HT1459 i cant read the serial number
its been awhile ago and i was updateing my touch and it shutdown and when i go to charge it , it will show the battery and then the apple and then turn off i was told that i lost my opertating system and i wanted to know if it was fix able
If you cannot remember the passcode, you will need to Restore your device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Similar Messages
-
HT1459 I CANT GET THE SERIAL NUMBER
im trying to dwnload itunes on my laptop and it wont download
Basics from the manual are restart, reset, restore
Try those
iPod: How to find the serial number -
HT1459 i cant get the serial number bc its disabled and i cant read it onthe back bc its scratched
my son changed his password on his ipod and couldn't remember it, now it is disabled. i have tried to remove it using find my iphone, but it is offlile. how do i fix this?
Hello Jesslocko,
Before following the iPad Restore process make sure you have updated version of iTunes installed on your computer, to check that Open iTunes on your computer click on Help and then check for updates ( If there is any updates available then Install it ) and If you do not have iTunes Installed or if you want to directly update the version of your iTunes then Download and Install iTunes from here : http://www.apple.com/itunes/download/
1. Make sure your device (iPad) is unplugged (Disconnected) from your computer (this should be the computer that you use to sync your iPad or you can use any other computer with iTunes installed in it). You can leave the USB cable connected to your iPad though.
2. Turn off your iPad. Press and hold the power button on the top edge until a slider appears. Slide it from left to right to power off your device. If the slider doesn't appear (because your iOS device has frozen up) then hold the power and Home buttons down until the iPhone or iPad turns off.
3. Ensure your device has a decent amount of charge. Leave it plugged in to the mains for 10 minutes or so if you see the flat battery icon. (iPad low battery)
4. Hold down the Home button (the round button at the bottom of your iPad screen) and connect the other end of USB cable to the computer this should cause your iPhone or iPad to turn on. Keep holding the Home button until you see the iTunes and USB cable images on your iPad screen, then release the button.(iPad recovery mode)
5. In iTunes (launch the application if it isn't running on your Computer), you should see a message saying an iPad has been found in recovery mode.
6. Click OK and then click on Restore to bring your iPad to Factory settings -
my daughter put a pass code on her i pod and she cant remember it how can i resolve this and i can not read the serial number its to faded and scratched
If you cannot remember the passcode, you will need to Restore your device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
I cant enter the serial number i received when i bought the product from softwareking
i cant enter the serial number i received when i bought the product from softwareking
May I ask
1. What they charged?
2. What exact product and version?
3. What message you get?
Please don't post the serial number! -
I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html -
i purchased final cut pro studio but i reinstalled my os and cant final the serial number what can I do
http://support.apple.com/kb/HT3866?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/ht1861
MtD -
Reading the serial number of a VXI-MXI-2 through software
Is there a way to read the serial number of my VXI MXI 2 through software? I can find the model number and manufacturer number in the registers, but no serial number.
I think the short answer is no, there's not a way. Getting things like the model and manufacturer number are inherent in the design of VXI - so an API can support it for any vendor. But the serial number is not something inherent in the design of VXI - so no API can expose that in a consistent fashion for all devices.
Some instrument drivers do have a method for retrieving a device's serial number. But since the VXI-MXI-2 is more of a controller than a normal device (technically it's actually an extender, but close enough) there isn't an instrument driver for it.
The serial number is also part of the response string for 488.2 compliant message based devices - but again, this is not a message based device.
There is, however, something that may help you
. If you need to manually find the serial number, then you should use Measurement & Automation Explorer (MAX), right-click on the VXI-MXI-2, and choose Hardware Configuration. The serial number should be displayed in the title bar of the popup configuration dialog.
But I don't think there's a way to get this programmatically.
Dan Mondrik
National Instruments -
HT4061 i CANNOT READ THE SERIAL NUMBER, but I need help - icloud has locked up my email
Yesterday tech support had me load iCloud onto my computer and now my Outlook won't work
Marceta wrote:
Yesterday tech support had me load iCloud onto my computer and now my Outlook won't work
And how is this related to an iPhone or the inabliity to read the serial number? -
after my trial version, i bought a month licence for premiere pro, but i cant get the serial number to activate it
There are no serial numbers for CC plans.
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
I rubbed the iTunes gift card back off, I was unable to read the serial number as part of it came off, can any one help.
If the page that you posted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
How do you read the Serial Number on the back of the Airport Express? It is sop small and silver writing on white background?
http://support.apple.com/kb/ht3546
-
How to read the serial number of PXI Module in my C/C++ program.
I am using PXI NI-FGEN controlling it by my C/C++ program. I would like to read the serial number of the hardware. Are there any methods to do it ?
Actually I could not find any functions and attributes in the programming manual. So I am posting this as the last chance. For example, it looks possible to me if we can access NI-MAX in my C/C++ program. Because NI-MAX displays the serial number.
Any information would be appreciated.It looks like your answer is in the NI-FGEN help file. Go to NI-FGEN -> Documentation -> NI Signal Generators Help
From that help the inforamtion you are looking for is under the following heading:
NI Signal Generators Help
+Programming
+NI-FGEN Help
+C Reference
+Attributes
+Instrument-Specific Attributes
?NIFGEN_ATTR_SERIAL_NUMBER
I hope this is what you're looking for,
Ross Mau
NI Applications Engineer -
i cant find the serial number
Where have you looked?
Did you check under the sofa?
How about inside the little treasure chest in the fish tank?
Did your dog bury it somewhere?
Have you tried the new iPad app... Find my Serial Number? -
i lost my ipod 5 and i cant remember my serial number i need help with my serial number
Finding serial number for a device - https://discussions.apple.com/message/18246553 - from box or backup file, not from Apple.
http://support.apple.com/kb/HT2526 - If you registered a device you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
My Support Profile - https://supportprofile.apple.com/MySupportProfile.do
Maybe a way to find serial number after a device is no longer in your possession - https://discussions.apple.com/message/19524469 - "The easiest way to find your serial number is this Open Itunes...click help... run diagnostics.....(tick or untick as necessary) so that you just have ticked the last two, device connectivity and device sync. run these tests. it will say no ipod/ipad found but will give results of test....scroll down to bottom of results... here you will find the serial number of your last attached devices."
iPhone: Locating the serial number, IMEI, ICCID, or MEID - http://support.apple.com/kb/HT1267 - from phone itself, a computer to which it has been backed up, or packaging.
Maybe you are looking for
-
Hi, I am new to XI and I want to know about Alerts in detail, Please any one help me in knowing 1.How to check what all alerts have been configured,if any transaction available please let me know the steps to check them. 2.Any blogs which explain in
-
How to accumlate resultsets in ref cursor
Hello I have 3 cursor which query on different tables and return the same columns. I need to accumulate the result set of 3 cursors into a single ref cursor. Is this possible. If so how. regards, Ravi Narala
-
QuickTime only plays videos when the program itself is started
Hi there. When I open a file in QuickTime and the program hasn't been started before, everything works like a charm. Do I close the video then, though, and try to open another one while the program itself is still running in the background, then it w
-
Why can I only see my Camera Roll when uploading photos?
Trying to upload pictures to Facebook but when I click the camera I can only see the camera roll, can't see any of my albums. Any help would be appreciated.
-
Can I email itunes support my question instead of calling them?
Can I email itunes my question instead of calling them, I really don't want to talk to anyone...