HT1430 what to do if ipod is disabled

What to do if Ipod touch is disabled

Hi there Careyannwithtwins,
You may find the troubleshooting steps in the article below helpful.
iPod touch: Hardware troubleshooting
http://support.apple.com/kb/ts2771
-Griff W. 

Similar Messages

  • What to do if ipod is disable for 22171684 mintues

    i cant seem to get in to my ipod touch

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My Ipod is disable and it tells me to connect to itunes to stop disabling it. What do  I do? How do I connect to Itunes?

    My Ipod is disable and it tells me to connect to itunes to stop disabling it. What do  I do? How do I connect to Itunes?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I was trying to put my password but it is not working. My Ipod touch is showing "Ipod is disabled, connect to Itunes". But I tried to connect but the Itunes tells me that I need the password first to connect.I do not know the password. what should I do?

    I put the password in my Ipod and now I am trying to put it again but it is not working....I tried to connect with the Itunes and it is not working because to the Itunes work with my Ipod, I need the password first, which I do not know. In my Ipod is showing "Ipod is disable, connect to Itunes". I was trying to connect but I can't...what should I do ?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My daughter forgot her passcode, so "iPod is disabled. Connect to iTunes." But iTunes refuses to connect without passcode. Now what?

    My daughter forgot her passcode and tried too many times to remember it, so now her iPod is locked with the message "iPod is disabled. Connect to iTunes." I tried connecting it to iTunes, but iTunes says it could not connect "because it is locked with a passcode. You must enter your passcode on the iPod touch before it can be used with iTunes."
    Question 1: What are we doing wrong? Why does the iPod say to connect to iTunes if it CAN'T be connected to iTunes?
    Some other threads suggest that the only option is to wipe/restore it. The problem is that she has a lot of photos she would like to rescue before erasing it. The Photostream had not been enabled on her computer, so I enabled it. Shortly thereafter, six photos appeared on her computer. But she says there are many, many more and she really wants them. We have waited weeks for more photos to appear, but no more have shown up after the first six. Why not?
    Question 2: Is there anything we can do to coax the iPod to finish sharing the rest of the photos in her Photostream?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. You can't get info off the iPod in its present state
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    All you can to to get the photos is:
    Photos
    - If they are in an iPod backup then restore from that backup. See the restore topic of:
    iOS: How to back up
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer
    - Maybe from the restored iPod via How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html
    iPod recovery software to restore lost music files      
    -iPod touch Deleted Photo Recovery Tips You Should Know

  • My ipod is disabled and i forgot the password and after that i plugged it in itunes and it still wont let me and the buttons arent working so i cant put it in recovery mode so what do i do!!

    my ipod is disabled and i forgot the password and after that i plugged it in itunes and it still wont let me and the buttons arent working so i cant put it in recovery mode so what do i do!!

    Use this program to place the iPod in recovery mode. Then restore.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • My ipod is disabled i put it in recovery mode pluged it in itunes and it keep cutting off and going to the disabled screen what do i do

    my ipod is disabled i put it in recovery and hooked it up to itunes and pushed restore it would start downloading then after a while it cuts off and goes to the disabled screen what do i do to fix this i cant put my password in cause it wont let me
    P.S. i really need help my mom is getting really mad that i cant fix it

    Try placing in DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My iPod says disabled connect to iTunes. So I did and i restored it twice but both times didn't work. What do i do now?

    My iPod says disabled connect to iTunes. So I did and i restored it twice but it didn't work either times. What do i do now?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Did all steps of the restore complete without error? I doubt it.

  • When I tried to unlock my iPod touch which has a passcode, for some reason the passcode I put didn't work and it said 'iPod is disabled. Connect to iTunes.' . And when I did, they said due to my passcode, I couldn't connect to iTunes. What do i do?

         When I tried to unlock my iPod touch which has a passcode lock, it said my iPod is disabled and I needed to connect to iTunes.So when I connected my iPod to my PC, it said that I couldn't connect to my iPod because it has a passcode lock. What do I do now?

    omg the sixth time i did it it worked jeeej
    thank you very much guys <3 xD

  • My daughters Ipod is disabled and it mentions to connect to Itunes. What then? I am stuck and did download Itunes. It says I need to enter the Ipod password? I cant do that because its locked. Help please. Thanks.

    Ipod is disabled and cannot connect to Itunes as it states on the message board. What to do to reset or access? Thank you.

    Restore the iPod in Recovery Mode

  • My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?

    My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • My ipod is disabled and it says connect to itunes. the only way i found to fix it is to restore it but i dont want to loose all my data. what should i do?

    My iPod is disabled and it says connect to iTunes. The only way i found to fix it is to restore it but i don't want to loose all my data. What should i do?

    You must restore it, losing anything you have failed to backup or store on your computer or cloud service.

  • I forgot my password and my ipod says disabled. I tried to plug it into iTunes but my screen says cannot find device because it is locked. What do i do to restore my ipod

    I forgot my password and my ipod says disabled. I tried to plug it into iTunes but my screen says cannot find device because it is locked. What do i do to restore my ipod.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • My ipod is disabled, what do i do?  i cant remember my password

    I changed my pass word and cant remember what it is. now my ipod is disabled.  how do i get it back without eliminating all of my things

    You'll need to connect it to the iTunes library you normally sync it with and restore it.  If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • HT1212 my ipod touch disabled and my p.c not working what do i do

    my ipod touch disabled and my p.c not working what do i do

    Thgen the iPod needs a wifi connection to the internet and yo need another iPod, iPhone or iPad with the FindMyiPhone app. you can also yse any computer too
    Only if:
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    Via USB with any computer with iTunes and an internet connection
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Maybe you are looking for

  • Can we create our own loops? Basic question.

    Hi, Can we create our own loops in Logic Pro. I see in all the tutorials. They are either taking input from external instruments OR use existing apple loops. I have tried FL studio demo to create our own loops. But there is no trial version for Logic

  • Unit of measurement in project system

    Hi Experts, Its relevant to PS module. Base unit of material is KG whereas sales unit is M2 and conversion is maintained between both. Now I am using sale unit (M2) while entering material componenets in project. Then I am raising PR, PO, GR in proje

  • PO document type for third party PO...?

    Hello friends, My client's requirement is that third party PO should have different document type, say ZTRD? I tried to configure the same with PR and PO doc types.  I created new PO type ZTRD. I maintained the combination of PR doc type NB with item

  • IMac 24" and adjusting brightness.

    Hello. I have this fancy (and great) iMac 24". Only annoying thing is that when I try to adjust brightness, it just does not "adjust" brightness. Difference between "none" and "full" brightness is close to nothing. I have so far zap Prams, deleted pr

  • Calling an external URL from cProject

    Hello PPM Experts, We want few of the cProject objects (e.g. checklist items, tasks) to point out to an external web pages (i.e. URL). I guess I need to use "object links" tab for this and define a custom object type (say, ZEXTURL) in the IMG node 'D