HT1444 How do I updgrade from OS X v10.5.8 to at least OS X v10.6?
How do I updgrade from OS X v10.5.8 to at least OS X v10.6?
Upgrading to Snow Leopard, Lion, and Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion contact Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Similar Messages
-
HT1338 How to get updgrade from OS X 10.5.8 on line?
How to get updgrade from OS X 10.5.8 on line?
Phone the online Apple Store and order Mac OS X 10.6 on DVD. No downloads for it are available to the general public.
(70458) -
how do I upgrade from Mac OS 10.5.8 to later versions so new software like turbo tax will work?
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I have an i mac operating on 10.5.8. I want to iupgrade to Lion but I need to have snow leopard. How do i do this?
You cannot download it. You must buy the disk.
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA&mco=MTc1ODgwMjE -
How do I upgrade from OS X v10.5 to OS X Lion?
I am really strugging here; can't seem to find anything on the site to make this happen. Any help would be greatly appreciated.
Hi, you either have to buy the 10.6 Disc online, upgrade to 10.6.6 or 10.6.8, then you can buy Lion online.
You can also get Lion on a Flash Drive, but...
https://discussions.apple.com/thread/3375089?tstart=0
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 2GB at least)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Snow Leopard/10.6.x Requirements...
Lion/101.7 System requirements
• x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
• At least 2GB of memory[14]
• Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
• At least 4GB of disk space for downloading[14]
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
http://en.wikipedia.org/wiki/Mac_OS_X_Lion#System_requirements
http://www.apple.com/macosx/how-to-buy/ -
How do I upgrade from OS X v10.5.8 to OS X Lion?
It seems that the prerequisite for upgrade to OS X Lion is 10.6.8, but I can't seem to purchase/download OS X 10.6 (Snow Leopard) from Apple site anymore?
My iMac is with IntelPre-req for
Mountain Lion (10.8) is 10.6.8.
Lion (10.7) is 10.6.6.
Lion is available from a few non-Apple places in a USB Flash drive format that will allow you to install over a hard drive that has no operating system.
Before upgrading to either, read these tips:
https://discussions.apple.com/docs/DOC-2465 for Lion.
https://discussions.apple.com/docs/DOC-3761 for Mountain Lion. -
How do i get from os x v10.6.8 to the new os x v10.9?
i am trying to download the new update and cant get it without v10.7 but i cant seem to find it to download it. Can anyone point me in the direction i need to go?
Download 10.9 from the Mac App Store.
(92511) -
How to updgrade from Mac OS 10.3.9 to 10.4 or 10.5?
Hi, how do i upgrade from Mac OS 10.3.9 to 10.4 or 10.5? (except buying the software) do i have to achieve all my files before? is there any risks of loosing data? would i require to also buy a new Iwork office? or the 2007 version is still applicable?
Thanks for your help and replyaline_b1,
I'm presuming that you mean iWork 06 when referring to the 2007 version. It will work perfectly with OSX 10.4 (it has OSX 10.3.9 or OSX 10.4.3 as a minimum requirement). There are free updates from Apple for each of Keynote v3 and Pages v2, you may have these already.
It's always a good idea to backup you data whether you're upgrading or not. Something as simple as a USB memory stick will work, if you make the effort to compress the data - using the right-click "Create Archive" in the OSX Finder will be quick and easy. It'll also protect any files left over from OS9 (resource forks - if you don't know what these are, don't worry, you don't need to, compression will make sure that they are safe). Leave the original documents in place, the backup should only be needed if everything goes wrong.
You may also want to check the compatibility of all the applications you normally use with the new OS. Many of the Apple produced applications will come with new versions in the new OS. But others, like Firefox will have newer versions available if you want them.
If you want to list the programs (with version numbers) that you normally use, some here can help with compatability, and what the new versions are. You may however consider this to be revealing too much of your identity.
I'm planning a similar upgrade at the moment, Tiger is already installed (it has been since I bought it from new) on a 2nd drive, and I check the compatibility of all my applications in Tiger (it's a long list) before I will finally make the switch permanent. Some applications will continue to work, some will work with free patches, some will require new versions - of which some will be free and some will cost money.
I've also got to make sure that all my old documents (used Mac since 1985) are still usable with the applications available under the new OS. You may be more fortunate. -
HT1444 have os x 10.5.8 how to i get from there to the new mountain lion
have os x 10.5.8 how do i get from there to new mountain lion
Check your system capabilities.
SL just needs an Intel processor and 1 GB RAM.
Lion only needs Core2Duo processor ans 2 GB RAM.
These are ML requirements: http://www.apple.com/osx/specs/ -
In Pages 5.2.2: How do you go from 1 column to 2 and keep them on the same page?
Sorry, I tried to say your answer solved my question, but I guess I told it that my response to you solved it. Now that I liked it, the solved option doesn't appear.
-
How to import mailboxes from Time Machine to new Mac
I had Time Machine backing up our old G5. We got a Mac Pro back in November and I never was able to import the mail from the G5 to the Mac Pro so I left it alone and just kept using mail on the old G5. Well, the G5 took a dump last monday. I currently have the Time Machine backup for that computer connected to our Mac Pro (but not using it as backup yet). So, the mail from the G5 should be on the Time Machine backup right? If so, can I import it into Mail on the Mac Pro?
I also pulled one of the hard drives from the G5 and have it in the Mac Pro in the 2nd bay just to make sure that HD wasn't dead. It works fine and I tried importing the .mbox files from that drive but it appears that all the mail on that particular drive are from like 2006. So, again, I need to find out how to import mail from the Time Machine drive. Any thoughts?
10.7.4
Mail 5.2Back up what data? Mail data? I don't have any yet. I haven't used Apple Mail on this Mac Pro yet.
Edit: Launching Mail and holding Option right afterwards does nothing. Holding down option and then launching Mail does nothing.
Oooooh.... launching time machine while holding down option......
Edit again.... I don't have a Time Machine menu because that disk is not currently set up as time machine for the Mac Pro yet. I don't want to use it as a backup for this computer yet. I just want to be able to pull some of the backed up contents from it until I'm set. -
Good morning: would like to know how to take pictures from my iphoto and put them in a folder on my desktop
To take photos from iPhoto and put them onto a folder on Desktop, first create a folder on Desktop. Right-click on Desktop and create a new folder.
Then, open iPhoto, and you have two ways to export photos:
1. Select the photos you want to copy to Desktop with Command key (or go to Edit menu > Select All, if you want to copy all photos), and then, drag them to the folder on Desktop.
2. Select the photos you want to copy to Desktop with Command key, go to File menu > Export, and follow the steps.
You can choose the one you prefer -
How do I unsubscribe from subscription VIP in the game StarMaker? every week, I removed 66 rubles, while I'm there not even sit, and how do I unsubscribe don't know, please help
Contact the maker of the app. Apple has nothing to do with subscriptions to third party apps.
-
How to upload data from excel to form using webutil
Hi,
In the sample provided by Oracle
http://www.oracle.com/technology/products/forms/htdocs/webutil/howto_ole.html
Note 247606.1 How to Copy Records From a Form Into Excel
It shown the methods of how to copy data from form to excel but is there any sample to provide the step on how to read the cell from excel into Form in 10g.declare
args client_ole2.list_type;
application client_ole2.obj_type;
vworkbooks client_ole2.obj_type;
vdoc client_ole2.obj_type;
vworksheet client_ole2.obj_type;
vrange client_ole2.obj_type;
begin
-- create app object
application := client_ole2.create_obj('Excel.Application');
client_OLE2.SET_PROPERTY(application, 'Visible','True');
-- get workbooks object
vworkbooks := client_ole2.get_obj_property(application, 'Workbooks');
-- and open a file
args := client_ole2.create_arglist;
client_ole2.ADD_ARG(args, 'c:\tp_ae.xls');
vdoc :=client_ole2.INVOKE_OBJ(vworkbooks,'Open',args);
client_ole2.destroy_arglist(args);
-- get a worksheet object
-- for this to work you need to know the sheet name or its index
args := client_ole2.create_arglist;
client_ole2.ADD_ARG(args, 1); <-- name or index
vworksheet := client_ole2.get_obj_property(vdoc,'Worksheets',args);
client_ole2.destroy_arglist(args);
-- get a range object which in this case is just a cell
-- for this to work you need to know the cell coordinates
args := client_ole2.create_arglist;
client_ole2.ADD_ARG(args, 'B6');
vrange := client_ole2.get_obj_property(vworksheet,'Range',args);
client_ole2.destroy_arglist(args);
-- and here you get the value
message(client_ole2.get_char_property(vrange,'Value'));
-- release objects
client_ole2.release_obj(vrange);
client_ole2.release_obj(vworksheet);
client_ole2.release_obj(vdoc);
client_ole2.release_obj(vworkbooks);
client_ole2.release_obj(application);
end; -
HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE
HI,
HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE? & WITH EXAMPLE.hi,
chk this, put the data into an excel file.
fields inside it are name and age.
sample excel sheet.
coloumn 1 is name and column 2 is age
name age
A 8
C 13
D 55
DATA : int_excel LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
data : record like db_name_age occurs 0 with header line.
DATA : v_start_col TYPE i VALUE '1', "starting col
v_start_row TYPE i VALUE '1', " starting row
v_end_col TYPE i VALUE '2', " total columns
v_end_row TYPE i VALUE '10'. "total no of record
FORM f_upload .
CLEAR : int_excel, int_excel[].
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = wf_filename
i_begin_col = v_start_col
i_begin_row = v_start_row
i_end_col = v_end_col
i_end_row = v_end_row
TABLES
intern = int_excel
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
*Message is 'Unable to upload data from ' wf_filename.
MESSAGE e169(zm050) WITH wf_filename.
ELSE.
SORT int_excel BY row col.
REFRESH : record.
CLEAR : record.
LOOP AT int_excel.
CASE int_excel-col. "go thru each column.
WHEN 1.
record-name = int_excel-value.
WHEN 2.
record-age = int_excel-value.
ENDCASE.
AT END OF row.
APPEND record.
CLEAR record.
ENDAT.
ENDLOOP.
*inserting into table
modfiy db_name_age from table record.
ENDIF.
<i><b>ANOTHER EXAMPLE</b></i>
TYPE-POOLS truxs.
types: begin of t_tab,
col1(5) type c,
col2(5) type c,
col3(5) type c,
end of t_tab.
data : itab type standard table of t_tab,
wa type t_tab.
data it_type type truxs_t_text_data.
parameter p_file type rlgrap-filename.
data ttab type tabname.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = p_file
start-of-selection.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER = 'X'
i_tab_raw_data = it_type
i_filename = p_file
tables
i_tab_converted_data = itab[]
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
end-of-selection.
loop at itab into wa.
write : wa-col1,
wa-col2,
wa-col3.
endloop.
rgds,
anver
<i>if hlped pls mark points</i>
Maybe you are looking for
-
FM for calculation of Weights of a BOM?
Hi ABAP, i have/had to code a report which will display BOM´s. According to that BOM, i need to print out the weight of the components, the weight of BOM´s in the BOM, and the weight of the BOM itself. are there any FM´s that can calculate those valu
-
FCC source file gives error in mapping
While doing File Content Conversion Text to(XML) : Multiple Records occurring in SXMB_MONI and Receiver Channel not working(Mapping Error). Please can anybody tell me how to correct this error or how to proceed.
-
IOS apps often get "stuck" while installing- fix?
Summary: When downloading an app it will sometimes get "stuck" on the last step of installation. The progress bar is complete, but it says "Installing" for a long time after that, often requiring the device to be restarted. Steps to Reproduce: 1. Dow
-
Ajusting to the AS 2.0/3.0
Hello Iv been struggling abit with the new way that AS should be written. (im the old school flash scripter dropping scripts everywhere :) ). I understand the basic principle of classes and have been testing with them, but what i realy miss is, or ar
-
IPad stuck on message "hasn't been updated in 3 weeks." I can't get out.
My new iPad is stuck with a box "iCloud Backup: This iPad hasn't been backed up in 3 weeks..." I'm frozen out. The "OK" button doesn't work.