HT1454 How can I disable the TV Out, so I can watch my TV shows on my ipod?

I want to watch my TV and movies directly on my ipod.
For instance, if I am on a bus and don't wish to connect my ipod to a big screen TV, or any other type of video monitor; I just want to view the TV and Movies on the little screen provided on my ipod classic.
I read the manual, but the instructions make no sense. It says to go to VIDEO> SETTINGS> then turn TV Out to ASK or ON...
But, there is no actual "VIDEO." Instead, there is MOVIES, TV SHOWS, MUSIC VIDEOS... 
So, I go to TV SHOWS, (as that's what I want to watch) which shows what TV Shows I have on my ipod, I select the one I want, which tells me that the TV OUT IS ON, PLEASE CONNECT VIDEO ACCESSORY.
Going to SETTINGS on the main menu is fruitless, as well.
Please... someone, please, help me?
LilyAngel

Dear planb77,
I can't thank you enough... and yes; there was no, "Video" on Main Menu. But there is now. I would have never thought to reset the settings for that result... Duh.
Anyhow, I sincerely thank you.
LilyAngel

Similar Messages

  • How do i disable the bookmarks list from my iPad which is now showing on my new macbook?

    How do i disable the bookmarks list from my iPad which is now showing on my new macbook?

    On the iPad: Settings > iCloud and turn Safari off (if you don't have any other devices you want it to share with)
    and/or
    On the Mac: Apple Menu > System Preferences > iCloud and turn Safari off

  • HT1454 How do I set the TV out on my iPhone 5?

    I can't find the setting to get my iPhone 5 to do TV output... Please help.

    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

  • How can I disable the printing out of zone.property vars when using jpdk test page?

    I have had a tar in on this question for two weeks now. Since
    the only response I have gotten is wip, I was hoping someone
    here might have some ideas.
    When I run the /servlet/sample page after setting up my JPDK, it
    runs just fine. HOWEVER, it displays all the initargs that I
    have in my zone.properties on the screen. I don't want these
    args to be seen.
    How do I disable the display of initargs on the /servlet/sample
    test page?
    For example, this is what displays:
    Congratulations! You have succesfully reached your Provider's
    Test Page.
    Checking for components:
    Portlets are:
    Test
    FilePortlet
    SystemNav
    Oracle Jsp detected
    Recognizing initArgs: Usual initArgs are provider_root and
    sessiontimeout
    snode http://sys/home
    pswd snvs
    uname sysa1
    debuglevel 1
    I do not want the initArg variables to show up on this page,
    since I have username and password variables that I use in my
    servlets.
    Any ideas will be appreciated.

    I got a reply on my tar.
    Apparently I have to edit the HttpProvider.java to change this
    behavior.
    Regards.

  • How do I disable the mute microphone icon on the Facetime page so that others can hear me speak, in addition to them seeing me?

    How do I disable the "mute microphone" icon on the Facetime page, so that the video recipient can not only see me,(which they can), but also to hear me as well?

    When you are on a Facetime call, click on "Video" on the top menu bar.  You'll see "Unmute" on the dropdown menu -- click on it.  Your mic should now be unmuted.  Note: You must be on a Facetime call, otherwise the mute/unmute option will be grayed out.
    Of course, when your mic is unmuted the option will turn to mute.

  • My iPhone 5s won't let me disable digit password in favor of finger print. Print is setup, how do I disable the pass? (Disable is greed out) it also requires it immediately and I want 15 mins.

    My iPhone 5s won't let me disable digit password in favor of finger print. Print is setup, how do I disable the pass? (Disable is greed out) it also requires it immediately and I want 15 mins.

    And, if you use Touch ID, there is no option for a delay.

  • How do I disable the plugin check at Firefox Version 18 or higher startup?

    This thread carries on from a discussion about How do I disable the plugin check at Firefox startup? As clearly Tylerdowner did not like my previous message and so would like me to obviously start a whole new thread to find out what’s going on.
    https://support.mozilla.org/en-US/questions/938821
    Tyler: I am still looking for support and so are the other 83 people who have this problem. Hence why I am here, not to have to start another thread, not to have a go at you or just to run around further to get a clear, straight forward answer. I am now back to running Version 12 (which, has not solved the problem), with up-to-date plugins which are all supported.
    Don’t fob us off, PLEASE HELP. Unless I am very much mistaken, this is the place we are meant to find help, right? Not to be completely blown off because somebody says something you don’t like. Perhaps someone better suited to this will help. I’ll follow on from then with MY problem from Tyler’s final comment as it is highly relevant:
    Tylerdowner: Rumor Control, if you are running Firefox 18 with up to date plugins, then you are having a different problem than this thread is about. This is for Firefox 3.6 users who have old plugins, not those with updated software.

    I should also add this info for all to see clear as part of my question (can be seen in More system details too):
    I liked that version, was the first ever FireFox browser I tried and because of it made it my number 1 browser. There have been a heck of a lot from 3.6 to 18 though I think we’d all agree. Progress can and often is messy, but worth it.
    Which is fine except mine, a different version, up-to-date plugins – and I’ve still same problem as these guys. It’s exactly the same even for me who has updated: How do we get rid of the Plugin Check Screen every time we start FireFox? I know I am up-to-date – as it tells me every single time!
    I agree everyone should be up-to-date with the software and this may very well be the case that solves a lot of people with lower versions – yet I can say I updated from version 12 to the latest 18, spent the time getting half a dozen different updates as it wanted (all of which are supported according to the link you provided) plugins and yet I am still having the same problem as users with 3.6 and older plugins! Went back to version 12.0 and I am getting the problem since installing version 18.
    Therefore from the fact I’m still getting the popup every time telling me everything is updated and safe, which is lovely to know, still doesn’t change the fact it won’t go away! Not a major problem but it is getting tedious now every single time.
    Like I say I am willing to wait and see if this gets fixed anyway which to be fair, FireFox seem to do a lot better than the competition. If it doesn’t though I’d still rather go back to an older version just to be rid of it! But not even that is now working to be gone of it! It’s gotten that ridiculous for me now too!
    :)

  • How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?

    Someone else posted ths question a month ago, but still no answers.  Anyone?
    How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?
    Windows XP, SP3 operating system recently re-installed so I also reinstalled my printer software.  Now, for some reason, each time I turn my computer on, my HP Photosmart C4100 all-in-one photosmart premier software opens.  It is not in my startup.  This slows down my computer terribly, which is why I never used the program before my re-install.  How can I disable this feature?  I only print, I don't use it for photos.
    Any help here is appreciated.

    Run msconfig.exe from the start button (type in msconfig).  When it comes up go to the Startup tab and find and deselect the HP product you do not want to start.  Save and reboot computer.  Now try.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?

    How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?
    I have a few hundred computers running Adobe Flash Player.
    The operation system is Windows XP.
    They are Compaq 6005 desktop PC’s, with an inbuilt ATI radeon HD 4200 video card.
    We have a persistent issue where viewing a flash video (e.g. something on youtube) causes the video card driver to crash.  You are left with no video signal to the monitor.  Audio continues and the computer still responds to commands. This only happens when watching flash video.
    We have tried:
    Updating flash plugin (numerous versions)
    Updating the video card drivers (we have tried the last three video card driver versions, including the HP drivers and ATI drivers)
    Updating the browsers (this problem happens with IE8/9 and Firefox10/11/12)
    There seems to be two ways to work round this issue.  One is to disable the video acceleration in the ‘troubleshoot’ section in the advanced part of the display settings area in windows.  The other way is to start a flash video, right click, go to ‘settings’ and untick the box marked ‘Enable Hardware Acceleration’.
    Doing either of these things allows the user to view flash videos with no apparent issues.
    Is there a way to disable the hardware acceleration in Flash without visiting the PC?  Perhaps an undocumented option in the mms.cfg file? I understand that you can use an option to skip the video card check, and so force hardware acceleration on, can you do the opposite?
    Thanks in advance
    Daniel.

    Hi.
    I have had over 200 views, and no suggestions as to how this could be fixed.
    I have also posted in the general flash forum, that thread has fewer views.
    If I should put this question in a different forum please let me know which one.
    If what I am asking is not possible is there a mechanism for escalating this issue or requesting a feature for the next version of flash?
    Thanks.

  • How do I disable the welcome screen in iCloud

    This may seem like a simple question but every time I attempt to access my iCloud account, I get the Welcome screen asking me if I want to activate Find Your device (whatever device I'm using) and if I want to activate Find my Friends (NO) etc.  Half the time I don't even know what the correct address is for iPad and get all kinds of other websites and I just give up.  Now I'm in a CRITICAL SITUATION in which I've gotten a Time Machine message that my WD Drive is no longer backing up and must be reformatted immediatly  - YIKES!  As you all can see I am very frustrated - I am still in the process of restoring data I lost from a hard drive failure in JUNE 2011 LOL How do I disable the Welcome screen in iCloud?  What exactly is the correct web address?  Sounds like a question for Watson.  I know others have had a similar problem with WD external drives; can I recover enough data to get me back up and running?  All my Time Machine back ups are on that drive. Awhile ago I bought Carbon Copy; it is apparently not functioning as it should (again back up on that drive) because I did the upgrade prior to getting the data off the WD drive, it installed a Trial Carbon Copy and is now asking me to reinstall what is sees as new software thus the last disc image is "lost.  HELP PLEASE

    Where are you trying to access your iCloud account, and from what device?
    If you are trying to access your iCloud account at http://www.icloud.com/ from an iOS device, you can't. The iCloud.com website is not designed to be accessed from iOS devices - access it on your Mac.
    Your Time Machine and WD external backups and Carbon Copy backups are nothing to do with iCloud, so I don't know what you think accessing iCloud will achieve in your situation anyay.

  • How do I disable the reload on the back button of Firefox and have it display the cached/prior page version?

    Every time I click the "back" button, Firefox reloads the previous page I was on. How do I disable the reload and have Firefox display the cached/prior page version? The whole point of going "back" is to see what we were just looking at.. I don't want a refreshed version of it. Any help would be greatly appreciated! I am running version 3.6.12.

    No problem. It's not a request that's been seen much if at all to be honest. I rely on them myself.
    You can always feel free to provide feedback to Apple though.
    http://www.apple.com/feedback/

  • How do I disable the TTY option on my i phone (Version 5.1.1.)

    How do I disable the TTY Option on my I phone 4 (Version 5.1.1.)

    The only time that setting should not appear is if there is a sim in your phone from a non-supported iPhone carrier. Then, TTY can be turned on by default. So, try this:
    Settings>General>Reset>Reset All Settings.
    That should get rid of the icon regardless.

  • How do I disable the Firefox allow page display

    How do I disable the Firefox allow page feature.
    when I click on allow, it completely knocks me out of the website in which i have to log in again.

    Uncertain of your question. If you are getting a re-direct to another page after signing in (common occurence after signing in) check the following setting:
    *''Firefox button > Options > Options (or Tools > Options) > Advanced > General (Accessibility section), '''<u>un-check</u>''' "Warn me when websites try to redirect or reload the page"''
    Advanced options panel - https://support.mozilla.org/en-US/kb/advanced-settings-browsing-network-updates-encryption<br />
    Link to other options panels - https://support.mozilla.org/en-US/kb/firefox-options-preferences-and-settings
    Other- You should check your plugins and update as needed.
    #Check your plugins - https://www.mozilla.org/en-US/plugincheck/
    #Seriously out of date and subject to known vulnerabilities - '''''Next Generation Java Plug-in 1.6.0_29 for Mozilla browsers'''''
    #*NOTE: Java 6 versions are scheduled for end of life (no more updates or support) in February 2013. You should probably update to Java 7 latest release.
    #*Update to lastest 1.6.41 or 1.7.15 from page below. '''''JRE version''''' for most users; '''''JDK version''''' for developers. '''''i586''''' for 32-bit browsers (Firefox is 32-bit)
    #*Download JRE version, save, close all browsers, run installer you just downloaded - http://www.oracle.com/technetwork/java/javase/downloads/index.html
    #*Also see - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content

  • How do I get the pictures out of my iPhone 4s and save it to my PC?

    How do I get the pictures out of my iPhone 4s and save it into my PC?

    Hello i-am-big-david,
    On a PC (Window 7) the iPhone shows as a digital camera in Windows Explorer under the computer section. You can import the photos from there. Sorry I'm not familiar with Windows 8, yet.
    Read here > http://support.apple.com/kb/HT4083

  • How do I get the cd out of the computer?

    How do I get the cd out of the computer once the music has been downloaded?

    You can drag a CD/DVD to the trash to eject it.
    The Eject key is at the top right of the keyboard. An up arrow with a line underneath.

Maybe you are looking for