HT1430 What do i do when all i see is the apple but no slider on or off?

I cant see anything but the apple on a black screeen with no power slider bar

Put your iPhone into recovery mode as described here.  You may have to try to enter recovery mode more than once to succeed.
http://support.apple.com/kb/HT1808

Similar Messages

  • Ipod wont turn on all i see is the apple sign then my ipod shuts off again, how to fix it?

    ipod wont turn on all i see is the apple sign then my ipod shuts off again, how to fix it?

    Connect it to itunes, and see if itunes recoginizes it.
    If not, then hold home and the power button to do a soft reset.
    If not, then you will need to go into recovery mode.
    To get into recovery mode you need to Hold Power + Home at the same time. After it goes blank, continue holding the home button while releasing your finger from the Power Button.
    You should be able to do it. Otherwise, you may need to send your Ipod in for repair.
    NOTE - Using recovery on your Ipod will erase all data and reset all settings.

  • What does it mean when all I see on the screen is a circle with a slash?

    I did a hard shutdown when my MacBookPro was not responding to a Save command,  When I rebooted all I got was a circle with a slash through it in the center of the screen, and the "spinning wheel of death" below it.  What happened??

    Mac OS X: Gray screen appears during startup
    What exact MacBook Pro and what Mac OS X version do you use, since the signature only states the name and the iOS version of your iPhone or iPad?

  • When i plug in the phone, all i see is the apple icon on a blck screen and when i take the charger out its showing that the phone has not been charged...

    when i plug in the phone all i see is the apple icon on a blank screen. when i unplug it, it shows that the phone did not charge and is critical need of charging. what should i do?

    well duh, let it charge. the apple logo means that its turning on

  • I tried reseting my ipod when i turn it back on all you see is the apple icon and a loading symbol how do i fix it ?i tried reseting my ipod when i turn it back on all you see is the apple icon and a loading symbol how do i fix it ?

    i tried reseting my ipod when i turn it back on all you see is the apple icon and a loading symbol how do i fix it ?

    Try here:
    iPhone and iPod touch: Frozen and unresponsive

  • HT5622 What I can do when I want to change the country but I remaining store credit?

    What I can do when I want to change the country but I remaining store credit?

    Click here and ask the iTunes Store staff to zero your account balance.
    (118589)

  • I connected my apple tv2 to my dvi port and all I see is the apple logo

    I connected my Apple TV2 to my dvi port on my HDTV and all I see is the apple logo on the screen. I keep pushing menu on the apple remote and i see a white led turn on and off but the apple logo continues to be the only thing on the screen. I expect to see a menu as the apple manual indicates should appear on the screen. What's it gonna take for the menu to appear and the product to operate as expected?

    Use the search function here to look at DVI problems.  Even IF a HDMI --> DVI cable worked, there still won't be any sound.  Apple doesn't seem to want to make the ATV2 work with anything less than HDMI.  And it's pretty clear on their Apple store that the ONLY output is HDMI.  IF your HDTV has limited HDMI ports, you might want to thing about switching one of your other inputs.

  • Tried Resetting, Now all I see is the APPLE logo and loading

    Ok so here it is....I bought a used original iphone of a friend of mine. On my way home, I decided to reset the iphone to its original settings....now its been like 6 hours....and all I see is the apple logo, then it tries to load and it stays that way....then it blinks and the apple logo comes on again. Is there anything I can do??

    You should put the phone into DFU mode and restore it in iTunes.
    To put your phone in DFU mode:
    1. connect the phone to a computer with iTunes
    2. Hold the home button and sleep/wake button simultaneously for 8 seconds.
    3. Let go of the sleep/wake button and continue holding the home button
    4. If successful a dialog box will appear in iTunes that states that an iPod was detected in recovery mode. The phone's display will remain black.
    5. Click ok in the dialog box, then click restore
    After that the phone should be functional.
    I hope this helps.

  • My ipod touch 4th generation, is stuck on the apple turn-on screen where you turn it on, but all you see is the apple. Any ideas on how to fix this?

    my ipod touch 4th generation, is stuck on the apple turn-on screen where you turn it on, but all you see is the apple. Any ideas on how to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT4623 i failed to update properly update my itouch, now all i see is the apple logo. how to fix it?

    the update to iOS 6.1.5 has been on my itouch for a couple of months so i decided to just go with it without any knowledge on how to properly do it. All i did was delete my apps and thats only because theres nothing special with them. Then i pressed dowload and when i ot past that i installed. i thought i was doing the right thing but now all i see is the blinking apple logo. what shoud i do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                                              

  • My ipad 2 wont start. all i see is the apple and then disappears then reappears but wont load.

    Was listening to pandora and went to skip a song and it shut off. now all i get is the apple logo which fades in and out. I have tried a soft reboot and nothing and itunes wont read it.

    Is the battery charged?
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Iphone won't come on all i see is the apple sign

    iphone wont come on all it does is show the apple sign

    Hello treasy,
    Thank you for providing the details of the issue you are experiencing with your iPhone.
    I recommend following steps 2-6 below for the issue you described:
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on),reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    You can find the full article here:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If you get to step 5, I recommend backing up your iPhone before performing the restore:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Original version of the iPad -- SCREEN WENT BLACK AND ALL I SEE IS THE APPLE NOW.  HOW DO I FIX?

    RE: original version iPAD
    Was having trouble with it shutting down.  Now all I have is a black screen with the Apple in the middle, and it's making a "connection type" sound every few seconds. 
    Any ideas how I can fix this issue?  Thanks for any help.

    Restart, reset, restore, return to Apple.

  • My iPod generation 5 was working fine then it turned it self off and it won't switch on or anything and when I put on charge the apple logo keeps flashing on and off. It

    Lastnight I was just playing away on my iPod and next thing it just went off, it was fully charged and everything. Now it won't come back on and when I plug it into the wall the apple logo just keeps flashing on and off. I have tried to reset it by pressing the on and off button and home button but nothing. How can I get it working again.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • What does it mean when it says "Failed" in the Apple Hardware Test?

    I was checking my diagnostics and i noticed that it said failed in the Apple Hardware Test please help.
    THanks

    Bad memory. Make an appointment at an Apple store, or run this:
    http://www.memtestosx.org/joomla/index.php

Maybe you are looking for

  • How can i set an image to a portal

    how can i set an image to a portal using response.write(); please guide me i have an image in C drive how to get the image

  • Frame Relay Configuration

    All, Sorry for asking this, but I have been beating my head against the wall here. I am getting a T1 installed in my residence for internet connectivity. I am using an old wic-1-dsu-t1-v1 in a 2610 router. I am unable to get this configuration workin

  • BAPI for HR

    which are the bapi available for HR handling or where can I find some documentations about them? thanks Gabriele

  • Accounting Number Format

    Is there a domain or data element that will display negative numbers in parentheses (123) as opposed to the trailing minus sign 123-?

  • How to insert a 2D array into the end of X axis of the initial array?

    Hi, friends, I have a question and look for an advice. I have several input data, each of which has 4 rows and unknow columns. Each time I receive the input, I need to combine it to all of the previous ones by adding it to the end of X axis of the pr