HT1451 I am trying to move two ring tones from my Iphone 4 to my new Iphone 5. I can see the ringtones on my old device in Itunes but I cant seem to move them to the Library or to the new device.
I am trying to move 2 ringtones from my Iphone4 to my new Iphone5. I can see the ringtones in Itunes on the old device. I cant seem to copy them to the library or to the new phone. Do you have any suggestions?
Hello DelaineF,
Congratulations on your new iPhone 5! It sounds like you would like to transfer your ringtones from your iPhone 4 to your iPhone 5.
If the ringtones were purchased from the iTunes Store, you can transfer them to iTunes using the steps in this article:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Once you have the ringtones on your computer, I recommend using the steps in the following article to sync it to your iPhone 5:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12313
Thank you for using Apple Support Communities.
Best,
Sheila M.
Similar Messages
-
when using facetime, the other person cannot hear me. I can hear them and we can see each other. my microphone works
This typically happens when you're using FaceTime on a WiFi connection that is either not too strong or not too fast.
-
When I ring someone from my iPhone 4 they can't hear me sometimes and other times they can hear me fine. This has only started happening since I updated to iOS 6 it was perfect the day before.
Good news! I believe I have fixed my phone!!
A friend of mine was having the same problem that I was having where you could hear other people but they couldn't hear you.
We fixed the problem by redownloading the 4.2.1 update. 4th post down on this page: http://forums.macrumors.com/showthread.php?t=1052794&page=5 is a list of links to the update files. I downloaded the one for my phone and did a restore (from a backup) after downloading the file and double clicking it so iTunes opens. Since I've done this my phone has been working perfectly again!
It might take you a few tries, it took my friend 3 tries until his worked right and it worked for me on the first try. I'm guessing something was screwing up during the download. -
I have an Iphone 3g and i can't turn on, but if i plug it on the Iphone charger i can see the Apple Logo but it quickly disappears(Apple Logo SOD) When I connect it to the computer it won't charge and it won't turn on, I tried DFU mode and it doesn't work. I tried STABBING IT(lol, it works sometimes) and i doesn't work again. If i can't connect it to the computer i can recover it but i know that it still works. WHAT SHOULD I DO!!!!!
http://reviews.cnet.com/8301-19512_7-10115048-233.html
http://support.apple.com/kb/TA38633
Apple suggest a removal and re-install of iTunes to get over the 1601 / 1602 error message.
Other sites suggest trying a different USB socket… direct to the PC / Mac not a hub.
edit to add usb info. -
I have consolidated iPhoto into aperture 3.2.2 and now have both aperture and iPhoto put consolidated library on 2.0 USB external drive. Have been removing duplicate photos from 23,000 down to 15,000. Problem in trying to close aperture and now tried to move library from 2.0 USB to 800FW and can see projects but no thumbnails. Aperture error now reads not responding. Can I repair library on 2.0 at this point?
Sharon,
did you do anything else besides copying your library to a fire wire drive after your last post Aperture not responding ?
Since that library probalbly already needed fixing, I'd recommend to force quit Aperture and use the "First Aid" to repair your Library.
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
Regards
Léonie -
ok my itunes deleted 11 of my songs and i cant get them back they are still on itunes and when i try to get them back on my ipod it wont let me i have tried every way possible and it wont even sync on itunes
That's because the iPhone is NOT a backup device. You're going to have to use 3rd party software to try and extract them from the phone. Unfortunately, the photos stored on the phone in anything other than the camera roll are NOT at the original resolution. Resolution is reduced for photos synced TO the iPhone to optimize them for the display.
-
Why can't I view my icloud backups on a new apple device using the same icloud id? Unluckily I lost 4 iphones in 2 yrs. all had same icloud acct on them, so when i log on to locate my current iphone on my macbook or on new iphone, it shows a list of all the lost iphones and their data take up.
When i click on settings on my ios> go to icloud > storage & backup> manage storage:
LOST IPHONE 1- 4.5 GB DOCUMENTS & DATA : it shows PREVIEW 1.2 MB PAGES1.6 MB TEXT EDIT91.6 KB PHOTOS 3.2 GB
LOST IPHONE 2- 3.2 GB DOCUMENTS & DATA: it shows same thing just different gb's mb's kb's
LOST IPHONE 3- etc.......
but you can't click on those documents & data to show what exactly they are so you can move them or save and delete. If I go into icloud there's nothing there from that long ago. is that data deleted? if i were to get that certain iphone back and turn it on would the pics, docs still be in icloud? it says all that room in my icloud is still taken up so where can i view it?? anyone know??
THANK YOU!If you haven't already, you could force-quit Quicktime by using the menu option from the desktop (finder) and choose Quicktime.
Not sure what you have frozen on the screen, be it a failed movie, or some unusual screen shot. If you can find by date (created) you may be able to look for .mov or quicktime suffix name or other video file content to delete it.
And you may have to restart your computer and perhaps run repair disk permissions from Disk Utility's first aid on the hard disk drive in your computer.
Not sure if all that would help now, but it is something a few days late...!
Good luck & happy computing! -
If i delet the current iTunes will my back up remain? My iTuness 11.1 download gets so far then an error occurs but when i follow instructions i just go round in circles. This IOS7 is crap
Chriss1538 wrote:
My iTuness 11.1 download gets so far then an error occurs but when i follow instructions i just go round in circles.
No help can be provided if no details about the problem are provided.
Chriss1538 wrote:
This IOS7 is crap
That's a matter of opinion. But honestly, the only crap is the pointless post whining about iOS7 and the user that cannot be bothered to provide sufficient information to get help in resolving their iTunes update issue. -
I synced ipod to itunes (windows), itunes removed all my single purchased songs from my iphone. I can see the songs in itunes, but they are gray and I can't move them back to my iphone or to any other device. I can't play them on the computer in itunes, I can't move them back to my iphone (where original purchase was made), and I can't move them into another ipod.
I had the Itunes store do this to one song out of three I downloaded. I went back to the Itunes store and reclicked on the song to download it again. It ran the download again and got the complete song this second time. Then I just resynced with my Itunes and all is fixed.
-
I purchased and downloaded two ring tones from an outside source (not through the App Store). How do I get these loaded into the Sounds on my Settings so I can use them?
Some apps that you download on your iPhone may possibly be to new for the iPod touch 2nd gen. I have a iPhone 5 and a iPod touch 2nd generation myself. If you plug his ipod into iTunes and restore it from a backup of your iPhone than it will download the paid apps and music that are compatible with his ipod. Hope this helps.
-
How can I create a new ring tone for my iPhone 4?
How can I create a new ring tone for my iPhone 4? I followed the Garage Band process and ended up with the ring tone I want as a AAC audio file. It got stored in my iTunes a a song rather than a ring tone. How do I make it a ring tone vs. a song? I tried dragging it t the Ring Tone category at the bottom of the ITunes list, but it won't alloow me to move it?
There's also an easy to use Applescript over at Doug's Applescripts for iTunes. It automates the whole thing. All you do is set the start and stop time on a file in iTuens and run the script. It will do everything else.
Make Ringable v1.1
http://dougscripts.com/475 -
I can see the thumbnails but when opening up it is all black
I use iPhoto 11. I just downloaded picture content op iPhone. I can see the downloaded pictures in thumbnail format, but when opening up, there is a bog black screen (without exclamation sign). Also other pictures downloaded before from camera SD have the same issue.
Is there somebody who has a solution for this issue ?
Thanks.There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
I can't import my HD videos (MP4) from my Samsung OIS Duo into FCP.
However, I can see the video with QuickTime.
In FCP, I just see a red box with a yellow triangle at the center(warning). Can someone help me. The video are Full HD 1080/60i.
I also try converting from MP4 to DV. Cannot import the .DV either.
Can someone help me?Could it be the case that you have "proxy media" selected in the preferences (under Final Cut Pro -> Preferences, click on "Playback" and see which is selected, proxy or optimized), BUT you are not creating proxy media when importing?
If that is the case, either
- switch to "original/optimized media",
or
- create the proxy media (control-click the clip(s) in the event browser, choose "Transcode media" e check the box for "create proxy media"). -
I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?
You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before. -
I am trying to copy 3 photos from an album in iPhoto to my iPhone. I have tried to move them to PhotoStream. I "select" the photos in the Album and then click on PhotoStream in the "Share" menu at the bottom of the screen. Nothing happens. I have also tried emailing them tyo myself but iPhoto won't send the email. It tells me it doesn't recognize my ID and password. My operating is Lion on an iMac.
Thank you for responding to my question, above, this morning. And thank you for the link about PhotoStream. It was helpful in understanding how Photostream works, but, unfortunately, doesn't really reference my problem since it assumes that the photos were originated on one of my Apple devices. The photos I want to copy to my iPhone are in an album on iPhoto but I had originally downloaded them from my camera to my iMac then moved them to the album. The confusing thing for me is that they are 3 of a dozen photos takern over a period of 12 years on different digital cameras (two were taken on film and later scanned and eventually moved to the album in iPhoto) and all but three of the photos moved to photostream and are on my iPhone. It is those three, which were all taken on digital cameras and moved to the album, which I can't get to move to Photostream.
Maybe you are looking for
-
[Pre Ele 9] Audio tracks in project are frozen. Unable to move, edit, or even select.
Hello, This is my first project using Premiere. Great program, when you know what you're doing. Right now, I'm on a modest laptop, Vista 32-bit, 2 gigs of RAM, Dual CPU @ 2.00 ghz. My project consists of .wma files, some .mp3's, .wav's, and some .jpg
-
I am a medical transcriptionist. I was using Firefox 4 and without knowing that Firefox 5 does not support Google Toolbar I updated it. Searching in google is a integral part of my job and without the Toolbar I feel handicapped using Firefox 5. You c
-
Portal Acitivty report to track Last login date of user
Hi, We need a report which shows the last logins of Users in Portal. We checked the Portal Activity Report but it is showing only First login. But we need the Last login how can I configure the Portal Activity report. Thanks Naveen.
-
"Phantom" field cannot be deleted; preventing submission of form
Hello, I have created a submittable form for my company, which is to be used for our employment application on our website. Somewhere along the way, a "phantom" field seems to have magically appeared in my document. It does not have the usual light-b
-
Can i use my ipad mini while charging?
can i play my ipad while charging? hindi ba siya ma-ooveruse? since na nag-charge and nagddrain (while using the ipad)?