HT1438 my iphone 4 just won't power up, it was half battery when it shut down, have tried charging or connect with my MacBook still nothing happen?
my iphone 4 just won't power up, it had half battery when it power off, tried connecting to my Macbook still nothing happen, what's the reason?
Try holding both the on and off buttons(top and bottom of phone) at the same time and keep holding until the apple sign comes up then let go and wait, worth a try.
Similar Messages
-
my iphone 4 has switched off by itself and won't switch back on. The battery wasn't dead, I have tried restarting it and have tried to put it into recovery mode but it still won't switch back on?
Try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
-
the iphone 5c still has problems with battery life and shuts down after complete charge. this happened after 8.1 update, I tried every way to shut things down, still no luck. what can I do next?
I did a soft reset, and I went to the discussion and turned every down or off. This is definitely a hardware problem.
If you are inquiring about a mortgage application, please click the questionnaire below to begin the process!
Mortgage Questionnaire<https://webapp.mortgagenetwork.com/BorrowerSite/ManageData1003/StartProcess.aspx ?LO=29015>
Tom Burke
Loan Officer NMLS #460277
Mortgage Network Inc.
Corporate NMLS#2668
570-961-5174 direct
570-313-7366 cell
Efax 855-795-7084
[email protected]<mailto:[email protected]>
www.TomBurkeLoans.com
2004 Eberhart Rd
Whitehall PA 18052
Licensed by the PA dept of Banking and Securities -
My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!
Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace -
Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...I tried every feasible command and all i got was some more white lol.I dont have my tools to open the case right now but do you guys think my cpu board is done?
Have a look at this help document for suggestions that you haven't tried yet:
http://support.apple.com/kb/TS2570 -
Help!!! Been close to 3 hrs now
Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
Help!
Hi,
Mac OS: Long Delay Before Web Pages Start to Load, Then Load Suddenly at Normal Speed
*I tried entering a manual DNS*
If you have not tried Open DNS, go here. Open DNS
Just click the computer icon and follow the instructions.
Empty the Cache. To empty the cache memory go to the Safari menu and click 'Empty Cache
Reset Safari go to the Safari menu and click 'Reset Safari.. select the first 5 buttons and click Reset.
To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/Icons and delete its contents.
Carolyn
Message was edited by: Carolyn Samit -
phone 4 just turned itself off, won't turn on again - sleep/wake button hasn't worked for a while - tried charging (even though it was 50% charged when it shut down) and that makes no difference....either via usb to computer and direct to wall socket. Any suggestions...other than heading off to the genius bar tomorrow?
Well, the sleep/wake button is also the power button. If you cannot use it to turn on, then you cannot use it to perform a reset by holding it and the home button together until you see the Apple logo.Those are the only two ways to turn the device on. You can try letting the battery go completely dead and then trying to plug it in. After it has charged for 20-30 minutes, the device may come back on. But, without the sleep/wake button, there is no other way to turn the device on or off.
-
About 45 minutes ago my iphone 5S just shut off on its own. I have tried charging it only to have the white screen with the black apple showing. How can this be repaired?
Keep it plugged in and do a reboot by holding both the power and home buttons until the apple logo appears, ignoring he red slider if that appears.
-
Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???
Problem solved... just saw the answer in another thread... https://discussions.apple.com/message/13110222#13110222
-
I WAS USING IPHOTO AND THE POWER WENT OUT. WHEN I TURNED IMAC BACK ON IPHOTO WOULD NOT OPEN, JUST KEPT ASKING TO RELAUNCH. NOTHING HAPPENS WHEN I RELAUNCH. I TRIED PUTTING THE RECOVERING DISCS IN BUT STILL WON'T OPEN!
It also broke your cap lock. You need to get your keyboard fixed as it makes reading your posts extremely difficult and is considered shouting which is rude
You need to load your back up or make a temp backup and rebuild your library
LN -
I have an iPhone 4s just eight months, it is normal that the battery lasts only 3 hours? please help me thank you very much.
Three hours if definitely NOT normal. I get at least 48 hours out my 2 year old iPhone 4S' battery with light usage. Did you do the iOS 7 update on the phone it self (OTA) or through iTunes? In my experience most problems are caused by the OTA updates. For this reason I ALWAYS update using iTunes on my computer.
I would suggest restoring your phone using iTunes on your computer and setting it us as a new phone. This downloads a fresh copy of iOS 7.1 from Apple and installs it on your phone. Just make sure that you transfer all purchased items (apps, music, etc.) as well as photos to your computer before restoring as the restore will completely wipe your phone. Do not restore from a back-up. Yes, you will loose all your data on the phone but restoring a back-up can restore the problem you are currently having back to your phone. Once your phone has been restored you can manually sync back your apps and music.
Before restoring you can also check to see that battery-killers like Location Services, Background App Refresh, etc are only turned on for the apps that really need it. I recently read and article that said that the Facebook app can be a real battery killer. If you have this app installed turn of location services and background app refresh for this app and see if that helps. Also go to Settings / General / Restrictions / Location Services / System Services and turn off all the options in that menu. Your phone does not need any of those to function. Constantly using your phone's GPS is a huge battery killer. I only have Location Services enabled for Find my iPhone and Background App Refresh is turned off completely.
I hope this helps. -
i just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing. when i try to just select my number to send and recieve imessages from it will not show up. i can send and recieve regular text but not pictures or imessage. i have tried logging off and restarting and nothing has worked.help please!!
Did you remove your account information from the other person's iPhone?
-
My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My i-Pad won't charge after I downloaded some stuff from i-Tunes. I have tried charging through two computers and using the wall socket,, with different cables. I have turned the i-Pad off & on a couple of times but it still won't charge. Any ideas will be gratefully received.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom
Maybe you are looking for
-
Trusted RFC - TRUSTING_SYSTEM@P11and SM_P11CLNT040_TRUSTED
Dear SAP colleagues, From SAP Solution Manager, I want to connect a satellite system (P11). I have currently 2 Trusted RFC : 1. TRUSTING_SYSTEM@P11 2. SM_P11CLNT040_TRUSTED generated from SMSY. I am currently re-checking all RFC of SOLMAN and I am wo
-
HT1430 my iphone 5 says activation error i cant uyse it restore or back it up
help
-
Upgrading from BPC MS version to Netweaver version 7.5
Hi experts My client is in the process of implementing the MS version of BPC but have now invested heavily in the Netweaver environment and would like to migrate to the NW version 7.5 of BPC. Please can I get some views on the complexity involved in
-
Navigational Attributes as Selection Criteria in Infopackage?
Is it possible to use navigational attributes as selection criteria in the infopackage? I have the MRP cube that only does full loads. I would like to ONLY load the material type FERT (finished goods). 0MATERIAL has 0MATL_TYPE as a navigational at
-
File sizes grow too fast when asset added
When I add a 125 Mb mp4 file to my menu in DVD Studio Pro, the size of the file as indicated by the green guide at the top goes from 3.4 Gb, to 5.4 Gb. Any idea why a 125 Mb .mp4 file would cause the DVD to get so big so fast?