HT1455 ?

how can i download Adobe flash player in order to watch videos if my mac requires a software update and it wont update?

Hello, to upgrade beyond 10.5 you need to get a 10.6 Install Diuisc & meet the requirements...
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
It's reported that if you have a MobileMe account that Apple will send you SL/10.6 for free.
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

Similar Messages

  • HT1455 What if my computer will not start up in safe mode?  What next?

    What is the remedy for a MacBook that will not start up in safe mode?  The gray apple icon and progress wheel appear, I let go the shift key and the whole thing shuts off again.  Please help.  Thank you.

    My understanding is that the Apple logo is produced by the disk and the spinning wheel shows that the software boot process has started.
    1 - Shut down your Mac
    2 - Press the power button to start and
    3 - Immediately press and hold the Command (Apple) key and the S key
    4 - At the prompt type the following and then hit return:
    /sbin/fsck -fy
    fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issues were found:
    ** The volume (name_of_volume) appears to be OK
    If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
    ***** FILE SYSTEM WAS MODIFIED *****
    Important: If this message appears, repeat the fsck command you typed in step 4 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do). When fsck reports that your volume is OK, type the following at the prompt and hit return:
    reboot
    Your computer should start up normally and allow you to log in.
    Good luck.

  • HT1455 I tried to install windows 7 on my imac but the computer was not booting again what shall I do?

    I was installing windows 7 on my imac but the installation was not completed and now I cannot boot what shall I do?

    Provided you used BootCamp to do the installation, with your machine off, press and hold down the "Option" key while turning it on.  Hold the key down until you get the screen where you can select which OS to boot into.  Select OS X (you'll need to physically click the button here... tapping won't work if you have it enabled).  Once in OS X, go into System Preferences and Startup Disk.  This is where you set the default OS to boot into.  Change it to OS X.  Relaunch BootCamp Assistant to remove the failed installation of Windows.  You can try again if you wish.

  • HT1455 iMac shuts down itself in the middle of Safe Boot progress bar loading

    Hi, Im using a late 2009 iMac 21.5'' on Mountain Lion. (Originally Snow Leopard I THINK)
    I got the dreaded grey screen one day and after I did more reseach i tried using the Safe Boot way.
    Now Ive encountered a new problem, everytime I turn on my mac, it shows the Apple logo and the Safe Boot progress bar.
    Not even reaching halfway through the bar, it just shuts down itself, every single time.. please help?
    Btw, I',m using a wireless keyboard, I had to go around borrowing a windows keyboard from my friends, I dont know if anyone can shade some light if i can use wireless to do the keyboard pressing thing when it starts up?
    I've also tried inserting my original OS installation disc and press C..it just shows a grey screen, then the disc got ejected, then the Apple logo with the progress bar and then shuts down itself.
    Please help, I just need to go into my system one more time and backup my important datas before i go for the 1TB Seagate Replacement Program.
    Thank you so much, appreciate it!

    hendry17 wrote:
    Is that similar with this article http://support.apple.com/kb/ht1553 on 'Instruction for backing up to an external hard disk via Disk utility' ?
    No, that copies the entire drive IF it's entirely readable which you don't need, you only REALLY need is your files as everything else (OSX and programs) can be replaced)
    Ds store: I read your article on creating a data recovery.
    This is designed to install OS X onto a external drive, boot from it and then:
    1: Attempt data recovery via normal drag and drop methods on your Users folders.
    2: If the above fails, to see if the internal drive is working via Disk Utility, and/or use Data Rescue software ($100) to attempt recovery of the files themselves, bypassing the file structure and whatever is causing the problem.
    3: Build your extenral boot drive of everything the way you need it, then Carbon Copy Cloner the external onto the internal drive (new or erased whatever the case may be)
    May I ask you why not port powered?
    Mac's have been shutting off ports that are drawing too much current, like what port powered hard drives do.
    Am planning to get myself a 3TB external HDD 3,5" for all my backups in time for my AASP journey
    Too large for a boot drive, you basically want a external boot drive equal too or slightly larger than the boot drive your recovering from, because later you can use it as a bootable clone backup of the entire boot drive and store it for emergencies.
    These large drives like 1TB and 3TB are sometimes problematic (especially with 10.6) when formatting. Also I advise all boot drives be Zero erased before OS X is installed or cloned onto it to reduce bad sectors,  a zero erase on a 3TB drive could take 6-10 hours.
    If you want to use the 3TB, use it for file backup, not for your bootable clone your creating with the instructions I gave.
    You see later on, once you got all your data off the internal boot drive, you build the external boot drive just like you would do a brand new erased internal drive. You add programs and whatnot, tweak it how you like. Because later on your use Carbon Copy Cloner to clone the external onto the erased or new internal drive. Get it?
    So 3TB is excessive if your internal boot drive is only 500GB, you will have 2.5TB left over.
    Sure you can partition, but I don't advise having so many backups on one piece of physical media, you drop it, lose it or fry it, you lost everything.
    So more and seperate pieces of backup are safer in that regard, hardware and software redundancy.
    Most commonly used backup methods
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • HT1455 won't boot.  no grey screen.

    my computer will not boot.  will not even get to the gret scree
    n.  can anyone help?

    See the no power up section, do a SMC Reset
     Cheat sheet to help diagnose and fix your Mac
    And if the Mac is dead, you might want to retireve the hard drive and recover your files off.
     Data recovery efforts explained

  • HT1455 I have started my computer in safe mode as recommended but not long after the grey Apple icon appears with the spinning gear it automatically shuts down! any suggestions?

    I have started my computer in safe mode as recommended but not long after the grey Apple icon appears with the spinning gear it automatically shuts down! any suggestions?

    Try these options:
    Credit Kappy.
    This support article addresses a 'blue scree';
    http://support.apple.com/kb/PH7212
    Ciao.

  • HT1455 it is asking for a passcode to enter safe mode

    my husband moved all the applications  everywhere and i dont no how to put them back is there anyway to back date the computer ,he removed system settings its not in the right place so i cant open it ,the computer want let me clinck on nothing i have a osx 10.4.11  its old

    Wow, sounds like Firmware protection is setup!?
    Firmware password protection in Mac OS X ...
    http://support.apple.com/kb/HT1352
    It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option boot will show a lock, and Shift, as well as booting from anything but the Hard Drive.
    Force Removing Password Protection
    1) Add or remove DIMMs to change the total amount of RAM in the computer.
    2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
    http://www.securemac.com/openfirmwarepasswordprotection.php

  • HT1455 G-4 Showing .DS_Store file ?

    I have a .DS_Store file appearing on my desktop.  What is this file and why cant I have trash remove these files?

    They're normally hidden part of OSX/HFS+
    http://www.macupdate.com/info.php/id/10478
    Invisibility Toggler - 1.1...
    http://www.versiontracker.com/dyn/moreinfo/macosx/32246
    InVisibles - 1.5...
    http://www.versiontracker.com/dyn/moreinfo/macosx/14722

  • HT1455 cannot start after a failed Mountain Lion upgrade

    need help on Mountain Lion failed upgrade from Snow Leopard. Cannot repair disc in utilities either.

    You must do this:
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • HT1455 forgot system password how do i reset it running os x 10.6.8

    Forgot system password that I set up how do I reset that password when I cant remember my original password.

    Snow Leopard 10.6 password reset, no disk method
    or #6 here if 10.7 or higher
    ..Step by Step to fix your Mac

  • HT1455 disc error and won't allow me to start up in safe mode.

    Disc error for main HD. My laptop shuts down in the process of rebooting, I can only access disc utility when I hold the option key during startup. I also can't open in safe mode, but I can't remotely access my laptop to remotely access it in safemode  through my other mac because I have remote access turned off. I'm just trying to safely backup my laptop and will reformat the disc. Any advise will be appreciated.
    Thank you,
    Chappie001

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • HT1455 can i use safari in safe mode to reinstall mountain lion

    Can i use Safari in safe mode to reinstall mountain lion os?

    Why not do it from the Recovery partition?
    And, why are you posting this in the Snow Leopard forum?

  • HT1455 computer shuts down for no reason

    computer has started shutting down for no apparent reason. Kid can be playing minecraft or on youtube or i can be browsing internet. bought in june of 2012. thought these were supposed to be bulletproof?

    computer has started shutting down for no apparent reason. Kid can be playing minecraft or on youtube or i can be browsing internet. bought in june of 2012. thought these were supposed to be bulletproof?

  • HT1455 10.8.4 returned from vacation and my finder stops resoponding frequently

    Why does my finder stop responding?
    How do I fix it?

    Yes still have the problem
    This was from the last episode, tried to get all identifying info out.
    2013-08-24 9:00:27.608 PM coreservicesd[68]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=153
    2013-08-24 9:00:27.609 PM NotificationCenter[188]: Connection interrupted.
    2013-08-24 9:00:31.795 PM GoogleSoftwareUpdateDaemon[962]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
    2013-08-24 9:00:32.413 PM WDButtonManager[977]: self-sent 'ascr'/'gdut' event accepted in process that isn't scriptable
    2013-08-24 9:03:15.000 PM bootlog[0]: BOOT_TIME 1377392595 0
    2013-08-24 9:03:27.000 PM kernel[0]: Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    2013-08-24 9:03:27.000 PM kernel[0]: vm_page_bootstrap: 929913 free pages and 110471 wired pages
    2013-08-24 9:03:27.000 PM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
    2013-08-24 9:03:27.000 PM kernel[0]: zone leak detection enabled
    2013-08-24 9:03:27.000 PM kernel[0]: standard timeslicing quantum is 10000 us
    2013-08-24 9:03:27.000 PM kernel[0]: standard background quantum is 2500 us
    2013-08-24 9:03:27.000 PM kernel[0]: mig_table_max_displ = 74
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto kext started!
    2013-08-24 9:03:27.000 PM kernel[0]: Running kernel space in FIPS MODE
    2013-08-24 9:03:27.000 PM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    2013-08-24 9:03:27.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
    2013-08-24 9:03:27.000 PM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    2013-08-24 9:03:27.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    2013-08-24 9:03:27.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
    2013-08-24 9:03:27.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    2013-08-24 9:03:27.000 PM kernel[0]: calling mpo_policy_init for Sandbox
    2013-08-24 9:03:27.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    2013-08-24 9:03:27.000 PM kernel[0]: calling mpo_policy_init for Quarantine
    2013-08-24 9:03:27.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    2013-08-24 9:03:27.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    2013-08-24 9:03:27.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
    2013-08-24 9:03:27.000 PM kernel[0]: MAC Framework successfully initialized
    2013-08-24 9:03:27.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    2013-08-24 9:03:27.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    2013-08-24 9:03:27.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    2013-08-24 9:03:27.000 PM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    2013-08-24 9:03:27.000 PM kernel[0]: [ PCI configuration begin ]
    2013-08-24 9:03:27.000 PM kernel[0]: console relocated to 0xf80010000
    2013-08-24 9:03:27.000 PM kernel[0]: PCI configuration changed (bridge=3 device=1 cardbus=0)
    2013-08-24 9:03:27.000 PM kernel[0]: [ PCI configuration end, bridges 7 devices 17 ]
    2013-08-24 9:03:27.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May  1 2013) initialization complete
    2013-08-24 9:03:27.000 PM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    2013-08-24 9:03:27.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    2013-08-24 9:03:27.000 PM kernel[0]: rooting via boot-uuid from /chosen: C3CA7225-697D-3596-BC04-4BDC25066031
    2013-08-24 9:03:27.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    2013-08-24 9:03:27.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    2013-08-24 9:03:27.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    2013-08-24 9:03:27.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    2013-08-24 9:03:27.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    2013-08-24 9:03:27.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    2013-08-24 9:03:27.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002332fffe0d57fa; max speed s800.
    2013-08-24 9:03:27.000 PM kernel[0]: BTCOEXIST off
    2013-08-24 9:03:27.000 PM kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
    2013-08-24 9:03:27.000 PM kernel[0]: 5.10.131.36
    2013-08-24 9:03:27.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/Hitachi HDS721075KLA360 Media/IOGUIDPartitionScheme/Customer@2
    2013-08-24 9:03:27.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 2
    2013-08-24 9:03:27.000 PM kernel[0]: jnl: unknown-dev: replay_journal: from: 3028992 to: 6748160 (joffset 0x1087d000)
    2013-08-24 9:03:27.000 PM kernel[0]: jnl: unknown-dev: journal replay done.
    2013-08-24 9:03:27.000 PM kernel[0]: Kernel is LP64
    2013-08-24 9:03:27.000 PM kernel[0]: hfs: Removed 10 orphaned / unlinked files and 35 directories
    2013-08-24 9:03:27.000 PM kernel[0]: AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
    2013-08-24 9:03:27.000 PM kernel[0]: AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
    2013-08-24 9:03:19.819 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
    2013-08-24 9:03:19.819 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    2013-08-24 9:03:27.552 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    2013-08-24 9:03:37.417 PM hidd[49]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    2013-08-24 9:03:37.424 PM hidd[49]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    2013-08-24 9:03:37.424 PM fseventsd[50]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (113044 22 113165)
    2013-08-24 9:03:37.425 PM fseventsd[50]: log dir: /.fseventsd getting new uuid: 49A167B3-92BF-4366-8F91-59E105316021
    2013-08-24 9:03:37.000 PM kernel[0]: macx_swapon SUCCESS
    2013-08-24 9:03:38.000 PM kernel[0]: yukon: Ethernet address 00:23:32:96:13:27
    2013-08-24 9:03:38.000 PM kernel[0]: AirPort_Brcm43224: Ethernet address 00:23:12:1b:d2:b3
    2013-08-24 9:03:38.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    2013-08-24 9:03:40.000 PM kernel[0]: Waiting for DSMOS...
    2013-08-24 9:03:40.444 PM kdc[47]: label: default
    2013-08-24 9:03:40.444 PM kdc[47]:           dbname: od:/Local/Default
    2013-08-24 9:03:40.444 PM kdc[47]:           mkey_file: /var/db/krb5kdc/m-key
    2013-08-24 9:03:40.444 PM kdc[47]:           acl_file: /var/db/krb5kdc/kadmind.acl
    2013-08-24 9:03:41.352 PM mDNSResponder[41]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
    2013-08-24 9:03:43.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
    2013-08-24 9:03:43.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    2013-08-24 9:03:43.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x820F FirmwareVersion - 0x0201
    2013-08-24 9:03:43.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    2013-08-24 9:03:43.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    2013-08-24 9:03:43.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    2013-08-24 9:03:43.000 PM kernel[0]: ** Device in slot: SLOT--1 **
    2013-08-24 9:03:43.000 PM kernel[0]: Previous Shutdown Cause: 3
    2013-08-24 9:03:43.000 PM kernel[0]: DSMOS has arrived
    2013-08-24 9:03:43.875 PM coreservicesd[68]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    2013-08-24 9:03:43.906 PM blued[58]: Read the UHE Info
    2013-08-24 9:03:43.907 PM blued[58]: Read version 2 info.  Number of devices:1
    2013-08-24 9:03:43.907 PM blued[58]: Class of device:     0x2580
    2013-08-24 9:03:43.907 PM blued[58]: Device name: ' ' length:23
    2013-08-24 9:03:43.907 PM blued[58]: Finished reading the HID data
    2013-08-24 9:03:43.908 PM blued[58]: Found a device with PID:0x030d VID:0x05ac
    2013-08-24 9:03:44.101 PM airportd[78]: _processDLILEvent: en1 attached (down)
    2013-08-24 9:03:44.000 PM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    2013-08-24 9:03:44.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    2013-08-24 9:03:44.196 PM configd[17]: network changed.
    2013-08-24 9:03:44.198 PM configd[17]: setting hostname to "  -iMac-2.local"
    2013-08-24 9:03:45.323 PM mds[40]: (Normal) FMW: FMW 0 0
    2013-08-24 9:03:46.931 PM com.apple.SecurityServer[16]: Session 100000 created
    2013-08-24 9:03:53.000 PM kernel[0]: fsevents: watcher SmartwareServerA (pid: 62) - Using /dev/fsevents directly is unsupported.  Migrate to FSEventsFramework
    2013-08-24 9:03:53.000 PM kernel[0]: [BNBMouseDevice::init][75.19] init is complete
    2013-08-24 9:03:53.000 PM kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
    2013-08-24 9:03:53.000 PM kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    2013-08-24 9:03:54.056 PM com.apple.SecurityServer[16]: Entering service
    2013-08-24 9:03:54.156 PM appleeventsd[55]: main: Starting up
    2013-08-24 9:03:54.261 PM mDNSResponder[41]: D2D_IPC: Loaded
    2013-08-24 9:03:54.261 PM mDNSResponder[41]: D2DInitialize succeeded
    2013-08-24 9:03:54.266 PM mDNSResponder[41]: Adding registration domain 1010781033.members.btmm.icloud.com.
    2013-08-24 9:03:54.000 PM kernel[0]: [AppleMultitouchDevice::start] entered
    2013-08-24 9:03:54.284 PM configd[17]: network changed: DNS*
    2013-08-24 9:03:54.287 PM configd[17]: network changed: DNS*
    2013-08-24 9:03:54.307 PM kdc[47]: PKINIT: failed to find a signing certifiate with a public key
    2013-08-24 9:03:54.540 PM com.apple.usbmuxd[29]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    2013-08-24 9:03:54.573 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    2013-08-24 9:03:54.680 PM kdc[47]: KDC started
    2013-08-24 9:03:54.790 PM loginwindow[44]: Login Window Application Started
    2013-08-24 9:03:54.977 PM locationd[45]: NOTICE,Location icon should now be in state 0
    2013-08-24 9:03:55.050 PM WindowServer[96]: Server is starting up
    2013-08-24 9:03:55.067 PM WindowServer[96]: Session 256 retained (2 references)
    2013-08-24 9:03:55.067 PM WindowServer[96]: Session 256 released (1 references)
    2013-08-24 9:03:55.070 PM systemkeychain[70]: done file: /var/run/systemkeychaincheck.done
    2013-08-24 9:03:55.153 PM awacsd[59]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
    2013-08-24 9:03:55.199 PM digest-service[101]: label: default
    2013-08-24 9:03:55.200 PM digest-service[101]:           dbname: od:/Local/Default
    2013-08-24 9:03:55.200 PM digest-service[101]:           mkey_file: /var/db/krb5kdc/m-key
    2013-08-24 9:03:55.200 PM digest-service[101]:           acl_file: /var/db/krb5kdc/kadmind.acl
    2013-08-24 9:03:55.203 PM digest-service[101]: digest-request: uid=0
    2013-08-24 9:03:55.271 PM rpcsvchost[107]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    2013-08-24 9:03:55.286 PM digest-service[101]: digest-request: init request
    2013-08-24 9:03:55.293 PM digest-service[101]: digest-request: init return domain: BUILTIN server:
    2013-08-24 9:03:55.341 PM WindowServer[96]: Session 256 retained (2 references)
    2013-08-24 9:03:55.353 PM WindowServer[96]: init_page_flip: page flip mode is on
    2013-08-24 9:03:55.393 PM awacsd[59]: ConduitMultiClientPlus: Could not get encoded salted hashed password
    2013-08-24 9:03:55.435 PM awacsd[59]: Configuring lazy AWACS client: 1010781033.p02.members.btmm.icloud.com.
    2013-08-24 9:03:55.444 PM netbiosd[79]: Unable to start NetBIOS name service:
    2013-08-24 9:03:55.575 PM apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    2013-08-24 9:03:55.576 PM apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    2013-08-24 9:03:56.000 PM kernel[0]: en1: 802.11d country code set to 'CA'.
    2013-08-24 9:03:56.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 132 136 140 149 153 157 161 165
    2013-08-24 9:03:57.368 PM WindowServer[96]: mux_initialize: Couldn't find any matches
    2013-08-24 9:03:57.385 PM WindowServer[96]: GLCompositor enabled for tile size [256 x 256]
    2013-08-24 9:03:57.385 PM WindowServer[96]: CGXGLInitMipMap: mip map mode is on
    2013-08-24 9:03:57.424 PM WindowServer[96]: WSMachineUsesNewStyleMirroring: false
    2013-08-24 9:03:57.425 PM WindowServer[96]: Display 0x04271ac0: GL mask 0x1; bounds (0, 0)[1680 x 1050], 36 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c6b, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009c6b0000000004271ac0
    2013-08-24 9:03:57.425 PM WindowServer[96]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    2013-08-24 9:03:57.433 PM WindowServer[96]: Created shield window 0x5 for display 0x04271ac0
    2013-08-24 9:03:57.433 PM WindowServer[96]: Created shield window 0x6 for display 0x003f003d
    2013-08-24 9:03:57.436 PM WindowServer[96]: Display 0x04271ac0: GL mask 0x1; bounds (0, 0)[1680 x 1050], 36 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c6b, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009c6b0000000004271ac0
    2013-08-24 9:03:57.436 PM WindowServer[96]: Display 0x003f003d: GL mask 0x2; bounds (2704, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    2013-08-24 9:03:57.437 PM WindowServer[96]: CGXPerformInitialDisplayConfiguration
    2013-08-24 9:03:57.437 PM WindowServer[96]:   Display 0x04271ac0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9c6b S/N 0 Dimensions 17.05 x 10.63; online enabled built-in, Bounds (0,0)[1680 x 1050], Rotation 0, Resolution 1
    2013-08-24 9:03:57.437 PM WindowServer[96]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2704,0)[1 x 1], Rotation 0, Resolution 1
    2013-08-24 9:03:57.472 PM WindowServer[96]: GLCompositor: GL renderer id 0x01021a02, GL mask 0x00000003, accelerator 0x00003a73, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
    2013-08-24 9:03:57.472 PM WindowServer[96]: GLCompositor: GL renderer id 0x01021a02, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    2013-08-24 9:03:57.476 PM loginwindow[44]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    2013-08-24 9:03:57.878 PM WindowServer[96]: Created shield window 0x7 for display 0x04271ac0
    2013-08-24 9:03:57.878 PM WindowServer[96]: Display 0x04271ac0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
    2013-08-24 9:03:57.968 PM launchctl[119]: com.apple.findmymacmessenger: Already loaded
    2013-08-24 9:03:58.045 PM com.apple.SecurityServer[16]: Session 100003 created
    2013-08-24 9:03:58.165 PM loginwindow[44]: Login Window Started Security Agent
    2013-08-24 9:03:58.442 PM SecurityAgent[127]: This is the first run
    2013-08-24 9:03:58.443 PM SecurityAgent[127]: MacBuddy was run = 0
    2013-08-24 9:03:58.502 PM coreaudiod[128]: Enabled automatic stack shots because audio IO is inactive
    2013-08-24 9:03:59.435 PM WindowServer[96]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    2013-08-24 9:03:59.489 PM WindowServer[96]: Display 0x04271ac0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
    2013-08-24 9:03:59.528 PM WindowServer[96]: Display 0x04271ac0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
    2013-08-24 9:04:00.498 PM UserEventAgent[120]: cannot find useragent 1102
    2013-08-24 9:04:00.511 PM locationd[138]: NOTICE,Location icon should now be in state 0
    2013-08-24 9:04:06.900 PM SecurityAgent[127]: User info context values set for
    2013-08-24 9:04:08.017 PM authorizationhost[139]: Failed to authenticate user < > (error: 9).
    2013-08-24 9:04:09.303 PM warmd[28]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke_0:2321] Unable to open i386 shared cache: 2 No such file or directory
    2013-08-24 9:04:11.804 PM SecurityAgent[127]: User info context values set for
    2013-08-24 9:04:12.304 PM SecurityAgent[127]: Login Window login proceeding
    2013-08-24 9:04:12.766 PM loginwindow[44]: Login Window - Returned from Security Agent
    2013-08-24 9:04:12.797 PM loginwindow[44]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    2013-08-24 9:04:12.833 PM loginwindow[44]: USER_PROCESS: 44 console
    2013-08-24 9:04:13.023 PM com.apple.launchd.peruser.501[140]: (com.apple.gamed) Ignored this key: UserName
    2013-08-24 9:04:13.023 PM com.apple.launchd.peruser.501[140]: (com.apple.gamed) Ignored this key: GroupName
    2013-08-24 9:04:13.024 PM com.apple.launchd.peruser.501[140]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    2013-08-24 9:04:13.030 PM loginwindow[44]: Connection with distnoted server was invalidated
    2013-08-24 9:04:13.119 PM distnoted[145]: # distnote server agent  absolute time: 58.494680158   civil time: Sat Aug 24 21:04:13 2013   pid: 145 uid: 501  root: no
    2013-08-24 9:04:13.455 PM WindowServer[96]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    2013-08-24 9:04:13.748 PM blued[58]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    2013-08-24 9:04:13.817 PM WDButtonManager[153]: self-sent 'ascr'/'gdut' event accepted in process that isn't scriptable
    2013-08-24 9:04:13.830 PM WindowServer[96]: Display 0x04271ac0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
    2013-08-24 9:04:14.498 PM locationd[159]: NOTICE,Location icon should now be in state 0
    2013-08-24 9:04:15.200 PM com.apple.SecurityServer[16]: Session 100005 created
    2013-08-24 9:04:20.410 PM talagent[158]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
    2013-08-24 9:04:20.417 PM talagent[158]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
    2013-08-24 9:04:20.617 PM com.apple.launchd.peruser.501[140]: (com.apple.afpstat-qfa[187]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
    2013-08-24 9:04:20.617 PM com.apple.launchd.peruser.501[140]: (com.apple.afpstat-qfa[187]) Job failed to exec(3) for weird reason: 2
    2013-08-24 9:04:20.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=188[GoogleSoftwareUp] clearing CS_VALID
    2013-08-24 9:04:21.215 PM loginwindow[44]: Login items - LSOpenApplication returned error -10665, url=/Applications/Palm/Transport Monitor
    2013-08-24 9:04:21.215 PM loginwindow[44]: Unable to lauch startup item: (null)
    2013-08-24 9:04:21.216 PM loginwindow[44]: Login items - LSOpenApplication returned error -10665, url=/Applications/WD Backup.app/Contents/Resources/WDBackupMonitor.app
    2013-08-24 9:04:21.216 PM loginwindow[44]: Unable to lauch startup item: (null)
    2013-08-24 9:04:21.890 PM com.apple.launchd.peruser.501[140]: (com.apple.mrt.uiagent[178]) Exited with code: 255
    2013-08-24 9:04:21.989 PM WindowServer[96]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
    2013-08-24 9:04:22.231 PM Adobe Reader Updater Helper[190]: Adobe Reader Updater encountered errorCode 260
    2013-08-24 9:04:22.308 PM Adobe Reader Updater Helper[190]: Adobe Reader Updater encountered errorCode 1001
    2013-08-24 9:04:22.430 PM NetworkBrowserAgent[207]: Starting NetworkBrowserAgent
    2013-08-24 9:04:22.484 PM apsd[167]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
    2013-08-24 9:04:22.716 PM GoogleSoftwareUpdateDaemon[209]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
              com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
              com.google.Keystone.Daemon.Administration: 0 connection(s)
    2013-08-24 9:04:22.718 PM GoogleSoftwareUpdateDaemon[209]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
              com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
              com.google.Keystone.Daemon.Administration: 1 connection(s)
    2013-08-24 9:04:22.724 PM GoogleSoftwareUpdateDaemon[209]: -[KSDaemonAdministration(PrivateMethods) ticketsAllowUninstallWithError:] KSDaemonAdministration system Keystone will not uninstall with active tickets.
    2013-08-24 9:04:22.725 PM GoogleSoftwareUpdateDaemon[209]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
              com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
              com.google.Keystone.Daemon.Administration: 0 connection(s)
    2013-08-24 9:04:22.736 PM GoogleSoftwareUpdateDaemon[209]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
              com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
              com.google.Keystone.Daemon.Administration: 0 connection(s)
    2013-08-24 9:04:22.840 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
    2013-08-24 9:04:22.854 PM GoogleSoftwareUpdateDaemon[209]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
    2013-08-24 9:04:22.909 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
              <KSTicket:0x5d98a10
                        productID=com.google.Keystone
                        version=1.1.0.3659
                        xc=<KSPathExistenceChecker:0x5d9ab20 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
                        serverType=Omaha
                        url=https://tools.google.com/service/update2
                        creationDate=2010-06-26 15:36:58
              >
    Using server: <KSOmahaServer:0x697ed30
              engine=<KSDaemonUpdateEngine:0x5d8f0f0>
              params={
                        EngineVersion = "1.1.0.3659";
                        ActivesInfo = {
                                  "com.google.Keystone" = {
                                            LastActivePingDate = 2013-08-23 07:00:00 +0000;
                                            LastActiveDate = 2013-08-25 01:04:22 +0000;
                                            LastRollCallPingDate = 2013-08-23 07:00:00 +0000;
                                  "com.google.macphotouploader" = {
                                            LastRollCallPingDate = 2013-08-23 07:00:00 +0000;
                        UserInitiated = 0;
                        IsSystem = 1;
                        OmahaOSVersion = "10.8.4_i486";
                        Identity = KeystoneDaemon;
                        AllowedSubdomains = (
                                  ".omaha.sandbox.google.com",
                                  ".tools.google.com",
                                  ".www.google.com",
                                  ".corp.google.com"
    2013-08-24 9:04:22.926 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x69866f0
              server=<KSOmahaServer:0x697ed30>
              url="https://tools.google.com/service/update2"
              runningFetchers=0
              tickets=1
              activeTickets=1
              rollCallTickets=1
              body=
                        <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
                        <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
                            <o:os platform="mac" version="MacOSX" sp="10.8.4_i486"></o:os>
                            <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="1155" brand="GGLG">
                                <o:ping r="1" a="1"></o:ping>
                                <o:updatecheck></o:updatecheck>
                            </o:app>
                        </o:gupdate>
    2013-08-24 9:04:23.081 PM WindowServer[96]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 2.09 seconds (server forcibly re-enabled them after 1.00 seconds)
    2013-08-24 9:04:26.581 PM _networkd[214]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
    2013-08-24 9:04:29.922 PM _networkd[220]: Unable to resolve hostname(s)
    2013-08-24 9:04:30.274 PM GoogleSoftwareUpdateDaemon[209]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009]
    2013-08-24 9:04:30.275 PM GoogleSoftwareUpdateDaemon[209]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone) [com.google.UpdateEngine.CoreErrorDomain:702 - 'https://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009])
    2013-08-24 9:04:30.278 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
    2013-08-24 9:04:30.901 PM GoogleSoftwareUpdateDaemon[209]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
    2013-08-24 9:04:30.903 PM GoogleSoftwareUpdateDaemon[209]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
    2013-08-24 9:04:30.904 PM GoogleSoftwareUpdateDaemon[209]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
    2013-08-24 9:04:30.996 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
    2013-08-24 9:04:31.006 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
    2013-08-24 9:04:31.011 PM GoogleSoftwareUpdateDaemon[209]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
    2013-08-24 9:04:31.107 PM ntpd[98]: proto: precision = 1.000 usec
    2013-08-24 9:04:31.514 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateCheckAction performAc

  • HT1455 My iMac stucked at loading screen( Spinning gear )..

    My iMac stucked at loading screen( Spinning gear ), i tried everything including reboot process while pressing shift key in keyboard but it is not responding, please help me with this. thanks in advance.

    You might try the following:
    I would first reset the SMC:
    Shut down and unplug the Mac.
    Keep the Mac unplugged for at least fifteen seconds.
    Plug the Mac back in and do not turn it back on for at least five seconds.
    Press the power button to turn the Mac back on.
    Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
    Hope this helps

Maybe you are looking for