HT1430 My kid forgot the password on her IPOD and now it will not do anything the Msg says to connect to ITUNES
The IPOD was purchased from Amazon, My kid put a security code on it and forgot what it was and kept trying different combos. Now it is Locked!
Msg comes up "IPOD is DISABLED" conect to Itunes
Ready to throw this thing out the window!
Thanks for any help in advance
Kmc21
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
Similar Messages
-
the log in in comes up and sys login.yahoo...nd%3d13d5f2 and it keep s repeating series of numbers but never opens. It shows my name and says i have mail but as soon as i click on mail it takes me back to login page
That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing. Ipad does not show up in itunes even though cable plugged in. Have shut down and restarted Windows 7 computer.
I had done all of that to no avail. I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again. I had tried switching the USB port at the front of the machine but that had not helped. Everything is good to go again. thanks for your reply
-
i have the i phone four and just uploaded to my computer and now it will not work has the apple logo with a long oval bar under it
It may be that it is stuck loading. You will want to probably first attempt a Hard Reset (Home Button + Power Button for 5-10s until it restarts with an Apple Logo then let it load up) and see if this will get it working.
-
I installed the lastest version of Firefox and now Wisestamp will not work. Will this be addressed?
I upgraded to the latest version this morning and now I can't get Wisestamp to work. The 3D bookmarks are now not working as well. Will there be fixes to these issues?
You'll have to start from the command line see [http://kb.mozillazine.org/Command_line_arguments http://kb.mozillazine.org/Command_line_arguments]
firefox.exe "about:blank: -
After receiving an error when I try to install the latest update of OS-X, I took my laptop to oour schools IT dept. They tried to run the update in safe mode and then they got an error saying the system could not find the hard drive. Now they want to run a clean install which loses 1000's of docs and pictures. I have Block I exams in med school next Monday and all of my notes and slides are on that hard drive.
The IT dept took the hard drive out and tried to back it up and they said they other computer could not connect or find my hard drive.
Major panic....
I have Norton antivirus and have never found any viruses on the system. I also have a program called ExamSoft which some other students here have noted they had similar crashes. Not sure if that is the issue...Several take home messages here:
always back up before you update.
always back up anything you don't want to lose. Kind of like flossing. Only floss the teeth you don't want to lose.
Norton is very, very bad software, and you should get rid of it.
You don't need antivirus software on your mac. Antivirus software on macs causes more trouble than it is worth.
Your hard drive may be failing and thus may not be salvageable.
You could try booting into the recovery partition and seeing if you can repair your hard drive.
If that doesn't work, then there is a small chance that a third party utility (like Disk Warrior or TechTool) might be able to fix your drive (if it is not failing).
If that doesn't work, you may be able to send your drive and a lot of cash to a drive recovery service and see if they can get your files off it.
In the mean time, get notes and slides from a (smart) friend. -
Is there any way to reset my iphone i did the latest update and now i cant download any new apps? I tried to do the general reset but it keeps telling me that my passcode is not correct. This is the same passcode that I use to unlock my phine though to get in to it.
press and hold both the power and home buttons until the apple logo appears and then let them go. Wait till the phone restarts and then try
-
I'm using Int. explore right now because firefox will not work. Every time I turn on my computer in the morning it will not work.
The message box will have an option [start new session] try clicking that.
If that fails you may need to delete sessionstore.js and its coppies and backups to get the sytem working again, but lets try the obvious solution first. -
i downloaded tragic kingdom by no doubt and about four of tthe songs will play about forty seconds in and switch to the next song, they do not play all the way through. i went through troubleshooting online but it was unhelpful and did not fix my problem. i need help, please!
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
My MX922 needed some cartridges changed which I did, and now it will not print. The paper goes thru
My year sold MX922 is about a year old and no trouble until today. I needed to change some cartridges, which I did. They are are full but when I print the paper goes thru and sounds like it is printing but comes out blank. I cleaned the heads and printed a test. The 8 color bars and grid at top came out perfectly. Why can't I all of a sudden not be able to print anything from my computer? I have a Mac 10.7.5.
Hi Artist85,
To resolve this issue, it is recommended that the PIXMA MX922 is reinstalled. Please follow the steps below to uninstall the printer driver:
1. Double-click the Mac HD.
2. Double-click the Library folder. The default behavior of Lion is to hide your user Library folder. To get to it Option-click the Go Menu in the Finder and choose Library.
3. Double-click the Printers folder.
4. Move the Canon folder to Trash. Note: If you have any other Canon printers installed, they will need to be reinstalled as well.
5. Open the hard disk icon again and double-click the Library folder.
6. Double-click the Receipts folder.
7. Move any files related to the PIXMA MX922 to the Trash.
Please use the following steps to download the software for your unit from Canon's web site:
1. Visit Canon's website at: http://www.usa.canon.com/cusa/support/consumer
2. Type PIXMA MX922 in the "Enter Your Model Name" box and click GO.
3. On the Support page for your unit, click the 'Drivers & Software' link in the middle of the page.
4. Under Recommended For You, please click on the MX920 series Mini Master Setup.
5. If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
6. Click on the Download button.
7. A File Download box should appear and the file will be saved automatically.
8. Once the download is complete, close all windows.
9. Double click [mms_-mac-mx920-1_0-mcd.dmg] to install your PIXMA MX922.
Files will extract, follow the prompts to complete installation.
Once reinstalled, please attempt to print.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
my ipod will not function very well with this
Triple click the home button and try going to Settings>General>Accessibility and turn it off off. You may have to use three fingers to scroll the screen to get there. If problems see:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
Next restore from backup if you have not backed up after turning it initially on.
Last, restore to factory settings/new iPod -
Cut the power to my iMac and now it will not complete rebooting when trying to restart
Please can anybody help me?
When this happens to me, I like to work from the outside in. Booting in safe mode can fix issues with with certain things not loading during boot. Resetting the SMC can fix issues like the wrong boot volume specified or a non-standard startup drive.
I like to start with booting from a USB or in your case the install DVD (I see 10.6.7 if your sig). From the install menu you can use disk utility to check out your boot volume and repair it.
If you can describe what you see when you reboot it would help people understand how far you are getting. Also, do you boot to a login screen or straight to the desktop? Did the power go out while booting or while working? -
My apple tv was powered off in the middle of an update and now it will not power on
I have changed the fuse and tried everything i can think of, any help gratefully recieved.
thanks for the reply, i have already tried that and its not worked, any other ideas?
-
I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?
I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation. -
HT1430 I turned my IPad off and now it will not restart. Apple logo comes up but no other screen.
I turned my IPad off and now it will not restart. The apple logo comes up but then it stops????
Did you try rebooting the iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, see this.
iTunes: Restoring iOS software - Support - Apple
Maybe you are looking for
-
New hard drive issues - need help please!
So I just installed a new hard drive on my Ideapad S10 and having the following issues. I get a PXE-E61 : Media test failure check cable & PXE-M0F : Exiting Broadcom PXE rom message. I've uninstalled and reinstalled the drive to check the connecti
-
On the app store i clicked on essentials but i cant exit
does anybody know how to exit because its driving me crazy and i cant redeem stuff on my ipod
-
Do I need to add new users under sun-web for declarative security to work?
Hello, Do I need to add a <principal-name> element under sun-web.xml whenever a new user registers on my website? I am planning to use declarative security for my website, so I went ahead and created a custom realm that uses JDBC to get users informa
-
Is there a PC Card / cardbus option to get lightpipe? (Optical I/O?
Any PC Card/cardbus out there for my PowerBook G4 that gives me Light pipe In/Out? I'm wanting to run QLab to my Yamaha 01v digital mixer, and want the sound to stay digital (via optical cable to my ADAT input on mixer). I could use some device like
-
Rules file lodas only every 2nd row from .txt source
I have prepared a nice rules file, now deployed on the live server. when I copy it over to my dev it stops working because it loads only every SECOND row from my .txt source. Any ideas why that might happen? (I have no rejects specified)