HT1430 my phone seems to be in some kind of tutorial mode and is talking to me. I can't make it stop and don't know how I got there.
My iphone seems to be in a tutorial mode and is talking to me. I can't make it stop and I can't use it without tapping each key twice. How do I get back to regular user mode?
It sounds like you have VoiceOver on.
This article tells you how to turn it off: http://support.apple.com/kb/HT3577
Similar Messages
-
Hello, I am doing a layout in arabic language, and I am missing option of change direction in paragraph. I read on forum that I am supposed to download some kind of an plug in or version of indesign for arabic language support, but I just don't know what to download.
Can you tell me step by step what to do and download.
Thank you very much!InDesign is from a technical viewpoint a Plugin Activator.
Every function is a plugin.
With CC and higher you can change the language in the CC app preferences.
When you change the language, additonal plugins, necessary for that language are installed, with the MENA (Middle East North Africa) versions RTL functionality is added into your primary version.
InDesign chooses to start the program in the same language as you OS is set up, RTL functionality appears translated into your normal User Interface.
After installing a MENA version you can switch back to your main language. -
i have music on my phone but not in itunes and i cant get it off my phone .I dont know how it got there , but i suspect it came from icloud.
if it doesnt match that means your iPhone is not provisioned for the carrier you are trying to use. Your iPhone would need to be unlocked in order to use on other carriers. You will need to contact your carrier to see if this iPhone is unlocked py providing them the IMEI. If the iPhone is not unlocked you will need to contact the carrier that the iPhone is locked to to see if they will unlock the device to use on another carrier.
-
Every time a box pops up in any kind of site where I have to fill in a user name or password, Firefox tries to prompt me w/ old email address and emails. I don't want that to happen and don't want those email shown...how do I delete those and keep that from happening?
Hi Irene,
You should always pay attention when installing software because often, a software installer includes optional installs, such as this adware. Be very careful what you agree to install.<br>
Adware gets on your computer after you have installed a freeware software (video recording/streaming, download-managers or PDF creators) that had bundled into their installation this browser hijacker.
You can use the below steps to revert back to adware-less Firefox.
1) <u>Reset Prefs</u>
*Navigate to '''about:config''' in your Address Bar
*Press the "I'll be careful, I promise!" button to proceed
*Search for <b>trovi</b> and reset all prefs that pull up by right clicking > Reset
2) Remove any programs that you don't recognize or remember installing from your Control Panel (Start > Control Panel > Uninstall a Program)
3) Remove any extensions that you don't recognize or remember installing from Firefox.
*<b>Firefox 29 and above:</b>(Press the menu button ([[Image:new fx menu]] > Add-ons > Extensions)
*<b>Firefox 28 and below:</b>[[Image:Firefox Button]]> Add-ons > Extensions)
4) Download ADW Cleaner to wipe out any remnants of the adware.
*http://www.bleepingcomputer.com/download/adwcleaner/ -
I have a 16gig ipad. I want to get rid of quite a bit of stuff that I have purchased to create space because I can't sync with my itunes library on my laptop. I dont know how to delete from the ipad. Can anyone help please? Terry
Typically you can delete content on the iPad one of two ways - swipe across an item in list view to bring up a red delete button or tap and hold down on an icon to bring up an X to delete option.
Why dont you connect your iPad to your laptop and transfer the purchases and then select exactly what you want to sync to the iPad. You don't have to delete anything this way.
Transfer purchases.
http://support.apple.com/kb/HT1848 -
My iMovie 11 movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.
I would use Quicktime Pro.
See: QuickTime Pro: How to Extract or Disable Tracks at http://docs.info.apple.com/article.html?artnum=42596 and QuickTime Player 7 Help - Extracting, Adding, and Moving Tracks at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c3qt6.html
To get Quicktime 7.6.6 for Snow Leopard see: QuickTime Player 7.6.6 for Mac OS X v10.6.3 at http://support.apple.com/kb/DL923 (Quicktime 7.6.6 is the latest version.)
To upgrade to Quicktime Pro see: QuickTime Player 7 Help - Getting QuickTime Pro at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c2qt.html -
I have purchased my first smart phone, an iphone 5. I would like to use some of the sounds from text messages for ringtones but don't know how to move them over. Any help would be appericated.
I'm sorry, had you already pointed out the rules which stated that lines from 2 separate accounts were eligible??? I don't see anywhere in the advertisement specifically stating that lines from 2 separate accounts would be eligible, so THAT is not what's advertised, either.
As far as I know Verizon's BOGO offers have ALWAYS been for lines on the same account. Possibly someone could chime in where they have received this offer on 2 separate accounts? The ONLY exception to this was someone getting the offer with 2 eligible lines on their account, reactivating the old phone on one of the lines and then giving one of the new phones to someone on another account.
Sorry if you think simply because someone disagrees with you, they are being condescending. That is certainly not the case. Good luck. -
My phone has no more storage but it says i have 5gb on icloud but i don't know how to use them.
My phone has no more storage but it says i have 5gb on icloud but i don't know how to use them.
iCloud storage doesn't affect the available storage on your device. It's for backing up your device and syncing your data, so you can recover the data if needed.
You probably need to import photos/videos to your computer or another destination (like a photo kiosk & burn CDs), and then delete them from your device. Or, delete some unused apps from your device. -
I don´t know how to make a phone call whit my ipad...and how to sent a message? is it possible?
i don´t know how to make a phone call whit my ipad...and how to senSeleneGMt a message? What do i need? or is it impossible?
You can't; not natively, anyway, since the iPad is not a phone. If you want to make a call, you'll need to use some third-party Voice-Over-IP service such as Skype.
I'm not sure what you're asking when you ask about sending a message. If you mean a text message, you can either use iMessage, which can send messages to other users also running iMessage, or you can look in the iTunes Store for SMS apps, a few of which are available. They use separate services to actually send the message and so require an Internet connection, either WiFi or 3G.
Regards. -
I plugged my phone to my computer and accidentally pressed "don't trust" now I don't know how to put songs on my phone from my iTunes ): what do I do?
I'm having the same problem... So far doesn't seem to be any fix for it.
People will try and tell you "Apple say just reconnect the device" but if that was the case, well... we wouldn't be here would we lol. -
Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem:
Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
If I know the song title I can select the songs tab and find the song that way,
I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
Thanks for your helpTry assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.?
I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!! -
My system consists of differents vi´s.Some of them are used to read analogic inputs and digital inputs, using the serial port.
The values that I read, go through differents vi to be proccesed, and at the end, these values are written in a file, all the values in the same file.
My problems of synchronization are:
1. I have one vi per input, and all of them use the same serial port. How can I synchronize them to avoid serial port conflicts? (using queues??) And how can I do, to get differents number of samples/sg with every vi? I have to introduce them in differents loops?
2. The other problem is that, for example, I want to read 8 samples/ s but I only want
to write two samples every second. How can I do to avoid stoping the data flow?
Maybe, my problem is that I want to see the system like
one block, and I am ignoring that, although all the system works like a block, every part works using a different "speed". I don´t know how tools can I use to combine two ideas, working like an only system( data dependence, some vis need the data of others vi to be able to work) and working getting differents numbers of samples/s.
I have seen that there are synchronization vis. I am going to glance at them, maybe I find something interesting but I amsure that your help will be very useful?
Thanks in advanced!!
GraciI think you are pretty much on the right track with Queues. I have implemented a very similar system myself using queues. I have even different systems connected to the serial interface, but I can synchronise them all easily using the following method:
1) Make a VI for opening the serial port and reading the data. The data (parsed to extract the numbers required) are then stored in an array (Shift register). If the pre-determined time delay is reached (say 5 seconds) the values are averaged and written to a Queue with a defined data type. Save the VI as a VI template.
2) Make a VI which starts an instance of this template VI for every channel you require. You can use VI Server to set values on the new front panel before you set it's property to "running". Setting a timer value for all can help ensure that the X-Axis of your timing values (if you require) are synchronised. The clue here is to define and initiate a QUEUE per channel. (RS-232_1, RS-232_2 and so on). The QUEUE name needs to be passed to the VI Template before running so that each VI running in the background has an individual link to the main program.
The second part of this VI simply uses an array of QUEUES, polling them one after another with a timeout of, say 5 ms. If data is found, append accordingly to an XY-Graph.
I also add in some "Auto termination" in the VI template (MAx number of values allowed in the QUEUE for example) to allow for the background processes to find out if the front-VI is still running or not. There are many different ways to do this, shoose the best for your application.
With this approach, it's not even important what instrument is connected as long as data is written in a specified format into a known QUEUE. I have also developed systems where I can transparently (almost) drop in VI Templates for instruments with similar functionality (output data) from different suppliers.
I would post an example, but the time it would take me to clean it up is too large. Sorry. If you have any further questions, don't hesitate to ask further questions.
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2) -
I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download. I don't know how to tell which of the photos is corrupted so that I can delete it and try again? Thanks!
If this is an iCloud account the Outbox only appears when sending an email, so if it is still trying I suppose it should be showing now (not sure though, hard to replicate this)
What type of email account?
Maybe you are looking for
-
How do I embed multiple font outlines in dynamic text field
Can anyone tell me how I can embed multiple font outlines in Flash MX so I can get smooth text in a dynamic text frame? I want to use Regular, bold and italic in various parts of the text. I was using the Character button in the properties manager an
-
Issue with the activation of transfer rules
Hi, I am working with the datasource 0PRODUCT_TEXT, and I am trying to install transfer rules from BI Content and unable to get the active version. But the transfer rules are showing inactive and the error is as follows. Error generating program Mess
-
Problem with DATASET_CANT_OPEN
Hi There, Had a look through the search and no joy, basically we have a problem where we use OPEN DATASET for output in text mode, followed by a TRANSFER later within a loop endloop. The problem is that the program dumps on the TRANSFER but the messa
-
Windows 8 64 cannot reinstall itunes
I had Itunes working fine, the for the first time, I downloaded photos from my new Iphone 6 and now Itunes won't work. I uninstalled everything in the order suggested by Apple, then downloaded and saved and ran as administrator the 64 bit version of
-
The company I work for is in the process of switching from a Maestro system to a Mac Pro DVD SP system. We just purchased a ATTO Express PCI UL50 LP card for the Mac and found that the card uses a high density SCSI port, which doesn't match the Quant