HT1444 How can I get OS X Mountain Lion if I have an iMac Mac OS X 10.5.8 (9L31a) ?

How can I get the OS X Mountain Lion if I have an iMac Mac OS X 10.5.8 (9L31a) ? Or I need to buy a new computer???

Depending on which model of iMac you have, you may be able to get it by going through Mac OS X 10.6(phone the Apple Store), or you may need to buy a newer computer.
(69288)

Similar Messages

  • I installed Maverick It turns off for no reasons, makes Safari a miserable experience, and more.  How can I get back to Mountain Lion?

    Maverick is a mess, well up to MS at its best.  i installed it over Mountain Lion on a base Air that initially came with Lion.  The worst is when the screen suddenly goes blank.  After a few times, i found tha tsimpy pressing the power button brought up the welcome screen which - after the password - took me back to where I was with no loss, bu tthe first time was horrible.  Then WORD for MAC started behaving strangely, with normal operations simply not working - shading to copy or cut out, for instance.  Click again and again, no shading - then suddenly it workds!  Safari has similar issues.  So too with other software downladed earlier.  simply nothing works as well as all did under Mountain Lion.
    So, I want to deep six Maverick and get back to Mountain Lion.  I assume that if I use CONTROL R I will simply reload Maverick.  Can I download Mountain Lion from the App Store and then ???  All the copying and such - a half day lost.  Is there are easier way? 
    <Edited by Host>

    It's Command-R, not Control-R. You won't lose your files or settings if you reinstall 10.9 this way. Why don't you give that a go before reverting to 10.8.
    http://support.apple.com/kb/PH13871
    Enjoyed the Sarah Palin crack, btw.

  • Can i get a free os lion if i have bought my mac book pro 2 weeks after the launch of the os lion

    hi .  i bought a mac book pro from the US . it came witht the older os . offcourse assuming that this would have been packed in china before the launch of os lion . would i have to buy the os lion or is there any way of getting an upgrade without paying for it

    See
    http://www.apple.com/macosx/uptodate/

  • How can i get a power bar code i only have a ee mobile wifi

    How can i get a power bar code i only have a ee mobile wifi which doesnt allow me to sent texts .. ive tried the sim card in a unlocked phone but it wont send texts

    You could try putting your SIM into an EE phone. It's only a SIM, it should be be able to send an SMS.

  • How can I get my ical to sync on all ios devices (imac, macbook, ipad, iphone)?

    How can I get my ical to sync on all ios devices (imac, macbook, ipad, iphone)?

    Setup iCloud on all the devices and computers as described here: http://www.apple.com/icloud/setup/

  • How can I get rid of old books that I have deleted from my device? It still shows up as purchased books on "Icloud".

    How can I get rid of old books that I have deleted from my device but still shows up as "purchased books" on "Icloud". I don't want to see some of these books at all. I can sort by one that are PDFs and ones currently on device, but it still gives option to show those old titles. Does anyone know how to erase your "Icloud" history, please?

    Nooooooo! lol... If I want to download again I will, I don't want an electronic trail. Plus when I have Ibooks open, sometimes I will accidently hit the item and it will immediatly try to download it. The problem with that is that its "Time magazines Best Photos of 2012" etc and it locks up my IPAD cuz of sheer size of the book. So I would like it gone from the history. Isn't there a way to clear the history? 

  • How can i get my contacts back if i dont have the back up

    How can i get my contacts back if i dont have the back up

    if you didn't back them up then you cant get them back without physically puting them back in.

  • I lost my Hard disk and had to replace it, how can I get another copy of lion OS, P.S. I bought my macbook pro with preinstalled Lion OS

    I lost my Hard disk and had to replace it with a new one, how can I get another copy of lion OS, as the guy at the serive center installed 10.6 for me.
    P.S. I bought my macbook pro with preinstalled Lion OS

    If you have a way to wipe 10.6.8 off, you can then reboot your machine (with no OS) and since your system came preinstalled with Lion, Internet Recovery should occur which will boot to Apple's servers into a Recovery HD for you to redownload and install Lion.
    To be safe I would first make a clone of the current installation using Carbon Copy Cloner or SuperDuper!. This way you have a way to recover.

  • My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I was downloading music from my partners purchased music on my phone and it wiped all my existing music, how can i get my music back as i dont have it on my computer anymore?

    i was downloading music from my partners purchased music on my phone and it wiped all my existing music, how can i get my music back as i dont have it on my computer anymore? please help me 

    If you bought this music from iTunes you can download it again from within your Purchases in the iTunes App.
    Otherwise, razmee is right. you can only sync to one itunes library.  If you sync to another one whatever does not exist on the new library will get removed from the phone.
    That's is by design to avoid Piracy. As otherwise you could simply transfer purchases to other users.

  • HT204306 How can I get my old password back after I have changed it? I cannot change it back because it has been used in the last year

    how can I get my old password back  after I have changed it? I cannot change it back because it has been used in the last year

    HI, thanks, but I know I can set a new password. I just wanted to get my old one back cos I have used it a long time & can therefore remember it.

  • How can I get speaker volume contol in the toolbar on my iMac ?

    How can I get speaker volume contol in the toolbar on my iMac ?

    System Preferences - Sound - Click the box in the graphic below:

  • How can i get emojis on my keyboard ? i have a iPhone 5c

    how can i get emojis on my keyboard ? I have an iPhone 5c

    Go to Settings>General>Keyboard>Add Keyboard and add the emoji keyboard. Then you access that keyboard by tapping on the globe icon to the bottom left of the keyboard area and it will toggle between your standard keyboard and the emoji and you click away!

  • How can I get my iPhone ID when i dont have box, and it is not in "my products"

    How can I get my iPhone ID when i dont have box, and it is not in "my products"? Please help. I lost my phone.

    Here are the various ways:
    http://support.apple.com/kb/ht4061
    If you setup a support profile with Apple, you can also login to your support profile & find the SN listed there.

  • How can i get Messenger to work or do i have to download parallel

    How can i get Messenger to work or do i have to download parallel

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

Maybe you are looking for

  • I have a mac, and have to redownload safari every time. Why?

    So each time I log on to my macbook pro, it makes me re-download the firefox. What happens is sometimes, the firefox symbol is up and it wants me to re-drag EVERY time over to applications folder. When I do, it says you already have it, would you lik

  • T430 brightness - Fn and F8/F9 not working

    Stopped working a few days ago, so downloaded and reinstalled the Hotkey driver, installed the new BIOS and updated the Ultranav driver, but to no avail.  Fn and F9 displays the brightness bar at 15, but Fn F8 does nothing at all.  Any idea how to ge

  • Sql Loader Direct Path Upload

    I am trying DIRECT path upload to insert data from flat file to oracle table which has some indexes.The table is used by a procedure for dml operations on another table. Previously,we used conventional path upload with PARALLEL=TRUE option. I read th

  • Need to recover lost Windows license associated with HP laptop

    I have a HP G71-340US. I installed a separate copy of Windows 7 onto the laptop. I wish to find my Windows Product ID number (Serial Number) from my set of install disks which I've lost. Is there some way to send my laptop serial number in (CNF94607F

  • Java Cache Issue on SAP MII 12.1 SP09 (Build 116)

    Hi All, Has anybody experienced this issue before? Problem Description This installation is a central MII instance, which is HP hosted in Swindon, UK. On Login we are experiencing a delay in loading the Java Applets, i.e. iGrids, iCharts, iCommands e