HT1438 I did a master reset on my iphone4 the apple sign poped up and now for the last hour there is just a spinning icon as if something's loading
I did a master reset on my iphone4 the apple sign poped up and now for the last hour there is just a spinning icon as if something's loading helpp
DFU Mode Restore
Open iTunes on computer. Connect iPhone to computer with USB Cable. Then hold both home and power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds of holding Home button. If the screen is black this is DFU Mode. Then click Restore button of iTunes.
Similar Messages
-
Can anyone tell me what to do my ipad 2 is frozen reset but will not come on seem the apple logo which disappeared and now is frozen
I really can't tell from your post but did you try rebooting the iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
My computer struggles to log in. I have to shut it down each time the computer has been shut and asleep for a few hours. The first day it happened my desktop photo was reset.
Have you tried a PRAM reset?
http://support.apple.com/kb/HT1379
Ciao. -
I have an original Apple ID from my personal iPhone and iPad. I bought a MacBook Pro for business and the Apple Store clerk told me to use the old Apple ID to make setup faster and that I could change to a new one later. So... I did all that and changed the Apple ID everywhere I can find a place to do so. And everything seems okay, except the Automatic Updates download tool defaults back to my original Apple ID. That old Apple ID is grayed out in the login, so I cannot seem to change it to download and update under my new, business-related Apple ID for my MacBook Pro. What to do?
Yes, absolutely, you can still use the old ID to update, etc., but I understood the OP to want to simply discard the old one and use only the new one. Maybe I misunderstood...
And, actually just now re-reading the first post, it could be that the ID had only been associated with the iDevices, so if he established a new ID and associated that with the new MBP, I frankly have no idea if he can still use the old ID on that machine (based on him saying that the old ID is greyed out) - have not come up with this type of situation before. -
I have reset my ipod touch 3rd generation and after doing so it is frozen with an apple in the middle of the screen and i have already tried the apple support page steps and still doesnt fix it, please help me out
The warranty does not cover accidental damage like that cased by dropping the iPod. However, Apple has known to make acceptions. Make an appointment at the Genius Bar of an Apple store. Otherwise Apple will exchange your iPod for a refurbished one for $99
-
Did some updates yesterday so decided to shut down my computer last night. This morning when I turned if back on it came up with a grey screen and a white box with a picture of the computer that says "setting up your Mac". It's been like this for an hour. The display box shows three check marks but it won't do anything. It's like its in a frozen mode
http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
also use the Command-L to view logs during installation -
After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a message that our trial that will expire in 10 days (in the middle of an upcoming charity event). Is there any way to reactivate CS6? Is the only option to delete all CS programs? Can we download CS6 again with the same product key?
In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
i did a master reset on my sprint iphone 4 and i do not know what steps to take to get the phone to where i can connect to wifi after putting in the language and country... please help
Connect it to your computer via the supplied sync cable and restore.
-
got a question for all you peeps
dos anyone know about i phones i have a i phone 3gs which i got unlocked i did a master reset or summin and just had a pic of apple so i plugged it in i tunes downloaded and it now says no service at the top of phone and i tunes says invalid sim i put the correct sim in it used to be locked too and still says same pls any one with ideas?hi sorry what happoned is that ages ago i brought a i phone 3gs on 02 network i went to a sml phone shop and payed for them to unlock it. it has been fine till yesterday when i went to reset it from the phone it then turned off and came back on just just an image of a apple for about an hour so i connected to i tunes and it said downloading software after another hr it had finished but then i tunes said in had to insert a sim so i had to un plug the phone from laptop while i did this i put my orange sim in and the i phone said where do i live and had to connect to a internet connection but all the time saying no service where the signal bar is and then says activating i phone it took a few min and said couldnt finish it bec of the signal and to connect it to i tunes to do it so i connected it to itunes and i tunes just keeps saying invalid sim so i took my orange sim out and put a 02 sim in and is still saying invalid sim on itunes?
-
I had to do a master reset on my iPhone4, I had everything backed up on iCloud first. The only thing I cannot figure out how to get back is my pics, how do I do that?
On the iPhone tap Settings > iCloud
Switch Photo Stream off then back on then restart the iPhone.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears. -
I "Erased all content and settings" and now my iTunes does not recognize my iPhone when I plug it in. Plus my iPhone is stuck with the apple symbol on it and wont do anything. what did I do? How do I get my phone to work again?
Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually takes about 10 seconds time. If still problem. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware.
-
my kids entered the passcode several times wrong and now it is disabled and written on it"connect to itunes" , when i did connect it to itunes it said "can not connect to ipad because it is locked with a passcode" what can i do pls?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it.
If you do it via a different computer that it's not normally synced to then (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
I bought my 6 plus last night decided to upgrade the IOS 8 like they suggest and now all I see is a white screen with the apple sign in the middle with an occasional flashing red screen. Did my new phone seriously just crash? What do I do now? I left it overnight with the white screen, thinking maybe it'll go away and needs time to upgrade. Woke up this morning, nope still white screen. Very disappointed with Apple. I was so excited to get my phone and can't even use it right now.
First turn the iPhone off and back on and see if it works. If that doesn't work then do a Reset by holding the Sleep / Wake Button (The Power Button) and the Home Button at the same time until the white Apple Logo appears, the release both Buttons and wait until a Full Reset occurs. The iPhone 6 should come back to your Lock-Screen. If that doesn't work then you could connect the iPhone 6 via the Lightning Cable to a Computer with a Current Version of iTunes. Then open iTunes on the Computer and wait until your see a Button that represents your attached iPhone and click on it. This should bring up a Summary Screen on the Computer within iTunes. At that point your can choose Update Software if an Update is available or Restore the iPhone to Factory Settings / New In The Box, or you could try to Restore from your Backup if a current Backup had already been saved from a previous iPhone.
If you don't have a computer with iTunes and you can get the iPhone back on, then go to Settings>General>Software Update and see if the iPhone is still on iOS 8.0 or if it is now on iOS 8.0.2 -
so i bough an ipod touch 5th gen from a friend i went to the settings and tried to factory reset it the ipod...so i hit erase ipod then it went dark..then showed the apple sign and a line under it...but thats it it has had that on the screen for 2 days it wont connect to itunes and i did the rebot thing with the power and home button and it still wont do anything i need help please
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?
You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.
Maybe you are looking for
-
Combine functionality Batch Create Multiple files and Set Security
Greetings, Is there any way to combine the functionality of Acrobat Pro's "Batch Create Multiple Files" (File (drop down) -> Create PDF -> Batch Create Multiple Files-) and running a batch process (Advanced -> Document Processing -> Batch Processing
-
IFrame like effect in Flash (AS)
Hello friends, good afternoon! Some time ago I seek a solution to a difficult problem to solve. The situation is as follows: need to generate a SWF with a frame (element) of 800x600px websites that pull my choice. In HTML it is easy to do with the IF
-
Form bad value when opening CFL in system forms
Hi, I have a UDF control on the Stock Transfer Form which opens a CFL. Now at the CFL event, when i try to set the value from the CFL to the Parent Form (Stock Transfer). It opens the CFL again with "Form - Bad Value" error. This case i had faced but
-
Guides (Presets and Snap To) in v5?
Hi. I just received PSE5 yesterday - looks great! I see that they added Guide Presets under the View menu, and then Snap To includes Guides. However, Guide Presets is always grayed out, and there doesn't seem to be any difference at all when I turn o
-
Why cant my voice be heard to people i call
when i make a call, i can hear the person speak but they cant hear me. Whats gone wrong and how can i fix? thanks