HT1430 my iphone 5 is not responding after the installation of ios7 ?

MY IPHONE 5 IS NOT RESPONDING AFTER INSTALLING IOS7 TODAY. NOT EVEN
ABLE TO POWER OFF.
Is there anybody to help me?

Perhaps if YOU STOP SHOUTING someone will help you.
What have you done to troubleshoot thus far?  Have you taken the steps recommended in the User Guide (restart, reset, restore from backup, restore as new)

Similar Messages

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • My facetime on iphone 4 is not working after the update to IOS7

    Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working  after The update to IOS7       Thanks xxx

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Videofunction on iphone 4 is not working after the update to IOS7

    Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
    Anyone else experiencing the same problem?
    Anyone with solutions?
    Thanks!

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Lock screen hangs after the installation of ios7 in my iphone4s

    my iphone 4s hangs several times after the instalation of ios7. needs to be restarted several times in a day. plese give solutions

    Hello RajPuth,
    Thank you for using Apple Support Communities!
    Since restarting the phone does not seem to be resolving the issue, I would next reset the phone.
    Resetting your device
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
    From: iOS: Turning off and on (restarting) and resetting
              http://support.apple.com/kb/ht1430
    If the issue persists, I would next backup the phone to iTunes and before you restore your backup, I would test the performance of the phone and make sure that its ok. When it is, restore your backup and verify that it is still performing as expected.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Take care,
    Sterling

  • HT201328 My iPhone will not unlock after the restore on iTunes.

    I request to unlock my iPhone from AT&T they send my e-mail that to plug my iPhone in to iTunes and I did the process after the restore my will not unlock.

    Check the status of unlock on-line.
    https://www.att.com/deviceunlockstatus/client/en_US/?
    Bring to their notice.

  • App Store is not responding after Yosemite installation

    After installed Yosemite 3 days ago, I have been encountering many issues: 1) booting very slow (more than 10-15 minutes), even halt sometimes; 2) app store does not respond; 3) some apps like Spotify are cannot be opened. I have been always happy with Apple products until Yosemite. So disappointed!

    What I don't get about this community is how come we have to rely on other users to guess how to fix major problem....SHOULDN'T BE Apple's duty to surf these users issues and give the RIGHT ANSWER ASAP!!!!!
    Anyway I got the same problem...app store stuck!
    Anybody? Any Apple technician around no?
    Thanks
    Carlo

  • Reader dos not respond after update installation

    My system is Win7 and yesterday after installation of an update for my Reader 10.0 version the program does not respond. I tried to uninstall and reinstall it many times but the result is always the same: when I double click onto the Reader symbole, the icon appears for 5 seconds trying to load the program and then disappears.
    How to proceed?

    Two more things to try...
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • My iphone does not respond after upgrading the operating system

    upgrade the operating system to 7.0.2 and iphone 5 will not start, can you help please

    It reads as though you've managed to break your iPhone.  You should make an appointment with an Apple Genius to discuss.  If need be, Apple will sell you a refurbished handset for about $200 + tax.

  • IPhone 3G not responding after upgrading firmware

    I've been given an old iPhone 3G 16GB but as it hasn't been used for a while, the firmware on it was 2.8.?? something. I have the latest version of iTunes so I connected it to upgrade so I could download apps as nearly all of them needed iOS 3+. It was working fine before but since I have downloaded the latest software version that iTunes put on it two days ago (4.3.2 I think) and since then, the whole phone is running really slow and if not connected to a power supply it dies after about 3-5 minutes. It doesn't even charge when connected to a PC.
    I've tried to do a system restore and it doesn't work as it's still the same. I've followed all the tips on the Apple site and nothing works. The only thing that was suggested was to downgrade the firmware but when I try to do that, I get an error 3194 on iTunes. I've even tried changing the hosts file in Windows but that didn't work and the error is still there.
    As it stands, I have a phone with the latest firmware but I can't use it! Can someone please shed some light on this?
    Thanks

    Thanks for the response, I must have got the firware version wrong.
    I don't think it's battery failure as it was working fine for at least a week before I updated it and now all of a sudden after I've updated it, it's gone rubbish. If I charge it from the plug, it's fine but I've noticed as soon as it goes into sleep mode and locks itself (or if I lock it) then it actually turns itself off.
    This may be a silly question but if it is a hardware failure, how do I go about fixing it if I wasn't the original owner and it has no warranty on it?

  • TS1398 Wifi not responding after the software update. restored the system but still no luck.

    After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Iphone 4 not responding after reset

    i have went and reset my iphone 4 via the settings on the phone.
    It closed down and went and reset but has been stuck on the black screen witht the white apple for over 3 hours.
    I have tried to connect it via the itunes to see if it would resart but i have had no luck

    This also happens when the user is restoring a jailbroken device-the Apple logo appears and nothing else happens.
    Try putting your device in DFU (restore) mode by holding the power button and home button until the screen goes dark. Release the power button and continue holding the home button until iTunes detects that your device is in restore mode. After iTunes has detected that your device is in reset mode, click on restore and iTunes will download and install the latest iPhone Software file. 
    MAKE SURE THAT YOUR DEVICE IS CONNECTED TO iTunes BEFORE DOING THIS!

  • Iphone will not respond after trying to put it into DFU mode while in recovery mode.

    I tried to restore my iphone 4 and recieved error 21 in itunes, while in recovery mode I tried to put it into DFU mode and then it turned off and wont turn back on or be recognized by itunes or pc. I tried doing a hard reset and no luck. HELP PLEASE!!!!!

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • My iphone is not responding and the screen is glowing black. How do I get it to turn on?

    How do I fix this? I was just using my phone when it went black. The battery was at 48 % when it turned off. What could be the problem?

    this happened to me and what i did was let it go flat and then charge it and it worked. i dont know if this will help but this is what i did when my phone went black.

  • My iphone will not unlock after the new ios7 update

    my lock button is also broke so how do i get my phone back to normall

    Check the status of unlock on-line.
    https://www.att.com/deviceunlockstatus/client/en_US/?
    Bring to their notice.

Maybe you are looking for

  • How to deal with resource bundle in multiple applications system

    Hi all, I'm building new system depend on the method of one common model with multiple applications for the view objects my JDeveloper version 11.1.2.3 my Question How can i merge the resource bundle for these applications as in the common model exis

  • How to Set the Paper Size in Smart Forms

    Hi Friends,                  I need to SET the Paper Size to default A4 in a smart form...and in some other case we need to set to other type 8.5 X 11...How can i set it....?

  • BPM Enterprise - Create domain Fails

    Hello all I am new to BPM Enterprise I am using BPM Enterprise 10.3.1.0 I am using WebLogic server 10.3 (R3) Databas Oracle 11g I run the configuration wizard to create the directory service and configure the engine. It works fine, but when it reachs

  • H.264 degrades video quality, making my still images soft.

    How can I export this quicktime video without resorting to H.264 so that it will look as good as when I made it in Quicktime Pro 7

  • Looking for GUI building tool

    I am looking for recommendation on tools to build GUI Specifications: Should be as much as like the visual studio tools Use drag and Drop Have the options to edit components and their parameters from gui (like visual studio) instead of in the code I