HT1438 About how long should an ICloud backup take?

About how long should an ICloud backup take?

Well, it went from 8 to 10 to 12 to 18 to 22 hours...then it stopped and said can't restore from icloud. I guess I'll give itunes a shot.

Similar Messages

  • HT1766 how long should an icloud restore take to an iphone?

    How long should an icloud restore take to an iphone?

    Nobody here would know. Depends on how big the backup file is.

  • HT1176 how long should an initial backup take?

    How long should an initial backup take?

    If the Mac is connected to the Time Capsule using an Ethernet connection, the backup will proceed on average at about 30-35 GB per hour.
    So, if you have 100 GB to backup, the process will be approximately 3 hours.
    Bets are off with a backup using wireless, but it will likely be at least 3-4 times longer than the wired Ethernet connection.

  • HT5262 How long should the icloud back up take?

    How long should the iCloud back up take? I only have 4gb of storage but it has taken almost an hour already with approximately 2 hours remaining. 

    Hi RMaskery14,
    If you are concerned about the time your iCloud backup is taking, you may find the following article helpful:
    My backup is taking a long time to finish.
    Backing up and restoring takes time, especially if you have a lot of data or a slow connection. Depending on the size of your backup and the speed of your network, you may need more time than expected to complete the process. Using a reliable connection when backing up your device is highly recommended.
    iCloud: Troubleshooting creating an iCloud backup
    http://support.apple.com/kb/ts3992
    Regards,
    - Brenden

  • About how long should it take to burn slideshow onto a DVD w/ duo core iMac

    I posted this under in the general forum and rec'd no responses. Perhaps I should have started here....
    Q. About how long should I expect it to take my iMac to convert, then Burn an iPhoto slideshow (comprised of 130 338kb pictures) onto a DVD? I've done this twice (from iPhote, going to Share, then clicking "DVD") and each time it has worked perfectly. However, it seems to take about an hour or more to complete. Is this normal/ expected?? Please understand that this is my first Mac and I've never had a PC w/ a DVD burner, so I'm not sure what to expect. ..I tried running a search for the question but came up empty.
    Thanks!

    I am also doing one right now and it is taking awhile.
    The images are very large though, 1 mb each.
    They look great, but the transfer from iPhoto to iDvd is taking forever.
    Is when your system lags?
    I am topped out with 2gigs of ram and 2.0 ghz intell chip.
    iMac CD 20", 2.0 GhZ, 2.0 Gb ram   Mac OS X (10.4.5)  

  • About how long should it take to process a 1:40m movie in iMovie 11?

    about how long should it take to process a 1:40m movie in iMovie 11?

    Hi
    And the free space avail. on the Start-Up (Macintosh HD) also play an important role.
    For interlaced SD-Video Quality (as on old fat TVs) - I never go less than 25Gb free space (per hour Video)
    For HD - about 4 - 5 times more
    If strange Video-Codecs - that might need lot's of conversions to be used - then multiply with 2 - 3 times more and Hope.
    I make the conversion of raw material first outside iMovie to make things easier.
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround e.g. Energy-Saver
    • Don’t let HD spin down or be turned off (in Energy-Save)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set pointer to this - turns on screen saver - to show that it has nothing to show
    • No File Vault on - Important
    • NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
    • Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
    • Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
    • And let Mac run on Mains - not just on battery
    Yours Bengt W

  • How long should upgrade to Yosemite take?

    I have downloaded Yosemite from the AppStore and on my initial attempt to install got to the point of having a grey screen with apple in the middle and a progress bar which stopped about 1/4th the way to completion.  I let it run overnight after reading posts online indicating that it should resolve itself with time.  After over 12 hours, I restarted the late 2012 MacBook Air and it would immediately go back to the same point in the installation.  I then booted to the recovery disk and restored Maverick from my TimeMachine.  I have tried to install again and have been stuck in the same spot for over 12 hours.  I've tried entering Command-L to observe the log file with no change in what is being displayed.  How long should I wait?

    Install after download seems to take around a half hour.  Of course it will depend on your hardware.
    Phil

  • How long should Loading Installation Information take with a formatted Drive?

    The OS was corrupted when installed over an incompatible 10.6 version of Centrify.  It should have been uninstalled prior to installing Lion, so I was hoping to do a fresh install without restoring anything related to older applications to sort out network hang conditions.  Restoring from Time Machine does not appear to offer selective restore in terms of Apps and Users. 
    I am now waiting for more than hour at a window over the prompt "To set up the installation of Mac OS X 10.7, click Continue" that says:
    To download and restore Mac OS X, your computer's eligibility will be verified with Apple. This just has a throbber spinning in front of the message
    Loading Installation Information... "  I have about 16mbit/sec Internet connectivity, how long should this phase of the reinstall operation take?
    When I first installed Lion, a bootable image of the initial version of Lion was made that was able to restore Lion to an erased drive in about 28 minutes.  It seems that image has been disabled by changes the MacBook boot flash.  Is there a way to be better prepared, and how long should this process take starting with an erased drive?

    Sorry to hear that saga. This time download another Lion installer from MAS by going to purchases and holding the option key. When downloaded it will appear in /Applications. Save it off to several different places on your disk and off.
    Also, consider keeping bootable clones with SuperDuper or CarbonCopy Cloner.
    That way if you have a problem, just boot up from the clone and keep on working until you're ready to fix.

  • How long should my iPad 3 take to charge

    How long should it take my iPad with retina display to charge?  It takes about 15 hours to charge now from being dead.

    FYI
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • HT3805 If I have 500,000 images, how long should a library rebuild take?

    I have close to 500k images and had to do a library rebuild. It took over 10 hours, but never stopped.  Now that it has processes all the photos, it is still saying processing and I'm just waiting.  How long should I wait?

    40 hours.
    Seriously.
    It will finish.
    There's not much else you can do.  If you stop the process, you just have to start over.

  • How long should 3g iphone restore take?

    mine's been going on for 3 hours now and it just keeps saying restoring iphone software, should i be doing something else?

    Once the file has downloaded, it should take about 12 minutes.
    Glor

  • How long should a MacBook Pro take to start up?

    I purchased my MacBook Pro 11 mo ago, at the beginning it would take about 30 secs to start up, now it takes almost a minute (the same as my old Dell computer) the only program I have installed is Microsoft office, the mac computers at work take about 30 secs to start up.
    I probably don't have more than 10 word files in "my documents" and no more than 500 photos, which I think is nothing compared to ALL the information I have in the computer at work
    is it normal to take 1 minute to start up? What should I do in order to make the start up faster?
    It annoys me that it takes almost the same as my old Dell computer
    Thanks

    Mountain Lion has a annoying feature it loads the last used programs when you log in.
    So disable that, there are various hacks on this thread
    https://discussions.apple.com/thread/3244852?start=30&tstart=0
    See if that improves your boot time and if not, then do the #12/#13 OnyC cache cleaning routine here and reboot when finished.
    ..Step by Step to fix your Mac
    If that doesn't solve it, investigate your Office verison is compatible with your OS X version
    http://roaringapps.com/apps:table
    Uninstall it and see if the boot time resumes normally, or update it or run further through the Steps.
    Why is my computer slow?
    The Mac's at work, are they running 10.7 or later? Or the fast and speedy 10.6

  • How long should the new iTunes take to download?

    It's been 10 minutes and the little "green line" is still at the start.

    If your profile information is correct, post to the Tiger forums. If not, update it and provide more details, such as which Update are you trying to install, whether or not you have a bootable backup/clone of your boot volume before trying to update, etc.

  • How long should a software update take - it's been over 2 hours!

    An update alert appeared on our screen today. We clicked to update, but that was over 2 hours ago. What should we expect for length of time to download the update or what should we do if the update is not downloading correctly?

    If you have a problem with updating then download the full version.
    * Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install.
    * Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • How long should this iTunes restore take?? Grrrr

    Upgrading my iPhone 4 to the new software.
    Took over an hour as it was "preparing to restore the software on this iPhone".
    Finally, it changed, to read "iTunes is currently restoring the software on on this iPhone". This has been going on for almost TWO HOURS.
    There's no status graphic to show how far it's gotten so I'm stumped.
    Is this normal??? I need to use my phone and it's been out of commission for hours. Grrrr
    Thanks in advance.

    No it would take at most 2 hour, I think your iPod hardisk is dying causing the delay and iTunes freeze.
    Do a check on the iPod Hardisk using Disk Diagnostic as posted earlier by tt2
    https://discussions.apple.com/message/17776595#17776595
    This will not fix your problem directly, but may save you a lot of frustrations, as it help us in troubleshooting.
    Have a nice day!

Maybe you are looking for

  • Event flow in ABAP is different when executed via SE80 vs. via TCODE

    Hi, We have many existing custom ABAP report pgms that have a custom transaction code that executes them.  Regardless of how the pgms are invoked, the event sequence in the pgm is INITIALIZATION, AT SELECTION-SCREEN, START-OF-SELECTION. etc.  Now, wh

  • PO output type.

    Hi, I am trying to send a PO through EDI but I get a status of yellow. I tried to repeat output for a successfully sent PO but even that gave a status of yellow. I went to NACE to see the config but everything seems to be alright. Can't figure out th

  • Mapping Identical Source GL Account to Idential Target Essbase Account

    Is there a way to use a rules to map a source GL account to a target essbase account that are both identical? If so, can someone please provide some guildence. I tried looking at the fdm admin guide, but have not come up to a solution. Thanks, Trung

  • Can I use voice recognition to fill in an existing template?

    Is there a way to use voice recognition to fill in blanks on an existing (self-prepared) form?  Can I prepare the blanks on the form in a way (e.g., tabs) that lets me use voice commands to move the cursor from blank to blank?  Imagine a simple list

  • Technical names of column shown after POWL_D01

    Hi After we have executed POWL_D01 all column for the Queries are shown with technical names. After first load the column description comes correctly in. Does anyone know a report or somehow we can update this before the business user takes in use? W