HT1430 RECEIVING CALL OR CALLING OTHER THE SOUND IS NOT CLEAR AND IT NOISLY

Dear Friend
My Moblie phone is iPhone4S by below Serial No.:
C39H33PJDTDM
Unfortunately receiving call and calling beep and hearing others in the phone is not clear and is very noisy.
As I am in Davao-Philipiine tried to find Apple store but they don't accept to repare the problem.
Please guid me how can I have apple servic here.
Looking to hearing from you soon.
Best Regards
Daryoosh

Contact whomever provides service in your country.
Keep in mind that if the device was purchased in another country, warranty and support are ONLY valid in the country of original purchase.

Similar Messages

  • When I put in my earphones to listen to music the sound isn't clear and I have to push and hold them in it in order for it to be. It's not the earphones because I use them in my laptop and they work fine. Is there a way to fix this problem?

    Whenever I put my earphones into my iPod Touch 2g the music isn't clear and I have to push and hold them in order to hear the song normally. It isn't the earphones because I tried another pair, that worked fine, and there was still no difference. I also use the same pair of earphones in my laptop and it sounds great. Is there a way to fix this problem without having to buy a brand new iPod touch? Do I need to clean it or something? And if so, how would I go about doing that? Thanks!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    If still problem that indicates you have a bad headphone jack.
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. Likely not worth it for your old 2G iPod
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • In some websites, the caracters are not clear and impossible to read when I scroll down. I have to pass my mouse over it to clear the caracters.

    It does that in my Hotmail inbox, my bank account web sites,...
    It started to do that about a year of 2 ago. So I started to use Chrome instead. This morning I'm using Firefox because I saw they upgraded and I thought it would not do that again, but the problem is the same.
    I open a website la my Hotmail account. The caracters are clear at this moment. Then, I scroll down, and I cannot read some lines of caracters. And it seems like the problem is sporadic. I added NoSquint, and the problem is the same.

    # Click the ≡ Menu Button and choose Options.
    # Click the Content icon.
    # Click the Advanced button.
    # Make sure "Allow pages to choose their own fonts" is checked, then press the OK button.
    # Click the Colors button.
    # Make sure "Allow page to choose their own colors" is checked, then press the OK button.
    If that doesn't help,
    # Click the ≡ Menu Button and choose Options.
    # Click the Advanced icon.
    # Click the General tab.
    # Click "Use hardware acceleration when available" to toggle that setting.
    # Restart Firefox.
    If that doesn't help either, check if you have the same problem in Safe Mode.
    * [[Troubleshoot Firefox issues using Safe Mode]]
    If yes,
    # [[How do I create a screenshot of my problem?|Attach a screenshot of the issue]].
    # Select the unreadable text, then right-click the selection and choose Inspect Element.
    # In Inspector pane that opened, click the Fonts tab on the right. What fonts are listed as being used?

  • My sound is not synchronized and makes a funny noise

    not sure what to do wether i liten to music or watch a movie the sound is not synched and you have to put on pause and thenit cathes up for a few seconds but then makes funny noise at times what can i do

    Update BIOS, Audio Driver and Chipset driver
    ||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
    //Click on Kudos if my reply was helpful and answered your question//
    ||-If my answer solved the problem please mark the topic as the accepted solution-||

  • My sound button cant function even the sound also not sound but when i received call, it do ring..just when i try to play utube or play music it will never have sound...please help me. now i'm using ios7. It just recently happened.

    My sound button cant function even the sound also not sound but when i received call, it do ring..just when i try to play utube or play music it will never have sound...please help me. now i'm using ios7. It just recently happened.

    Hi hayscart,
    This article contains steps to try when you are having trouble with the iPhone's speaker:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    - Ari

  • My phone will not light up when i receve test messages, calls, or other notifications. i have the sounds all turned on and everything turned on i could in the settings but it still wont  work...?

    My phone will not light up when i receve test messages, calls, or other notifications. i have the sounds all turned on and everything turned on i could in the settings but it still wont  work...? please help!!

    Make sure that you have do not disturb off. If you pull up notification center it will be the crescent moon.

  • My phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

    my phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • Why is it that my iPhone 4 suddenly lost the sound bar in music and YouTube?  I am able to make phone calls, but otherwise my iPhone is silent.  It says that it is playing music, but no sound is emmitted, nor am I able to change this.

    Why is it that my iPhone 4 suddenly lost the sound bar in music and YouTube?  I am able to make phone calls and hear everything just fine.  but otherwise my iPhone is silent.  It says that it is playing music, but no sound is emmitted, nor am I able to change this.

    Not knowing what steps were included in "all the troubleshooting possible with Apple people," I'll suggest you give the phone a chance to reprovision your cellular account.
    First turn off Wi-Fi. Then power off your phone. Hold the Sleep/Wake button until you see the power off slider. Then slide to power off. Turn the phone back on. After the phone starts watch to see if No Serive is displayed. Hopefully after 15-30 seconds that will change to the name of your cellular service provider and finally indicate LTE or 4G as well as include some dots indicating signal strength. You can then turn Wi-Fi back on.

  • I cant call to a mobile number since yesterday, but can receive call from the same number. I am using iphone 4s. Is there any setting error?

    I can't call to a mobile number since yesterday, but still can receive call from the same number. I am using iphone 4s. Is there any setting error?

    you have to make sure that CFWD Bridge Mode under the Line tab of the SPA9000 where the SPA400 is registered is set to ALL...include VMSP Bridge and XFER Bridge Mode as well..power cycle then check if you are still getting one-way audio
    | isolate! isolate! isolate! |

  • Receiving calls marked "Private".  Who can make and how do you make these calls?

    Receiving calls marked "Private".  Who can make and how do you make these calls?

    Anyone can make them, just dial *67 in front of the # you're calling.

  • I have just changed my sim from vodaphone to tmobile and my new sim wont work it is coming up emergency calls only, the iphone is not a vodaphone phone and as i am awhere it is a unlocked handet, can anyone give me advice pls

    i have just changed my sim from vodaphone to tmobile and my new sim wont work it is coming up emergency calls only, the iphone is not a vodaphone phone and as i am awhere it is a unlocked handet, can anyone give me advice pls

    You will have to ask Vodafone to do it for you.
    Here is a link to their online form http://campaigns.vodafone.co.uk/UnlockCodeRequestForm/

  • I want to cancel my membership but the chat is not available and can not call

    I want to cancel my membership but the chat is not available and can not call

    This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either.  I have tried making it louder quieter, restarting my computer, HELP!

    I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either.  I have tried making it louder quieter, restarting my computer, HELP!

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
    3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
    4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
    9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    10. Reset the NVRAM.
    11. Reset the SMC.
    12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
    13. Make a "Genius" appointment at an Apple Store.

  • I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack.  The problem is that the sound is extremely muffled and bass-heavy, with little treble.

    I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack.  The problem is that the sound is extremely muffled and bass-heavy, with little treble.  I have to turn the bass control on the stereo receiver to pratically zero in order for the sound coming through the stereo to be acceptable.  Is there a setting on either the iPod or the stereo that I need to change in order to fix this?

    The phono input is for a phonograph.  The iPod does headphne output is not that same as a phongraph output.  Does th stero have an AUX input?  That should be compatible.

  • In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

    In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

Maybe you are looking for

  • How do you run a Process Chain using parrallel processing group

    Does anyone know the answer to the above question please? The problem i am getting is that currently the Process chain is running on the client server and is timing out! is there a config setting or some other setting that is needed to stop it from t

  • Since upgrading to Firefox 5 I cannot view my emails on my ISP's web site, can you help?

    Since upgrading to Firefox 5 I can no longer view my emails on my ISP's web site, can you help?

  • How to archive my email to my local mac

    Hi All, my email keeps freezing and I thought its better to archive it locally and rebuild it again , any idea how to do it ? thanks Fuad

  • Replication in Oracle 8i

    Hi, I got a job to configure replication between my two different oracle 8i database. I have worked on oracle but i don't know how can i configure replication. My scenario is that I have two oracle database server both will be master and i want to co

  • Wrong Stock Opening Balance

    Dear Experts,   After 15 days of going live and uploading materials opening balance from "MIGO" transaction and "561" movement type and after the production department makes process orders and sales department  makes sales orders on a specific materi