HT1430 Sleep/wake button is broken. Can I redirect the sleep/ wake command to another button?

My wife also has an iPad 1. Her sleep/wake button is broke. I downloaded sb settings so she could shutdown to charge. She has to plug in to wake. Can I redirect the sleep/wake command to another button?

Are you charging it from the wall outlet? Or from a computer? It shouldn't need to be powered off to charge from a wall outlet.
However, it appears that you have jailbroken the device. This can cause problems with the functioning of the device. There's really not much we can do to help you with a jailbroken device other than to suggest you restore it to its original factory state.
Best of luck.

Similar Messages

  • How can I redirect the library to look at another drive

    I have an mp3 collection which has outgrown my hard drive. It is in a folder on the desktop with subfolders (representing albums) which contain the mp3s. My modus operandi is to drag and drop album folders into the playlist window which creates a playlist. I don't import them, per se, so they don't end up in ~/Music/ITunes. I have a gozillion playlists as a result. I bought a new behemoth drive and have copied the music collection to it but I don't relish the idea of rebuilding the playlists by hand. I tried exporting the Library song list as text and editing it so all entries have the new drive listed instead of the old drive, and then reading that file in using an applescript that was designed to repair corrupted libraries. It went through the motions but didn't change anything. (Seemed like a good hack) Anybody have any ideas on how to do this?
    G4 tower & G5 tower   Mac OS X (10.3.9)  

    I just moved my library over and then created an alias in place of the library. My library is the ~/Music/iTunes type, I don't know if it would work for you, but it could.
    What is this AppleScript? If you check back in the forum you'll see I have a thread about my library being corrupted. Although it appears to be the files, I wouldn't mind trying a library maintenance tool.

  • I removed my SSD card from my broken macbook, how can I transfer the data from it to another computer?

    I removed my SSD card from my broken macbook, how can I transfer the data from it to another computer?  I have an iMac now or a PC. 

    You can put it into any notebook SATA enclosure such as Build your own External/Add your own drive up to 1.5TB! OWC Express USB 2.0 Express Kits From $18.79 USB 3.0 Express Kits From $21.99.

  • How can i pass the value one from to another form?

    hi all
    how can i pass the value one from to another form  with out use it when ever i want to needed this value that ican useit?
    like i have two fields U_test1 and U_test2  table name @AUSR
    that i have  four form  A! , A2,A3,A4    please tell me in details....?

    Hi,
    U can assign the values to some variables and access then in ur required forms.
    Vasu Natari.

  • Can i redirect the responses to my form

    can i redirect the responses to my form to a specific email address verses being sent to the response section on formscentral??

    Hi,
    Currently we only support sending Email Notifications to form author. I'm not sure which specific email address you are talking about. Is it also a FormsCentral ID? If so, you could share the form to it, and make it as Co-author. Then you (or the owner of the ID) open the shared form and enable the Email Notifications in Options tab. Please let me know if I misunderstood your question. Thanks!
    Kind regards,
    Shiyao Bao

  • I forgot my password and email Forgot your private cloud small my daughter and I can not use the device jewelery Is there another way to run the machine?

    I forgot my password and email Forgot your private cloud small my daughter and I can not use the device jewelery Is there another way to run the machine?
    I hope there is a solution to this problem note that I can not use the iPad now

    Your question makes no sense and I'm not sure if you typed very quickly and autocorrect went nuts on you, or if you are not a native English speaker and Google Translate didn't work properly. If you are saying that you forgot the passcode to unlock the iPad, follow the instructions here.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • I have an ipod touch 4s with iOS 6.1.6 and i can't download some apps because i need iOS 7 for example FACEBOOK how can i have the iOS 7 without buying another ipod or will the update of iOS 7 apeare sometime for my ipod touch 4s?

    I have an ipod touch 4s with iOS 6.1.6 and i can't download some apps because i need iOS 7 for example FACEBOOK how can i have the iOS 7 without buying another ipod or will the update of iOS 7 apeare sometime for my ipod touch 4s?

    See App Store: Install the latest compatible version of an app to get Facebook for iOS 6.

  • How can i disable the automatic move command?

    how can i disable the automatic move command?  when i choose the move command it automatically moves whatever element that's selected, using the previous dimension used to move something.  Big Problem.

    went back to see if Preview was checked - it isn't.
    It happens when we double-click on the arrow to open the move dialouge box, but the box doesn't open - instead the selected item is automatically moved #!@**
    that's what we need to stop... any ideas?

  • HT1430 Following these instructions I still can not reset the iPod.

    It still reads iPod disabled, connect to iTunes.  I have connected to iTunes and no luck.  Please help

    Placing your device into recovery (DFU) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • My daughter has a ipodtouch that we have set up now i need to set up a ipod shuffle how do i do this can i use the same account or start another one

    my  daughter has a ipod touch now i need to add a ipod shuffle i have no idea how to get started can i use the same account i can't even figure out how to sync it  HELP

    yes you can have multiple devices on one account just not in the same library before you sync it create a new library by:
    If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
    Then add the songs you want
    THen yuo can sync sync it by plugging in the usb cord the computer then plug in the ipod to the cord that it came with

  • How Can I Redirect a Webpage in iWeb to Another Link?

    I have created a blog through godaddy.com for my website, and the webpage link is blog.XXXX.com.
    I have a page on my site for a blog, but iWeb defaults to sending people to XXXX.com/blog.html.
    Can someone please tell me how I can have iWeb redirect the link so that when people click on my "Blog" link it directs them to blog.XXXX.com?

    sync your ipad to your itunes, save the book, sync her iPad, sync the book
    same as you would sync a music from your ipod to your iPhone

  • I've received a message that says my message can't be sent.  Unfortunately, the list of recipients is so long I can't see the bottom to click "try another server".  The message won't scroll.  How can I get to the options at the bottom?

    I've received an error messagae that says my message can't be sent.  Unfortunately, the recipient list is so long I can't see the bottom of the error message to click "Try again" or another option.  The message won't scroll.  How can I get to the bottom of the message?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

  • How can i transfer the 'Authorization Group'(SE54) to another client?

    In project i must define an 'Authorization Group' in T-Code SE54---The 3rd radiobutton.
    But there is no message to me to entry the Request NO.?
    How can i transfer the 'Authorization Group' ?
    I konw the date can be show from view 'V_BRG_54' ,but how to transport the data of the view?
    TKS a millon~~

    Hi,
    If your client is set for automatic recording of changes it should prompt for a transport, check there is not another client where you should make config changes.  If not, the menu option Table View -> Transport will let you assign the Auth group to a transport.
    Regards,
    Nick

  • Use DB Connectivity tool, can I know the database is open by another user without opening it?

    hi all,
    A urgent issue here, is it possible for me to know whether the database is being used by the other user without opening a databse using Databae Connectivity Tool?
    Can anyone know the solution?

    Duplicate post: http://forums.ni.com/ni/board/message?board.id=170&message.id=511732

  • Can I redirect the "Help" link in SRM 7.0?

    SRM gurus,
    We are using a recording tool u201CEpilogueu201D to replace the standard SAP help in R3.
    Where can I modify the SRM program to redirect the help link of shopping cart screen to this third party user help URL?
    We are using SRM 7.0.
    Thanks in advance!
    Fisher

    Hi Fisher,
    Please refer to help center of Web Dynpro ABAP applications:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/de/f1429b914148e192f334edc59f2f5d/content.htm
    The related Web Dynpro Complement is u201CWDHC_COMPONENTu201D and the application is u201CPortahc_applicationu201D. 
    Check with your WD Abaper to explore.
    Regards,
    Donald

Maybe you are looking for

  • AC305

    I have been working on the account determination and for the clearing account for revenue from asset sale I ma getting this message that account not allowed to be a balance sheet account. I am thinking the clearing account should be a B/S account. ca

  • Big noise while playing a video, stuck at grey screen

    Hi, I have a Macbook Pro 15inch which I bought in Jan 2012. It came with Mac Lion 10.7. I have regularly updated it as required. Yesterday afternoon while I was watching a video (from my hdd) the screen goes blank but the laptop is still on. I tried

  • ITS Performance and Scalability

    Hi, Can someone point me to documentation or comment on issues related to ITS performance, stability and error-free performance in a production environment. This is with regard to both the standalone ITS 6.20, and the embedded ITS with WAS 6.40 Thank

  • Fonctionnement du trackpad MacBook

    Concernant le trackpad de mon MacBook, la touche en bas à gauche (équivalent de "Enter") ne fonctionne pas. Je dois impérativent utiliser la souris pour lancer des actions... Comment puis-je réparer ?

  • Email account not in valid state

    I tried changing my email password because I didn't remember the old one. Somehow I messed it up at the account validation protocol. I tried to send an email and got a message that my user account is not in valid status. I tried going through the "fo