HT1430 No sound in videos
No sound in played video or mp3
When you mention that MpegStreamClip will export both sound and video from muxed files, am I then able to export my Mpeg file to "Movie to Ipod" and get sound? (I tried it but it did not work..maybe I did not do it correctly. But I did not see an option on the MpegStream Clip to convert Movie to Ipod.
Dick is quite correct here. If you open the "Export to MPEG-4" window, you will find an iPod "pre-set" at the top of the page next to the Encoder pop-up. This pre-set will produce a single-pass, H.264/AAC, 4:3 aspect ratio, 320x240, baseline profile in an .mp4 file container. This is probably the best combination for speed, quality, and iPod compatibility. However, this application has not been updated to handle the new LC profile. So, if you want create 640x480, high video data rate, chaptered movies for your iPod, you will have to create an intermediate file and/or go with an alternate work flow. I have used and been very satisfied with results from a DV A/V encoded which was reprocessed in QT v7.1.3 Pro. Both ViddyUp! and ffmpeg have updated their offerings with the former working well and the latter still balking at extremely long VOBs.
Here is a 14 minute/164.5MB widescreen (640x272/2.35:1) Test File created by MPEG Streamclip in conjunction with QT Pro v7.1.3 using the LC profile to produce a chaptered file.
Similar Messages
-
Hello, I have no sound playing videos and no sounds when playing videos r escorted with this iPad. Sound. Is turned on under settings would appreciate any help please
Sound is not turned on in Settings (except for alerts). Sound is controlled by the volume up and down buttons on the side of the iPad (in portrait mode). Make sure that sound is turned up with those buttons.
Another thing to check: if earphones are plugged in the iPad speaker is silenced. -
Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?
The mini dvi on the MacBook will only support video, in order to get audio you'll need to a cable from the sound out port to the sound in port on the TV.
-
Any help on connecting a macbook pro (late 2009) to a 2010 toshiba 40" for both sound and video? I have the mini-hdmi cable, but have no idea about running sound through the tv. I can use the headphone jack, but don't know where to connect it to on the back of the tv. Am I supposed to change any settings on the tv or computer to allow the sound to go through the tv? thanks for any help.
You need a stereo mini to RCA break out cable.
https://discussions.apple.com/message/16276201#16276201 -
Loss of sound and video playback on ENVY X2
Every so often, more often than I would like, my HP Envy X2 loses sound and video playback capabilities; any ideas anybody? The concept of this machine is great and have had it for the past 9 months but this loss of sound and vision is so unpredictable and frustating...
Hi Brumage,
I saw your post regarding the sound and video issues and I will be happy to help. Do you get any error messages when this happens? Have noticed if it is a particular site like YouTube or program that you are using when the issue occurs or does it occur on all programs? When you restarted the Envy X2 does the issue go away?
I would start by suggesting that you make sure all updates have been installed through HP Support Assistant and Windows Update.
What operating system are you running? What is your product number?
Find your product number on a notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
Docked iPod only outputs sound during video to TV
I have a 5G iPod in an Apple dock, connected to my TV using a Monster audio cable and an S-Video cable. For some reason, it only outputs sound during videos or a photo slide show - not at all for music only playback. I'm baffled! Any idea why? It's a Panasonic plasma, and I've tried three different inputs. None work for music, but video is fine.
The iPhone 4, unlike iPod, doesn't ask you to set for PAL or NTSC. In fact, in the SETTINGS/Video menu it only asks if you want to "Start Playing From Beginning", "Closed Captioning" and "Home Sharing". I was surprised it had no settings like the iPod at all.
-
I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.
Recurring theme with the 4s losing alerts except for the phone ringing. Most complaints seem to center on the 7.1 upgrade. The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back. When you get the sound back, the volume buttons start to work again. Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.
-
No sound or video in Finder Preview window anymore
Hello everybody,
My hard drive recently crashed and I had to get a replacement drive, reinstall OSX, and migrate my backup clone back to the hard drive with SuperDuper. Everything is running fine, except for some reason I can't hear any sound, or see any video when previewing movies or mp3s in preview. The time marker moves to the right, but there is no sound or video. Sound works in itunes and in Quick time, but not in the preview?Volume is up all the way. I tried some sort of suggested adjustment in the Audio Midi utilities screen to no avail. Any suggestionsOk, i figured out what the problem was. For some reason I had to install Flip4Mac to make the previews work again. Hope this helps everyone else.
-
Ok, so I have a few videos I want to put on my ipod. Well actually I have put them on, but, only one works. I know that you have to convert the files into m4v before putting them on iPod, and that's what I have done. However, previous to the conversion only ONE of those files was an MOV file (.mov) and the rest were mpg/mpeg . The ".mov" video worked on my iPod, sound and video. The others didn't, only the video part, no audio. Why is this? I know that there have been a lot of posts relating to this, but I found my situation to be a little more specific and decided to give it a shot, since the other sweren't so much in my "ballpark" of problems.
ThanksiMovie does not work with muxed MPEG-1 and MPEG-2 clips
When using any version of iMovie, please note that you cannot import muxed (multiplexed) MPEG-1 or MPEG-2 video clips into projects. If you try, one or more of the following things can happen:
iMovie refuses to import the clip and displays an alert instead (such as "File could not be imported because QuickTime could not parse it. -2048").
iMovie allows you to import the clip, however:
You won't hear audio on playback.
You won't see video on playback.
When you export the project to QuickTime, iDVD, or a connected camera, the clip no longer contains audio.
When files are muxed, they contain interleaved audio and video tracks (they're mixed together instead of stored in separate tracks). Because of this, iMovie cannot support them.
If you want to find out if a movie file is "muxed," follow these steps:
Open the original movie file in QuickTime Player.
From the Window menu, chose Show Movie Info.
Click the More Info disclosure triangle in the Movie Info window (if it's closed).
Note the entry next to "Format."
If the format is "MPEG1 Muxed" or "MPEG2 Muxed," you can't use the clip in iMovie. You may want to consider using a third-party utility to convert the clip to DV format for use in your iMovie project.
Note: If you have the QuickTime MPEG-2 playback component installed, it may not change the issues described above. Editing muxed MPEG-1 and MPEG-2 files is not supported in iMovie, even with this component installed
Understand about iMovie Now? No under no circumstance should you convert twice. Quality will go downhill and fast. I convert to MPEG-4 ASP (Simple Profile). This is why all my videos continue to play correctly even after the new IPOD updater. I am not a MAC user so I will refrain from suggesting any programs. Folks have mentioned Handbrake although. Learning how to identify the different video formats and the different standards within each is important to success and getting your IPOD full of videos. -
I get sound no video when using AirPlay. Any ideas?
I get sound no video when using AirPlay. Any ideas?
Do you get an "HDCP error"?
Since the last ATV software update, I have had problems playing You Tube content from the iPad to the ATV using airplay, yet the same content from the You Tube channel on the ATV plays fine. I get the dreaded "HDCP error" which is nonsense, as YouTube content does not have this protection. Netflix also gives the same error. (I have posted seperately about this problem.)
I have had a couple of years of fault-free playing with my setup, the only thing that has changed is the Apple ATV software. Ergo, they need to fix whatever bug they introduced. None of the recommended "fixes" have worked. -
My IPOD WONT PLAY SOUND ON VIDEOS
i just got an ipod and i can play videos but there is no sound. the videos i want to play are music videos i have downloaded and ren and stimpy videos and meet the barkers tv series. i have clicked convert to ipod in itunes and they convert but after they convert they lose there sound on itunes and when i transfer them to the ipod there is no sound. has anyone else got this problem or have an idea to correct it. please help cuz i have minimal ipod / computer knowledge and i need all the help i can get thanks
i downloaded a few videos and they played fine on
itunes. BUT, they couldnt be added to my ipod. i
followed instructions to convert them for my ipod but
the converted videos dont have any sound. when i put
the converted videos on my ipod, they wont play- they
show up like a song- white background, name of song
and band, and, instead of the album cover, there is a
still frame from the video. is there something wrong
with the videos??? help!!!!
That sometimes happend to me when I converted the videos using Itunes....So, I use this converter instead...
Videora Ipod Coverter
http://www.videora.com/en-us/Converter/iPod/
It'a a free program to download and your videos should play fine in your ipod once you use this to covert them.
As for the videos not playing for you, it could be the fact that you coverted them using Itunes, so try the above converter instead and that should work okay. If that still doesn't work for you try getting your settings back to their original state - Go to 'Settings' and then 'reset Settings' and this will put your settings back the way they were once you bought the ipod originally. The videos should definately play in your ipod then.
If you need anymore help, just let me know, I know how annoying it is when the videos won't play properly!!!
Good luck with it!
Dell Windows XP Pro -
Can't play sounds on videos when using 'Facebook', music plays
On my wife's iPad she cannot hear sound from video clips when in 'Facebook', but she can hear sound when she opens iTunes. Any help, suggestions?
Sorry I don't. It just happens at random and usually most YouTube videos and other similar styled videos. I'm not really a tech guy but it just seems like there is something else going on. Everything else on my PC works fine except when I want to open a video using flash. It isn't just one site or one video it is nearly every flash video and it's almost like they're loading one at a time except in no order if there is more than one tab. Even if it is just one video, it takes a long time to load.
Imagine going to YouTube to load up a vid and the controls or progrss bar never load, it just stops and only a solid black box is displayed. Eventually the controls load and it seems like it's about to play at any moment.. only the waiting lasts 5 minutes. Even if you refresh it still has to do this all over again. -
Airplay iTunes 11 only streams sound, no video, What's the fix?
I have macbook Pro Mid 2011. Watching video from itunes library through airplay and Apple TV works fine for both video and audio. Streaming movie from itunes store only plays sound, no video. Tried other videos from You Tube and they worked fine. Is there a fix here?
I have macbook Pro Mid 2011. Watching video from itunes library through airplay and Apple TV works fine for both video and audio. Streaming movie from itunes store only plays sound, no video. Tried other videos from You Tube and they worked fine. Is there a fix here?
-
No sound while video recording on N500!
Hello! I just bought Lenovo 3000 N500 for my sister who is in Germany...I want to check everything on laptop, because I want her to use it to skype me...Everything is lovely, except I can't get sound while video recording...Is it possible this laptop has a webcam, but no integrated microphone? But when I go and use windows sound recorder that comes with Vista it records audio...But I can't get video to work with audio recording in the same time...Anybody there with a solution? Thank you , people!
Same problem. Here's my solution:
For now i record video using an app calle "Video FX Live". It records sounds clearly. Native iphone app still doesnt records any sound.
So this proves the sound issues during video recording or facetime IS an IOS BUG. -
i have an i pad 2 and apple componet av cables. can i play movies from itunes? i cant seem to get sound or video.......thanks
Update your Quicktime to v7.1.6.
MJ
Maybe you are looking for
-
Differentiate between SNP Deployment generated Purchase Requisition in R/3
Hi We are implementing SNP with Deployment. Purchase Requisitions are being generated from both SNP Heuristic run and Deployment heuristic run and they are transferred to R/3. So using TC MD04 in R/3, we can see both Purchase Requistion coming from t
-
Objects disappear in preview mode
I am using InDesign CS3. I have placed drawings from Illustrator CS3 on a page and also have text on the page. When I work in normal viewing mode I can see all the text and drawings. When I go to preview mode all of the objects are not visible (text
-
Error message when trying to run check device credential job
unable to run check device credintial job. says to check cda.log:
-
Can I purchase a version of Pages?
Can I purchase a version of Pages for my 10.7.5 ?
-
Problem transferring video using RMI
Hi frnds...I have a code which transfers images using rmi.....this code works fine.....but if i give a .avi file instead of a .jpeg the file gets transferred to the other machine but it gets corrupt...the size is also the same.....do i have to encode