HT1443 Can I install or purchase a new OS system?

I am looking to upgrade my OS is that possible?  Can I purchase a newer version because it wont let me download one?

Go to the  menu/About this Mac and it will show you the memory installed.
Check to make sure your applications are compatible. PowerPC applications are no longer supported.      
Application Compatibility
You can also check which applications are PowerPC by going to the  menu, select About this Mac, click on More info…, then click System Report and select Software/Applications.
If you have applications that you want to use that aren’t compatible, you can retain Snow Leopard and create a new partition to install Mountain Lion on or you can run Snow Leopard  server in a virtual mode.
There are updates for iWork and iLife progams which are compatible.
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.  You can make a bootable DVD/USB stick to install using this free program.
Bootable USB Flash Drive – Diskmaker X
If you need/want more RAM, the 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM serveral times from Other World Computing and have always been very satisfied with the product and service.
Crucial
Other World Computing

Similar Messages

  • How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work

    How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work in CC.

    Your key cannot work in CC, it's newer version, and would require a new purchase.
    Downlaod CS5 here.
    Download CS5 products

  • How can I install logic 9 on new mac 10.8

    how can I install logic 9 on new macBook pro 10.8?
    My Cd rom shows Logic 7 and on the old mashine (MacBook white 10.6) I have Logic pro 9.
    My MacBook pro 10.8 does't accept the Cd Rom...
    Regards
    Paul

    Kerrse,
    ...and it's content?
    While your method will get the app itself across.. the content will present a possible problem, though once it is updated to 9.1.8 the OP could try the "in menu' option to download content but the essential stuff normally gets installed from the DVDs initially with LP9 Boxed set... so it may not be as easy as simply copying across the app only.
    However, worth giving a try.....

  • I can not  install apps in my new ipod touch ios 6

    i can not  install apps in my new ipod touch ios 6
    it is showing appication is failed to installed
    why is this happening
    can any one help me....

    The problem is when i drag n drop downloaded apps from torrentz into itunes n syncronize it add those apps into my itouch ... but the message shown in my i touch is .. that application failed to install..
    in the itunes those appliacations are unchecked automatically ... but i can install apps which are downloaded from the istore .... they are working properly
    but the ones i downloaded from the torrentz are not getting installed..

  • I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    Oliver,
    Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
    Here is some help on activation if this is the issue:
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Pattie

  • I want to install my original SnowLeopard (from the installation disc) to a partition I created in the now upgraded Mavericks OSX, How can I install it on the new partition?

    I want to install my original SnowLeopard (from the installation disc) to a partition I created in the now upgraded Mavericks OSX, How can I install it on the new partition?

    That's easy.
    2 methods:
    1. Change the Startup Disk in System Preferences, then restart:
    2. Hold down the "Option" key while starting or restarting the Mac. Then chosse the partition that you want to startup from.
    The 1st mehtod is the quickest, because you don't have the additional step of choosing the drive. Plus, whatever you have selected in System Preferences becomes the default startup drive.

  • Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"

    Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"

    Have you completed all windows update including service Pack1?  If not, please complete all the windows update then follow steps below to re-install all over.
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime  
    Apple Software Update  
    Apple Mobile Device Support  
    Bonjour  
    Apple Application Support
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • I can't install my purchased Photoshop CS6 in my window based laptop. how i will detect the problem

    I can't install my purchased Photoshop CS6, how i will detect the problem

    Hi siba1966 ,
    can you be more specific? Double-click the Setup file, after installation you enter your Adobe Id ...At what point in the process crashes?

  • Can i install bootcamp on the new iMac late 2012 "27"?

    can i install bootcamp on the new iMac late 2012 "27" without fushion drive?

    You have two possibilities:
    1. Buy the USB SuperDrive and install Windows from a disc.
    2. Use an USB drive with the Windows 7 installer inside.
    Boot Camp isn't compatible with Windows 8, so you will have to wait. Also, the Late 2012 is only compatible with the 64-bit Windows 7 edition

  • I can't install my purchased apps from App Store

    I can't install my purchased apps from App Store on iPad. I push the Install button, but nothings happen.. Any advice?

    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.
    3. Try App Store again

  • Can I install Tiger in my NEW 21.5" iMac ?

    Can I install Tiger on my NEW 21.5" iMac ?
    Machine bought new - Nov. '09.
    While I do like some of the features in Snow Leopard... almost all my existing software plus the Sims 2
    games will apparently NOT run (or run well).

    Rosetta does exactly that. It was created to run MacOS X programs that only ran on PPC macs to run on intel processors. Rosetta would translate PPC machine instructions into intel instrucions on-the fly.
    Classic Mode was a whole separate operating system. Rosetta merely translates PPC to intel so it is generally invisible to the user.
    I have used Quicken '05, iMovie HD, AppleWorks and Microsoft Office under Rosetta with no issues. Photoshop 7 was the only program I have that choked and would not run. I would guess that the Sims program would be most likely to not run. They might have an intel update available, I know that Zoo tycoon 2 had a patch to allow for intel processers, The Sims might, too.
    Some programs have "fat binaries" with both versions. If you are curious, you can see whether you are running intel or PPC-translated by using the activity monitor.
    You don't need to run Rosetta separately, if it is needed it turns itself on, so the programs install normally. In fact, some programs needed Rosetta just to run the installer, the actual software ran on the intels.
    I think I have the same machine as you, I just bought my new 21.5" iMac last month. I love it by they way, a DVD that would have taken all night to burn was done in a little over an hour!

  • Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

    Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

    The latest version of iPhoto which can operation with OS X 10.4.11 is iPhoto 7 which is part of iLife 08.  You might be able to find a copy of iLIfe 08 on Amazon.com or Ebay.com.
    iLife 08's full system requirements are:
    Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
    iMovie ’08 requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0 GHz or faster), or an iMac G5 (1.9 GHz or faster)
    iDVD ’08 requires 733MHz or faster processor
    512 MB of RAM; 1 GB recommended; high-definition video requires at least 1 GB of RAM
    3 GB of available disk space
    DVD drive required for installation
    From: http://support.apple.com/kb/HT1010
    OT

  • Can i install oracle9i on a stand-alone system

    Can i install oracle9i on a stand-alone system or does it need a server/client nodes and software?

    Yes,
    You can Insall Personal Edition of Oracle 9i. But this you have install from Server Edition CD only.
    W/R
    Vaj.

  • HT1443 Can i install the new os x Lion Mountain on my Os X 10.5 Version ?

    Can i install the new os x Lion Mountain on my Os X 10.5 Version ?
    Thank you for your answer
    Diana

    Hi,
    For installing OSX lion you need to check the following,
    Regards
    Freddy

  • How can I install Aperture on my new Macbook Pro. I am up to date with my Mac Pro, I have the Aperture 1 and installation disks but cant remember how I got to 3. Can anyone help?  Many thanks regards Alf

    I have an up to date version of Aperture on my Mac Pro, and I would like to install it on my new Mac book Pro. I have the original installation disks for Aperture 1 and 2. I cant remember how I got to Aperture 3, I think it was via a web download but not sure. I have checked my purchases in the App Store but there is no indication of me buying an upgrade to Aperture 3.
    Ive tried to download it from the App Store but it wants me to pay again.
    Can anyone help on how to install Aperture 3 on my new Macbook .
    Many thanks regards  Alf

    Then you can download the Trial version of Aperture 3 and unlock it with your serial numbers - you will need all three for all three versions: A current link to the Trial version is in this support document, also instructions on how to reinstall on different systems:
    Aperture 3.4: May quit unexpectedly on launch after updating
    Regards
    Léonie
    BTW: Your Aperture 3 serial number will be displayed in the "About" panel - the panel you see, when you use the command "About Aperture" from the Aperture menu in the main menu bar.

Maybe you are looking for