HT1430 screen on ipad frozen. picture shows itunes ans usb cable.....help

ive turned it on and off but nothing is changing

That implies that it's gone into recovery mode : http://support.apple.com/kb/ht1808
You will need to do as the image indicates and connect it to you computer's iTunes, you should then be able to reset the iPad and restore/resync your content to it

Similar Messages

  • My ipad 2 just show itunes n usb logo at screen after update ios8.1.2.It just freeze there.but not happening to my ipad air n ipad mini!!!what to do?i dont wanna lose any data on it.

    My ipad 2 just show itunes n usb logo at screen after update ios8.1.2.It just freeze there.But it not happening to my ipad air n ipad mini!!!what to do?i dont wanna lose any data on it.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • I have an iPhone which froze during software update to a picture of iTunes and USB cable.  I have never loaded this device on my computer.  How do I unlock the phone?

    My iPhone froze while downloading a new update.  The screen now shows a picture of iTunes icon and USB cable.  How do I unlock the phone if I never registered the device on a computer?

    Have you tried to restore the iPad back to factory settings from within the Setting App?  You might also try and hard "reset" by holding the power button and the home button at the same time until the iPad 2 restarts.
    Besides that, find a friend with a computer and try to update it from their comptuer, or if it is close and convenient go to the Apple Store and they will be able to help you.

  • Ipad shows itunes and usb cable

    My iPad mini doesn't start. It only shows an itunes icon and a cable with an usb connector. I have already coneected it to my laptop and started restoring but it doesn't work (error 26) :-(
    What can i do now???

    Read
    http://support.apple.com/kb/ht1808

  • Frozen iPod touch - iTunes to USB cable screen

    Can anybody help?? Ive tried all the advise I can find on the net and cant get through this screen. When connected to my comuter, the new hardware found box is generated, but there is no communication possible between the two devices.
    Ive tried to connect on other comuters and the same happens.
    HELP!!

    Start with this article - http://support.apple.com/kb/HT1808
    It also sounds like you are having a problem with the Apple Mobile device driver - see this article - http://support.apple.com/kb/TS1567
    And finally, if you need to, remove and install iTunes again. See this article -
    http://support.apple.com/kb/HT1923 (Vista)
    http://support.apple.com/kb/HT1925 (XP)

  • Unit showing iTunes and USB cable only and iTouch is "frozen"

    Here is how I cleared this up and got the unit working again after downloading and installing 2.2.1 and hosing up the unit. Some of these steps may not have been needed, but it worked for me!
    Loaded iTunes to another pc (Windows XP). Opened iTunes and connected the unit via a usb and now iTunes did recognize my unit. My regular machine would not even do that! iTunes said a unit that was in "recovery mode" and you could not use it with iTunes until it was "reset". So I clicked on "reset" and got connected with the download on Apple and it started downloading the files necessary, it said. Found out later it was the 2.2.1 upgrade. Anyway after several hours the download finished. I then held down the "shift" key and clicked "restore" at the same time and a window opened and I had to search for the download which was in "document and settings, owner, application data, Apple Computer then iPod software update and there was the file. I opened that and it started working on the iTouch. After it completed, I moved the unit to my regular pc and it then recognized my unit and I hit restore again (I am a little hazy about this step because I got real excited when the unit was recognized, but if you get his far I think you can figure it out) and it set my unit back to it's old self. I then had to resync the music, applications etc.
    So far everything is now working. If you have any questions, please yell. I have written this in a hurry and maybe some of it does not make sense.

    I am not familiar with error 18.  This article is my goto for all error codes
    http://support.apple.com/kb/TS3694
    When you see iTunes and the USB icon, you have to restore it. You may have to place it into recovery mode. Follow the instructions here if so.
    http://support.apple.com/kb/HT1808

  • I click s/w update in ipad after few mints its screen turns to black and showing itunes logo..plz suggest wht to do

    i click s/w update in ipad after few mints its screen turns to black and showing itunes logo..plz suggest wht to do

    Do exactly what the screen is telling you to do. Connect the iPad to your computer and launch iTunes. You either have to update the software that way, or you have to restore the iPad because something went wrong with the update.

  • Notified of iTunes update for iPhone; tried to download; phone inoperable all day. screen shows itunes logo and cable

    I was notified of an iTunes update for my iPhone; I tried to download, but am just showing the screen with the iTunes logo and a picture of a cable end. Phone has been inoperable all day.

    Hey there Gina,
    It sounds like you were updating your phone, and now it is unresponsive with an iTunes and usb cable on the screen. This appears to be recovery mode, and you should be able to restore the device using the following article to get that install completed:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    If not, then reset the device with the following article, and then attempt the restore with the above article:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • My Ipad not booting showing Itunes logo, was trying to update the software. what do i do?

    My Ipad not booting showing Itunes logo, was trying to update the software. what do i do?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • My ipad 2 just shows itunes and plug icon my computer wont take new version of itunes too old how do i get my ipad 2 working do not care about saving data just want to use this very expensive useless item!

    My ipad 2 just shows itunes and plug icon my computer wont take new version of itunes too old how do i get my ipad 2 working do not care about saving data just want to use this very expensive useless item!

    My iPad2 works great now after IOS 8.1 Update
    I did my iPad2 update thru iTunes on my iMac and it was sucking the iMacs memory very low during the update. Safari froze before loading the first web page and I did a hard boot and went fishing as I saw where it was going to take a long time to recover. When I tried again it wasn't quite right and then did one more hard boot and then did a Reset by going to General-Reset-"Reset all Settings" and it works real well now without loosing any data and in-home wi-fi clocks at 17Mbps download. Probably like most of you I’m sticking with OSX 10.9.5 Mavericks as it gets the job done very nicely and don’t need all that extra fancy stuff that probably will slow things down.

  • HT4623 ipad froze and shows itunes with plug while updating with iOS

    ipad froze and shows itunes with plug while updating with iOS.

    That message means that you have to restore the iPad using iTunes now. Something went wrong. This explains how to do it. Read it thoroughly before you start - and take note of the end of the article under Additional Information where it talks about using recovery mode. You might need to use it.
    http://support.apple.com/kb/ht1414

  • Even after doing the recovery of my iphone 4,  still i am getting a picture with itunes and usb port in phone.  showing only the emergency call

    I did a recovery of my iphone4.   After extracting,  recovery and verifying  completing,  my iphone restarted.    But still i can only see the picture with iTunes and USB port in the iphone 4.   Only the emergency call is allowed.
    After recovery and re-start of my iphone4  the itunes doesn't detect my phone.       What should i do now

    DFU Mode and restore again, if it doesn't work, well then...I suggest you try using a custom firmware maker (sn0wbreeze), NOT for the jailbreak, just to try and fix your phone.

  • HT201210 I had an update message on my phone and I clicked yes to update.  Now the phone has a picture of itunes and usb connection, but can't be used.

    I had an update message on my phone and I clicked yes to update.  Now the phone has a picture of itunes and usb connection, but can't be used.  itunes says I have to restore my phone, but will lose all the data.  Is there anything else I can do? I really don't want to lose all my pictures and other data.

    It's in recovery mode. There is nothing left on the phone at all. If you didn't back it up before you started, your data is gone.
    you have no choice but to restore at this point.

  • Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank

    Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank

    Do as the image suggests, connect the device to a computer running iTunes.
    If it is still not working, try posting in your native language.

  • What can i do when my iphone 4 doesnt respond to anything and all it shows is the usb cable under the blue itunes icon?

    what can i do when my iphone 4 doesnt respond to anything and all it shows is the usb cable under the blue itunes icon?

    try using iTunes

Maybe you are looking for