works absolutely fantastic. There's only one thing i'm not happy about: If I connect an external monitor to it (both my sharp32" via hdmi and my 19" samsung via VGA) it starts to lag!
-
How to get Initial quantity in BOM
Hi Friends , My requirement is to display the initial quantity and changed quantity of BOM , i am getting changed quantity but i am unable to display initial quantity in my report.I have searched all the BOM tables but initial quanti
-
Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?