HT1430 When Im playing Fast and Furious 6 suddenly the screen is locked and I have to Reset the device, Thanks!

This issue is in the iPad 4

Kadelcn wrote:
Already Restored it. But the result is same. Pls suggest alternate way
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup...  Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

Similar Messages

  • When I complete my information about the creation of the apple Id, the screen show a message I have to find the support of Itunes. Help me

    When I complete my information about the creation of the apple Id, the screen show a message I have to find the support of Itunes. Help me

    Have you done a Disk Repair and a Disk Permissions Repair?
    If that doesn't resolve the problem I would suggest calling customer support about this issue as it is most likely on their (Apple's) end that the problem exists. 

  • How can I unlock my ipod touch?  The screen is locked and has various languages on the sliding bar.  It wont let you touch it

    how can I unlock my ipod touch?  The screen is locked and has various languages on the sliding bar.  the screen is grey and the normal screen saver is gone.

    As a first attempt, try a reboot by holding both the power and home buttons untl the apple logo appears and it restarts, ignoring the red slider if that appears.

  • Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box but no joy, i have tried resetting the iPad but still no joy, have tried different plug sockets, different plugs/cables, help

    Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box that came with it but no joy, i have tried resetting the iPad but still no joy, have tried different mains plug sockets around the house with no joy, I have tried different USB mains plugs but again no joy, I tried using my new iPad cable into the USB port of my MacBook Pro laptop but still no joy, then, I tried using my old iPod classic cable into my MacBook Pro and that worked, so I have a way of charging my new iPad3 but its not practical as i have to take my MacBook Pro everywhere if I want to charge it which kind of defeats the object of having an iPad, has anybody experienced anything similar and how was it fixed? can anybody help me please...

    Grumpy Gator,
    Please note it did say at the store's discretion, but people have actually been able to return it to the on-line store. (I only saw a couple who tried.)
    And given the outcry, I would think Apple might have other Apple stores join in. Just in case, though, if you can, you might bring it in today.
    If it's an ARS, my guess is they can stick to their 14 day return. Apple cannot force them to do it. SO if it's not bought directly from Apple, and it's past the 14 day deal, I'd bring it in to the store today if you have one. When I gave people the cnet.com site, I gave it so people could read it and know only Apple had made the decision for Apple. And I suggested to some that an Apple reseller would probably stick with their own return policy.
    Because Arnie had just bought his, he should be able to return it to Apple or an ARS because an ARS has to have some kind of full refund or at least return for credit within 7 or 14 days of purchase.
    Hope this helps.

  • HT4859 we have a iPod touch 4th gen and the screen is locked and it will let us restore it what now

    we have an ipod touch 4th gen and the screen is locked up and it will not back up or restore. I have removed iTunes and reloaded also iCloud the same we are needing help

    A reset may help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons and await restart. No content will be affected.

  • HT4061 i can not use my i pad as the screen is locked and it shows ipad is disabled

    Dear users i have a problem that i can not open my i pad the screen is locked as i enterd my pass code wrongly many time so
    now it is locked and writting ipad is disabled
    how i can open it again
    thanks

    You will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode in order to reset it : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • Hello, Im trying to update apple tv and on the screen it appears that I have to connect the box to a computer. I did but automatically offers me to restore setting, and even doing that it says it cannot be restore, the light still flashes fast. please

    help

    You have encounter Activation Lock, the antitheft feature of the iPhone. The previous owner did not remove the phone from their account. The phone cannot be used until they do. Return to the store and let them sort this out. It is very unusual for someone to "forget" to disable activation lock, as it is necessary to do so to erase personal information on the phone. So it is quite likely you bought a stolen phone.

  • Firefox is running really slowly, has been doing so for the last week or so, i have tried reseting the cache and deleting the cookies, this hasn't worked, i have the most updated version of firefox on my laptop, any suggestions?

    I have a mac laptop, it is using the most up to date version of firefox 3.6.10

    Please,  run the DirectX diagnostics tool. Go to Windows Start  and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

  • TS2771 my ipod touch is frozen with the apple logo on the screen, won't turn off, have already reset it and it still sits the same...logo on screen.  Can anyone help me out?

    My IPOD TOUCH is frozen with the Apple logo sitting there on the screen.  I have already reset the ipod because it was freezing up so I reset it, but now it won't shut off or got o main screen it just sits with the logo on it.  I can't turn it off.  The screen will also flash as though it will turn off then goes back to the logo screen.  Does anyone know what the heck is going on with my IPOD?  It's reall frustrating me...ALOT!!! 

    - Try:
    iOS: Not responding or does not turn on
    - If not successful, let the battery fully drain. After charging for at least an hour try again
    - If still not successful, time for an appointment at the Genius Bar of an Apple store.

  • Why does my screen turns black and I have to reset the phone to make it work?

    My phone is fully charged when suddenly the screen turns black it doesnt matter if I push the buttons the screen still is black, I have to reset the phone to make it work. When the screen is black and if you call you can hear is ringing but my phone does not sound.
    I had a bad experience with this phone, to tell you the truth I dont even want it anymore, I have other apple products and they are excellent and had worked fine but the iphone is a dissapointment to me.

    Go to an Apple store.

  • Help! Mac won't start. I hear the ding and see the apple logo but the bar below it never goes further than an inch before the screen goes dark. I have tried unplugging.

    Help! Mac won't start. I hear the ding and see the apple logo but the bar below it never goes further than an inch before the screen goes dark. I have tried unplugging.

    Hello Templemeads,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    Have a nice day,
    Mario

  • Why when i play fast H264 LLLL i got an high cpu comsume?

    hi
    i have noticed that with some containers , when i play fast a video LLLL in short i use the jog shuttle controls  i got an high cpu consume %70 or even %80
    for example this mp4 video
    Codec: H264 - MPEG-4 AVC (part 10) (avc1)
    Resolution: 1280x688
    Frame rate: 23.976023
    audio Codec: MPEG AAC Audio (mp4a)
    with others containers i have such issue
    thanks
    i'm running cc under w8.1 pro

    I have searched all over the web too to find any solutions regarding the unavoidable problem of Macs with Adobe's Flash Player. There are little improvements of reducing the high CPU during Flash use on a Mac through changing your main browser to Opera, Camino ... BUT it is still a problem which cannot be solved for now. The following URL is from Adobe's Bug Website and explains exactly what is wrong with Flash on a Mac:
    Very High CPU usage and thus High Fan speed.
    https://bugs.adobe.com/jira/browse/FP-890
    Here's another link to a similar problem in the Apple Discussions:
    http://discussions.apple.com/thread.jspa?messageID=8920577
    And finally the comparison of CPU usage between Mac and Windows which shows very clear that there's obviously something MAJOR not working and Adobe has to fix it!
    http://arstechnica.com/software/news/2008/10/benchmarking-flash-player-10.ars
    It is a shame that this problem is out for years and Adobe is NOT trying to fix it, or at least not as intense as they should. So this is the reason why many people all over the world have to live with their Mac running high fan and a hot CPU when just browsing the internet.

  • What is happening in the most recent keynote when I click on a slide and it pulses (larger-smaller)  Two of my slides have disappeared in the navigator although if I play through them they are there.

    What is happening in the most recent keynote when I click on a slide and it pulses (larger-smaller)  Two of my slides have disappeared in the navigator although if I play through them they are there and the slides have their orignal number--there are just white spaces where the slide should be and I can only get to the slide by clicking through from the prior slide.  How do I get the sldies back into the navigator so I can see them.  Oddly, they are show up just find on the light table. 

    Try removing any transitions or builds on these slides, or delete the slides then recreate them as fresh slides.
    There are many playback anomalies in Keynote 6 which Apple have said they will be  sorting out next year.

  • My computer suddenly refuse to start. When I turn it on it gives the startup sound but the screen is grey and after a while a little folder icon with a question mark inside turns up. It doesn't blink. What to do? Nothing happens if I try to start up from

    As I say my computer, a mac mini refuse to start. When I turn it on it gives the startup sound and the screen turns grey and stay that way for a long time. And in the end a small folder icon with a question mark inside (it doesn't blink) turns up in the middle of the screen.
    I have tried to start up from the installation CD holding down the C key on the keyboard. Same result. I have tried different key combinations while starting up. No result or rather same result. Nothing. Is the computer suddenly dead?
    I was about to buy a new computer but I need access to my data on this one (I write this on an iPad) but hven't yet found a way.
    Anybody have any good advice?
    I thought it was a software problem, that the computer couldn't find the startup software or something and maybe it is, but I am beginning to fear that it could be a hardware problem.

    You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
    https://discussions.apple.com/message/23957654#23957654
    Peace
    Harry

  • Suddenly when I try and log in to the store I enter Apple ID and password and it just says "Unknown Error". If I try again it locks the account and I have to reset the password. Then the same thing happens again. Help!

    Suddenly when I try and log in to the store I enter Apple ID and password and it just says "Unknown Error". If I try again it locks the account and I have to reset the password. Then the same thing happens again. Now reset password several times. Help!

    Launch iTunes. From the menu bar click Store / View My Account
    Click: Edit Payment Information
    Make sure you have the correct Security Code.
    Then click: Done
    And try resetting your Apple ID password.  https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa

Maybe you are looking for

  • NF-e 3.10 - não finaliza o processo de cancelamento

    Olá pessoal. Estamos realizando testes da NF-e 3.10 e estamos com o seguinte problema. Emitimos a NF-e e a mesma retornou com o erro 234 - Rejeicao: IE do destinatario nao vinculada ao CNPJ. Fizemos o processo de cancelamento desta NF-, porém agora a

  • Problems with 990FXA-GD80 and AMD FX8350

    Hello, I built this PC back in March, and ever since I have been having problems with it. I get BSOD every now and then. It usually only happens when I am playing a game or trying to render a video. The last time I tried running Prime95, my computer

  • Development and access to external WSDL URL

    Hi All, I am developing a SOA application with BPEL composite which also makes calls to an external third party webservice. Due to security reasons, the external third party webservice URL is only accessible from our Development server machine (and n

  • Append two structures in an internal table.

    hi,      if i join two tables by innerjoining will it effect the performance?If such,how i can join these with better performance?can i get the data from different tables in a single internal table by appending different structures in this case?Pleas

  • How to reinstall vista in L 305 - S 5919 from recovery partition

    hi, when i take the recovery partition it shows a "system recovery option" dialogue box. but it is not showing any OS in it. so i clicked on "load drivers" which prompts me to select drivers from the installation media. there i can see my prmary hard