HT1459 My ipod touch has a passcode on i forgot it and told me to connect to itunes but i still don't know how?
My ipod touch has a passcode on i forgot it and told me to connect to itunes but i still don't know how?
athipath wrote:
told me to connect to itunes but i still don't know how?
Plug the sync cable into the device and the computer. Not really that difficult.
To remove the passcode, do as the User's Guide says, restore the device.
Similar Messages
-
I have a 2nd generation iPod that won't do anything but display the Apple logo for a brief second then an image of the cord suggesting it should be connected to iTunes. I tried to restore it via iTunes but I get an Error: 1611. It does nothing else. I tried turning off using both buttons...nothing. Any suggestions?
Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Above from:
http://support.apple.com/kb/TS3694#error1611
Note it could be a hardware problem -
I seem to have fried my ipad--i went to itunes to update it and now it wont do anything? the ipad has a picture of a usb cable and it says to connect to itunes but when I do it does not show up as a device??
You'll want to completely restore the device using iTunes.
http://support.apple.com/kb/ht1414
Keep in mind, at this point anything you had on the iPad you did not backup to iCloud or your computer is most likely lost.
It may be best to contact AppleCare by phone from 7am-10pm Central if you need more help on the matter. -
My daughter's ipod touch has been disabled because she forgot her password. It also will not connect to itunes because it's been disabled. How can I just erase or reset the ipod so she can use it? We don't mind if the info. on the ipod is lost.
Hi Guys,
I havent touched my Iphone 4s in ages (about a month). I came back to it the other day. I forgot the password, so naturally it disabled it and is telling me to connect to iTunes. In the meantime, i had got a new computer and didnt back up the itunes files (because im an idiot). So now when i connect it to iTunes it tells me to verify it on the phone, but i cant get in there because it is disabled. PLEASE SOMEONE HELP!!! I HAVE NO IDEA ON HOW TO FIX IT!! I've tried to restore it, I've tried to jailbreak it. NOTHING works!! PLEASE HELP!!! -
so i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over wifi or when connected to itunes. how can i fix this?
You say you have iOS 7 beta. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own since you have a bootleg copy
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog -
My ipod touch is disabled and it says to connect to itunes but itunes says it can't sync because it is locked. Any way to unlock and keep data? (apps, gaming levels, music).
Hi,
Take it to you nearest Apple Store and see what they have to say. You should back up you data before you go in but in your case you can not.
xxmitchxx90 -
We have an ipod touch, 3rd generation, 8GB. we lost the unlock code. we now try recovery via itunes, but can't connect to the ipod software update server. any suggestions?
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
my i phone has a passcode onit so it will not allow me to connect to itunes my phone has froze and dosent allow me to type in my passcode what shall i do?!!!
Check here http://support.apple.com/kb/HT1808
-
My Ipod is saying "Ipod is disable connect to itunes" but I have done that and nothing is happening, no prompts, nothing! what can I do?
Welcome to the Apple Support Communities
See > http://support.apple.com/kb/HT1212 -
My ipod says it is disabled and tells me to connect to itunes but nothing is happening how do I fix it
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
can't start up my ipod 5thG and stay remining the logo of apple for too long don't know how to do????
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod is disabled and told me to connect to itunes now what do i do?
my ipod is disable and told me to connect to itunes now what do i do?
Do as the manual says to do and restore the ipod.
If you are unable to restore, then type "unable to restore" into the search bar at the top of this page by Support and read the resulting help article. -
i forgot my passcode on my iphone5 and it says to connect to itunes, but it didn't work!!!
You have to restore the device after you connect to iTunes. It does not just magically open. See this support document http://support.apple.com/kb/HT1212
-
I am trying to restore my password. I followed the steps for doing so when you have never synched the ipod to your computer. I got so far as the 4th step when my ipod told me to connect to itunes. The last step is itunes is suppose alert me that it senses a device going through recovery mode. It never did that. I also just downloaded the latest itunes so what do I do now? Im only 10 and find this really confusing. But Im trying
Place the iPod in recovery mode and restore via iTunes on your computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I just repaired my sons ipod touch and it is passcode protected and he dosent remember the passcode and it says to go to itunes and that does nothing does anyone know what I can do?
If you can't remember the passcode then you will need to restore the device. http://support.apple.com/kb/HT1414
Maybe you are looking for
-
Hi all, I'm trying to make a package of Vis to easily make Excel reports with Signal Express. I'm working on LabVIEW 8.2.1. I'm using the report generation toolkit, so I build a .llb from my project which contains all the hierarchy of my steps, but a
-
How can I call functions from a SWF loaded in to another SWF?
Hi there, Please excuse my ignorance, I am very new to actionscript and flash. I have 2 SWF's - a.swf and b.swf. I load b.swf into a.swf with the following code: var swfLoader:MovieClipLoader = new MovieClipLoader(); swfLoader.loadClip("b.swf", conta
-
Balance in trasation currency in j1IIN
Hi, I am getting the following error while saving the Excise Invoice in J1IIN. Balance in transaction currency Message no. F5702 Diagnosis A balance has occurred in transaction currency 'INR' with the following details: Exchange rate '00', amount '
-
An external drive for my MacBook 13-inch Aluminium (Late 2008)
My 250GB x 2.4GHz MacBook with 2GB RAM now only has 87 GB available. I'm sure that the main reason for this is the 15,000 + images I have saved in iPhoto. Of course, it's pretty slow to do anything at all these days, too, so I'm thinking I'll take ad
-
Publishing JSP form JAVA stored procedure [Oracle8i 8.1.7]
Hi folks, I wonder if anybody knows a way to publish JSP from JAVA stored procedure. I know there is a way to load java class using PL/SQL package DBMS_JAVA.loadjava(), or oracle.aurora.server.tools.loadjava.LoadJavaMain.serverMain() from java. But I