HT1454 3d output for iphone to vuzix

Any one know how to set it up so that my iphone will output a 3d movie to been seen on a vuzix device

Read here:
http://www.vuzix.com/consumer/av_device_compatibility.html#iPhone_3GS

Similar Messages

  • Speaker Systems for iphone

    Are there any systems that work with the iphone? I tried plugging into my JBL ipod speakers, but the phone has a message come up that says its not for iphone use or something? Thanks, Kash

    Hi aleitch,
    Absolutely, it's a 2.1 set so you can connect it to the headphone jack output on the player.
    The IR remote will not work directly with the player, you can still control the speakers with it, but it does not work direct with the Zen Xtra player (it does with for instance the Zen Micro and Zen Sleek).
    Cat

  • Macbook pro speaker output via iphone 4 connect via bluetooth ?

    Hi,
    I wonder if anyone could help me out with this question on my head. If the functionality for bluetooth on macbookpro, could pair with the iphone's bluetooth and it could have the other function than only function like network sharing for example the one that I wish is sound output, so iphone could become bluetooth headset too.
    Thanks,
    Sfnteja

    Hi,
    Infortunately I do not have a solution neither.
    Just to add that I have a triple boot, with Mac OC, Windows Vista 32-bit and Windows 7 64-bit and I have the exact same problem in recognising the external iphone earset microphone.
    I have been trying to tweak the windows registry with no luck yet
    Hope that there will be an an updated version of the bootcamp drivers that will solve this.
    I went to an apple store yesterday (at Genius Bar) and i was unpleasantly surprised when a technician told me that the line-in socket was also compatible with an external mic (poor him)!

  • Console program for iPhone terminated in 20 seconds on simulator

    Hi,
    I have a console program for iPhone which simply uses printf to output. It works fine on iphone but not on Simulator.
    I noticed that iphone has a watchdog time to stop a program which loading more than 20 seconds. I believe the simulator treats my console application as a always loading one and terminated after 20 seconds. The evidence is if I cut my program into small pieces (finish running in 20 seconds), and run them piece by piece, no any problem happens.
    Since my customer wants that program runs on simulator as one piece, I'd like to ask if there is a simple way to turn off the 20 second timer, or let simulator know I am not loading anything.
    Thanks.

    I start my program from XCode IDE by 'Build and Go', then choose menu Run->Console to open the debugging console, I will see my printfs there.
    After 20 senconds, the output stops, on the bottom of Console window, I see 'debugging terminated'.

  • Can I create books for iPhone using iBooks Author?

    Can I create books for iPhone using iBooks Author?

    There is a new $5 iBooks Creator app in iOS app store for the iPad.
    The output looked pretty good for an iPad app.
    There is a video on how to use it to give you an idea of how easy it is.
    It creates ePub 2 whihc can be read on all platforms with an ePub reader except Amazon Kindle whihc forbids such things.
    You can run the ePub through Calibre and get MOIB for Kindle which works for me.
    I have done thirty or forty conversions so far.

  • HT1414 can somebody show me the right sim for iphone  like when updating your iphone

    unlock code for iphone 3gs

    see if this link helps http://support.apple.com/kb/HT1454#  and this link http://support.apple.com/kb/ht4108
    You'll need to purchase the apdapters from Apple.

  • OSX Lion and exporting for iPhone

    There was a thread about how when trying to set and/or publish for iPhone or edit its settings, Flash CS5 immediately crashes. The problem has been experienced by many Mac OSX Lion users and they talked about it in this unresolved thread: http://forums.adobe.com/thread/888198#3851750 but still no updates from Adobe. Adobe sent me a response to my Support ticket that "it's an Actionscript 3 coding issue" then closed it so I couldn't reply. Ummmm, NO it isn't a coding issue, I tried to export an FLA file with no code in it. That's a really bad way to do business, Adobe. But since they're not going to be helpful (and probably lose me as a customer) has anyone else found a workaround for this?

    ccroo wrote:
    The aspect ratio of the iphone screen is 480 x 320, but that size is not an option when exporting for iPhone using Compressor. You have to use a custom setting.
    Why is this the case?
    You have to understand that the Apple-provided presets are good launching points, not end-all, be-all settings.
    And iPhones do support material encoded as 640 pixels wide so the preset for VGA (up to 640x480) works fine for most people. I personally rarely use anything smaller than the VGA setting for Apple Devices as I find that's the perfect middle ground for iPods, iPhones and AppleTV.
    If you (understandably) need to limit your file and frame sizes, adjusting the device setting in Compressor to iPhone (Local/WiFi) does the trick - fitting your movie into a 480 pixel-wide frame size and capping the video data rate at 1000 Kbps.
    Letterboxing - as in hard mattes - is not needed when encoding for Apple Devices. In fact, if you have letterboxing in your source media, use the Geometry pane to crop out the Letterbox Area of Source. That will provide you with a better quality encode and the preset will know to adjust your output frame size, so you need not worry about distorting your movie.

  • Exporting for iphone

    I want to export material from FCP to compressor for use on iphone.
    The aspect ratio of the iphone screen is 480 x 320, but that size is not an option when exporting for iPhone using Compressor. You have to use a custom setting.
    Why is this the case?
    Compressor offers 320 x 240 and 640 x 480. Both of these are fine for an older ipod, but not for the wider screen of an ipod touch or iphone.
    Do they want us to letterbox a 3:2 image on iPhones and iPod Touch?
    Thanks for any help
    R

    ccroo wrote:
    The aspect ratio of the iphone screen is 480 x 320, but that size is not an option when exporting for iPhone using Compressor. You have to use a custom setting.
    Why is this the case?
    You have to understand that the Apple-provided presets are good launching points, not end-all, be-all settings.
    And iPhones do support material encoded as 640 pixels wide so the preset for VGA (up to 640x480) works fine for most people. I personally rarely use anything smaller than the VGA setting for Apple Devices as I find that's the perfect middle ground for iPods, iPhones and AppleTV.
    If you (understandably) need to limit your file and frame sizes, adjusting the device setting in Compressor to iPhone (Local/WiFi) does the trick - fitting your movie into a 480 pixel-wide frame size and capping the video data rate at 1000 Kbps.
    Letterboxing - as in hard mattes - is not needed when encoding for Apple Devices. In fact, if you have letterboxing in your source media, use the Geometry pane to crop out the Letterbox Area of Source. That will provide you with a better quality encode and the preset will know to adjust your output frame size, so you need not worry about distorting your movie.

  • Export for iPhone with crop?

    I did searchs for iPhone AND crop and iPod AND crop, but nothing came up, so...
    Is it possible to use QT to export to iPhone with a custom crop? I'm starting with 1280x720 HD video from a Flip MinoHD. I would like to end up with something in a 3:2 ratio like 480x320 (either cropped to 1080x720 and then scaled or scaled then cropped to 3:2).
    I can do this crop if I export to MPEG-4 and it works great. This export option, however, comes out as mp4, instead of m4v and doesn't work on the iPhone.
    Any way to do this QT?
    How about QT Pro?
    Thanks!

    Do you have any idea if I'm doing something wrong? Here's an excerpt from my email to the author (I didn't mention cropping as to simplify my question/bug report)
    Since you did not describe your actual "crop" work flow for MPEG Stramclip I suspect that is where your problem lies. Basically you are going from a 1.78:1 to a 1.50:1 aspect ration. Therefore your will have to crop the left-right edges and not the top-bottom. Since you indicate want to end up with a 480x320 viewing area, try the following:
    1) Select either of the iPhone presets. Since you will have to customize the dimensions, as well as, crop the file, it doesn't matter which preset you choose.
    2) Back in the main MPEG-4 export window, re-set the "Other" dimensions to 569x320. What you are in effect doing is setting the target height of the output you want and adjusting the width to the nearest pixel for a 16:9 aspect ratio to match your source file and, thus, minimize any distortion.
    3) Set output audio and/or video rates as desired (I normally use 1000 or 1200 Kbps for video and 128 Kbps @ 44.1 KHz for audio) and make any adjustments to brightness, contrast, saturation, volumes, etc. if desired.
    4) Now activate the "Cropping" tool by "ticking" the correct box and leave the option in the "Destination" mode.
    5) Now enter your left-right crop settings. These setting must total 89 pixels to be subtracted from the 569 scaled pixel width which will leave you with your specified 480x320 viewing area. How much you decide to crop from the left and right sides is up to you but must total 89 pixels. Thus you can keep the center area or chose to offset the viewing area as best suits your needs.
    6) Now preview the content to be sure it is exactly what you want and if/when satisfied, select the "Make MP4" button to set up and begin your export.

  • 18650 batteries as an on the go charger for iPhone

    Dear All,
    I just ordered this bike light :
    http://www.ebay.co.uk/itm/110992304085?_trksid=p5197.c0.m619#ht_7119wt_1124
    As it has a big battery I want to add another function to it which is charging my iphone on the go.As you will read it has 4x 18650 Battery which makes the output equal to 4x3.9=15.6 volt.
    What is the best option to bring the voltage in the range of 5 volt to make it appropriate for iphone charge?
    Any notion on the current?
    Have you got any idea?
    Thanks

    Hi there, I know it's been a year since your post, but did you still require help with your charger, as I had great fun making simple iphone chargers over the last couple of years.
    Simon.

  • Is it possible to restrict an iBook for iPhone devices?

    Hi,
    I'm preparing a book to be sold on iBooks, but I've noticed that it wouldn't be read correctly on iPhone because it's a technical book (full of code and output source) and it won't be read well on small screens.
    May I set the book is not recommended for iPhone devices or restrict it to iPad? or anything? I don't want people to buy my book and find it difficult to read because of the coding parts being unreadable on iPhone... I'm attaching two examples of my book in Kindle...
    Thanks a lot in advance!
    Javier

    You can email or ring Apple:
    I cannot find the answer to my question. Where can I get additional help?
    iBooks provides support via email and phone:
    Send an email to [email protected]
    Contact the iBooks Support team by phone, Monday through Friday from 7 a.m. to 5 p.m. (PT). Local phone support is availabie in English in the countries listed below.
    Austria
    0800 070 267
    Australia
    1300 307 504
    (Note that this is a low tariff number.)
    Denmark
    8025 1619
    France
    0805 540 117
    Germany
    0800 664 5307
    Italy
    800 915 902
    Netherlands
    0800 0201 578
    Norway
    8005 6951
    Spain
    900 812 687
    Sweden
    020 100 528
    U.K.
    0800 975 0615
    U.S.
    +1 (877) 206-2092
    (Toll-free from U.S. and Canada.)

  • Jabber for iPhone and iPad cannot receive calls

    We currently have Call Manager 9.1.1 and Presence 9.1.1.
    I am starting to use the Jabber Client for iPhone and iPad, but am having trouble receiving calls dialed to a particular extension.
    If I can go settings for the iPhone Jabber client as an example, I am succesffuly connected to all accounts: IM, Phone Services, Voicemail, and WebEx.
    When I go to the keypad, I can succesffuly dial internal extensions and make outbound calls to any numbers and they come accross as using my extension.
    When calling the extension, my desk phone rings, but not the Jabber client.
    Not sure what could be causing this issue to occur for Jabber not receiving the calls.
    Thanks for any suggestions.
    Paul Gaydos 

    Should still work. But would be good to check indial into jabber with the phone unplugged, just for testing purposes.
    also, you have checked the partition and configuration on the TAB device is the same as on the deskphone?
    Can you attach call manager traces when making a test call and attach to the case.  Let us know the extension and device names you have used in the test, and a timestamp of the test.
    thanks
    =============================
    Please remember to rate useful posts, by clicking on the stars below. 
    =============================

  • All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

    All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
    With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

    Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
    Here's a link to the product feedback page: http://www.apple.com/feedback/
    I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
    I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
    Cheers!

  • Anybody facing issues on vodafone in bangalore for iphone 5s. horrible voice breaking occurs.

    anybody facing issues on vodafone in bangalore for iphone 5s. horrible voice breaking occurs. Really frustrting as voice calls break and automaticcaly gets disconnected.

    My current phone is not working. The iOS 8 update has made my phone go from a joy to have to something I want to throw away. I would like to uninstall my update and go back to loving my Iphone again. Can you please help? I've sent numerous messages with no response. I'm trying to stay loyal to Apple however if your only suggestion is to purchase another phone it might not be an Apple product anymore. I'm offering an opportunity to save a client who has multiple Apple products.

  • App Store on the iPad (iOS 6), can you view the Top Charts for iPhone?

    In the App Store on the iPad (iOS 6) can you view the Top Charts for iPhone? It used to be possible in a previous version of iOS.

    disregard post.

Maybe you are looking for