HT1438 will my ipad 2 update this summer with the new update

Can/will my IPad 2 update this summer with the new apple update?

The iPad 2 can be updated to IOS 7.1 now.

Similar Messages

HT1688 I tried to update my iPhone 5 this morning with the new software update and now it won't turn on. When I plug into my itunes account, it says my phone is in recovery mode. Was working perfectly prior to the attempt to update. How do I fix this?

I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?

Zach Doody wrote:
itunes says i cannot update the phone as it is in recovery mode.
That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
Restore it. You don't have a choice at this point.

Will my LED 27 Cinema Display work with the new Mac Pro?

Will my LED 27 Cinema Display work with the new Mac Pro?

Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

I presently use an older AirPort Extreme but my reception comes & goes does this occur with the new extreme?

I presently use an older AirPort Extreme but my reception comes & goes. Does this occur with the newer version?

1) If the reception comes and goes as a result of wireless interference from other sources in your home and around the home...other wireless networks in the neighborhood....or...nearby cordless phones.....then a new router is likely to experience the same issues. See this Apple support document for symptoms and fixes of wireless interference.
http://support.apple.com/kb/HT1365
2) If the reception comes and goes as a result of an aging power supply in the older AirPort Exteme or another component that is intermittently acting up, then a new router should take care of that.
What we cannot tell you is whether 1) or 2) applies to your situation. If possible, it would be good idea to take the older AirPort to an Apple Store or Apple Servicer....if you have one near you....to let them take a look.

Will LR5 benefit of graphic cards acceleration with the new MacPro ?

Will LR5 benefit of graphic cards acceleration with the new MacPro ?

Well, although LR5 is a great improvement of speed, the dev. team should try to work on MF files such as from the Pentax 645D… any speed improvement would be much appreciated, especially with dust removal and masking tools.
My actual configuration is not so bad, but I can't see how to get more speed from it :
MacPro 2 x 2,8 GHz Quad-Core Intel Xeon
RAM 18 Gb 800 MHz DDR2 FB-DIMM (2x1 + 2x2 + 2x3 + 2x4)
Mac OS X 10.9.1
ATI Radeon HD 2600 XT
ATI Radeon HD 5870 1024 MB
SSD Boot disk: SAMSUNG MMDOE56G5MXP-0VB - 256 Gb
Working Disk : 2 x Western Digital 3,5´´ S-ATA III 6 Gb/s Disque dur Caviar Green (WD30EZRX) - 7200 RPM, 64 Mo - Mounted RAID 0 - 6 Tb

Has anyone noticed their iPad is slower and freezes with the new IOS 7 upgrade

Is anyone having problems with your iPad freezing with the new operating system

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Does anyone else have this problem with the new up...

in order for me to dial or use the keypad, i have to press the end key before dialing any numbers and then to remove the numbers and the dialing bar, i have to clear all the numbers manually by press the C button then i can press the end key to take off the dialing bar. another problem i have is that when i put my profile on silent, the phone doesn't vibrate the screen and lights only flash like they normally do. has anyone else had this problem? im guessing there are more flaws with the new update but im still looking into it.

someone help meee!!!

Will HH(Black) BB Talk Phone work with the new AD...

Hi
hopefully moving over tomorrow to the new up to 20Mb connection.. question is ..will the HH phone work with the new router that Bt have sent out for the new connection ? Doesn't appear to be anywhere to connect to the new router like the HH which you can connect it to on the front .. so can it connect wirelessly using the power adapter ??

None of the BT HH phones will work with the 2700HGV.
You will need to get a standard wired or wireless phone and connect it to the phone port on the 2700HGV with the included adaptor, then activate BBTalk on the 2700 HGV. Here's the link to the activation help:
http://bt.custhelp.com/cgi-bin/bt.cfg/php/enduser/cci/bt_adp.php?p_sid=z_6Y-FXj&p_faqid=9916&cat_lvl...

Will my airport express 802.11d interface with the new 802.11n for music streaming?

I am about tho purchase the new airport express and have the old one running in the house already. The reason for the purchase is to stream music to speakers in the house. The older one is dedicated to the modem and provides wifi, the new ones will be plugged in elsewhere. Should I replace the old one or keep it?

Welcome back!
If by "older" AirPort Express, you mean it is a "b/g" version, you'll have to use the WDS setup options on both the new AirPort Extreme"n" and the AirPort Express.
Unfortunately, two negative things will occur when you setup WDS:
1) Because WDS is a "g" technology thing, the entire wireless network will drop down to "g" wireless levels. So, you lose any advantages of "n" speeds with your new router.
2) The bandwidth on the entire wireless network will be cut 50%.
Bottom line, you will have a "g" wireless network operating at half of it's capability. That's a tremendous loss of performance for a bit more wireless coverage, but you may disagree.
WDS is difficult for most users to set up because it is very easy to make a mistake. Look over this post to get an idea of what is involved with this. There is also a link to Apple's instructions in this post, but the step by step by expert user Tesserax is easier to follow.
http://discussions.apple.com/thread.jspa?threadID=2287950&tstart=0
I do not recommend WDS, but it's your call.

HT5622 looking to take off my photo's off my phone and store them on my computer, how does this work with the new update on a iphone 3g

trying to take photos off my 3G since the upgrade,,, I am not seeing the popup to take photo's off and store them on my computer

thanks folks, I quessed i could do it this way.. Usually the window pops up to transfer the pictures...
THANKS FOR ALL OF YOUR HELP!!!!!!!!!!!!!!!!!

I have a 24 bit external DAC/ Amplifier connected to the optical output on my new iMac. I just upgraded to Yosemite and noticed instead of 96000 hz output it has gone down to 41000hz and won't allow me to adjust this anymore with the new OS upgrade.

Hi as stated above, when i updated my OS system to Yosemite, i am no longer able to select audio quality above 41000hz. how can i fix this? ps i am connected to an external dad through optical which supports unto 96000hz.

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

I have been unable to set up my iPad to use automatic download with the new iTunes release. I tried turning them on in the settings area but when I click on it immediately returns back to off

I have been unable to turn on automatic download on my iPad 2

I have been unable to turn on automatic download on my iPad 2
It could be your geographical location.
"Automatic Downloads is currently available in the US, Australia, Canada, Cypress, France, Ireland, Luxembourg, Malta, Mexico, New Zealand, Spain, and UK."
From here > iTunes Store: How to enable Automatic Downloads

Re: Using this site with the new IE9...

Apparently one needs to activate the compatability mode to be able to use this discussion forum correctly. A click on the little "torn page" symbol to the right of the url address/search bar is needed.
Hope this is not considered too off-topic.

Sorry, I didn't see a section for Ableton's Live software
That's because this is an Apple forum, not an Ableton one.
You have a PPC version of Live. The first Universal Binary version of Live was 5.2 - this contains Intel code for your Macbook.
You are currently running the PPC version under emulation (ie sloooow).
You need to upgrade Live to *at least* 5.2 to use Live natively on an Intel Mac.

Will any of my old displays work with the new Mac Mini

I am thinking of getting a new Mac Mini.     What I need to know is if any of the monitor/displays I have here can bem used.
I have two old video monitors I used to used with my old mac mini (Samsung Symc Master 770 and old little Princeton - VL158) , a
n early 2006 iMac 20" (which I don't think I could use as a monitor from what I read) and an little Samsung TV with USB and HDMI connectors.,
Can I use any of these?
Need new connector cords?   Mini-DVI to VGA adapter?
Thanks

I am a writer though and a photographer (strictly point and shoot) for a couple of orgs. I just don't want o run out of space. And I hate!! slow response time.
Is the i5 adequate as well?
Glad to have found an Apple guru so quickly. May very well buc you more in the future.

I am getting a new computer: what do I need to backup onto an external hard drive so that I will be able to sync the ipad with the new computer without losing anything?

I am getting a new computer and need to be sure to back things up from the old computer in order to put everything onto the new computer. I know that itunes music I have uploaded from cd's will not sync from ipad to new computer, but what else should I be aware I will lose when I move to sync with the new computer?

IMHO the best solution is to clone your disk. That will give you a copy of everything. You can do that with either SuperDuper or CCC.
Allan

HT1438 will my ipad 2 update this summer with the new update

Similar Messages

Maybe you are looking for