HT1461 office installation problem on mac

i have recently bought office 2013 for home office and students. the system required that i need to have minimum OSX 10.5.3 or up version while i am using OSX 10.9.2 which i believe is higher versions. but still the system is not allowing it to install on my computer.

Office 2013 is a windoze suite. The latest for Macs is Office 2011 or Office 365 (the rent an app version).

Similar Messages

CS4 Installation Problem on Mac - Error 2

I have tried for several hours to make the new install of Adobe CS4 work. The Lightroom2 install worked fine. Background: I have a macbook pro, OS/X 10.5.7, enough avail disk space. I had a trial version of LR2 and full CS2. I have done the following: checked "repair permissions" - an OS/X utility that interfered with operating Capture NX a couple years ago, so I added that step. I have uninstalled every Adobe application, using Clean Script 3 and Clean Script 4. I have tried to install CS4 in a separate user account, which has since been deleted, and again both Clean Scripts have been run. I have restarted my computer and downloaded a fresh version of CS4. I have tired to install it as a Tial version instead of an upgrade, also. It NEARLY installs, but at the very end of the install bar, after Bridge and before finishing Photoshop installation, I get a big red X and an error and find it is Error 2. The Adobe support pdf's have not helped, including those referenced by their little support bot.
Have spent a couple hours with Adobe Support, also. No one knows what Error 2 means.
Also, the "support" person closed my case as though it had been resolved - said he would call me back in one hour and 2ours 45 minutes later had not called back. He CLOSED the case, wasting my time and lying to me.

I have just committed the cardinal sin of allowing my daughter to install Adobe CS4 Web Premium on my new Mac Pro 2.26 8 Core.
I use this computer for pro music composition, and until I allowed my daughter to talk me into letting her use it for Adobe Web Premium (24" Apple screen, she has a PC laptop), it was strictly a no fly zone.
My worst fears were realized.
Neither she, nor I, can't get a clean install. Each attempt is greeted by a 'Successful but with Errors' or some such garbage. I have submitted a support requerst but have had no reply.
The new Mac died. Apple replaced it with a new computer under Applecare Warranty, and a new hard disk, but still the problem remains.
I've tried a new partition; nope.
I get the folling error codes:
Adobe CSI CS4
Error:
Error 2.
Adobe Device Central CS4
Error:
Error 2.
Adobe Drive CS4
Error:
Error 2.
Adobe Extension Manager CS4
Error:
Error 2.
Adobe Flash CS4 STI-en
Error:
Error 2.
Adobe Media Encoder CS4
Error:
Error 2.
Adobe Media Encoder CS4 Importer
Error:
Error 2.
Adobe Output Module
Error:
Error 2.
Adobe Soundbooth CS4 Codecs
Error:
Error 2.
Adobe Version Cue CS4 Server
Error:
Error 2.
Photoshop Camera Raw
Error:
Error 2.
I tried to download the Adobe Support Advisor, but it would not download. I have erased the registration, followed the instructions to the letter.
Nothing.
Adobe help in Australia were polite but did not resolve the problem. I called again and was greeted by a call centre somewhere in the Third World by someone who knew less about computers that they did about Adobe products. This poor person probably has a good job within his impoverished community, but undoubtedly paid a pittance (or why would Adobe set up a Call Centre in India), which make s it really hard to vent my frustrations without appearing racist.
I am attempting to take over the problem as there is no way a seventeen year old girl could negotiate this. I can't.
Has anybody any clues?
Appreciate any help. I can't access my daughter's email which the product is registered through at Adobe, as it is on her school computer which is connected through the school server, but my email is [email protected].
Appreciate any help. Or the contact details of a good hit-man.
Simon Binks
[email protected]

Java 7 (1.7.0_17) installation problem on Mac OSX

Hi,
I tried to install jdk-7u17-macosx-x64.dmg from the oracle site and the installer said that the installation was successful. It installed it under the following directory with the listed contents:
/Library/Java/JavaVirtualMachines/jdk1.7.0_17.jdk/Contents
drwxrwxr-x 15 root wheel 510 10 Apr 16:18 Home
-rw-rw-r-- 1 root wheel 1577 2 Mar 02:10 Info.plist
drwxrwxr-x 3 root wheel 102 10 Apr 16:18 MacOS
This installation seems to be incomplete. When I installed 1.6.0, I can see the following:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents
drwxr-xr-x 12 root wheel 408 20 Feb 22:31 Classes
drwxr-xr-x 41 root wheel 1394 20 Feb 22:31 Commands
drwxr-xr-x 6 root wheel 204 20 Feb 22:31 Home
-rw-r--r-- 1 root wheel 1963 20 Feb 22:31 Info.plist
drwxr-xr-x 50 root wheel 1700 20 Feb 22:31 Libraries
drwxr-xr-x 3 root wheel 102 20 Feb 22:31 MacOS
drwxr-xr-x 32 root wheel 1088 10 Nov 12:37 Resources
-rw-r--r-- 1 root wheel 462 20 Feb 22:31 version.plist
When I try to use the 1.7 installation in IntelliJ, it cant find classes.jar, and thus any of the java classes..
The compiler flags red all over the project.
I tried installing jdk-7u15-macosx-x64.dmg and I still get the same problem.
Any idea what could be going wrong? Im running a MacBook Air with Mac OS X 10.7.5
Thanks.

This got solved by upgrading my IntelliJ from 10.5 to 12.1 CE. It appears that Oracle may have made some changes to the Java 1.7 installable, which intelliJ 10.5 cant handle, but 12.1 seems to understand well. Unless there is more to it than meets the eye. If so, please do reply to this thread to explain more detail. Thanks.

Flash player installation problem on MAC

I have repeatedly tried to download and install Flash player v14 for my MacBook Pro and it constantly hangs at the "Retrieving Install" screen never moving past 0%. Then it times out and says the install has failed. I have also completely wiped old versions of Flash from my system (now NO Flash-enabled sites will work at all--even more frustrating).
Any clues to remedy? Thanks.

The new Adobe Flash 14 installer does not work when you have an automatic proxy set. I've installed many versions of Flash on Mac without problems, but the new v.14 installer would never even start the download. (Of course the installer dmg would download, but when I ran the installer app, the download of Flash would not start, seemingly hanging at "Retrieving Installation"). I tried the uninstaller, which worked great. Then I tried installing v.13, which also worked fine. But I only got v.14 to install after I ... went to System Preferences > Network > Advanced > Proxies and de-selected Automatic Proxy Configuration. Be sure to make a note of your Automatic Proxy URL, because after installing Flash and going back to the network Preference, I saw that the Automatic Proxy Configuration field was blank. But when I re-entered my APC URL, and clicked to select APC, all was well and I had flash installed while still able to browse external web sites when behind my companies firewall.

Windows XP Installation problem on Mac Pro (Early 2009)

I am wanting to install Windows XP on 400GB of my hard drive in Bay 2
I have 2 hard drives in my Mac Pro. The 1st one came pre-installed and I got a 1TB Western Digital SATA and formatted it as Mac OS Journaled. I used The Bootcamp Utility to make a Windows partition on my 2nd hard drive.
Once I do that I insert the Windows XP SP3 install disc to install it and it says it cannot install it because some random file is missing that is a random bunch of letter and numbers and it says I should erase the partition and try formatting it again. While I'm still using the Windows XP install disc I try doing this it does not work and then when I boot back into Snow Leopard the Bootcamp partition is still there.
Is this not possible? Or is the only way to install Windows XP on the hard drive in bay 2 by formatting the entire drive for Windows?

Since the Vista recovery works fine there must be a problem with the XP installation CD created by nLite. And yes this installation CD was not good. I created it with all current Security Patches and with all available Toshiba Satellite A200 Windows XP drivers. Obvisiously i picked up a wrong driver. May a 64-bit one.
I tried this:
First I created a new Windows XP disc only with the Toshiba Storage Manager driver. This XP Installation works.
Then I created again a Windows XP disc will all Security Patches and all Toshiba Drivers. I doubble checked that I did NOT picked up a 64-bit driver. And this disc works. Thanks all.

Adobe Air Installation problem in Mac OS 10.6.3

I am using a Mac OS 10.6.3, having this error message when installing Adobe Air,
"an error occurred while installing adobe air. installation may not be allowed by your administrator. please contact your administrator"
I downloaded the latest version of Adobe Air from Adobe's website.
Try uninstalling and still having the same problem. Done this troubleshoot method:
1. In Language and Text, only enable English - Then Log out and Log in
2. Make sure in Library - Framework, there's no Adobe Air installation.
Please Help

Finally, you have to do the following ( under Mac OS Snow Leopard ):
-Uninstall ALL air applications.
-Uninstall AIR, using the Uninstaller App ( located in /Applications/Utilities )
AND
-Delete the following directory:
sudo rm -rf /Users/YOUR_USERNAME/Library/Application\ Support/Adobe/AIR/
And BINGO! after doing that, reinstall adobe air, and tweetdeck!!!
There you go, at least that worked for me, hopefully it works for you!

Installation Problem on Mac

When i downloaded the ColdFusion Trial and set it for the
developers version it installs fine until the end. When its
supposed to automatically launch the configuration wizard it says
You have successfully completed the first step in installing
Macromedia ColdFusion MX 7.
However, the ColdFusion service did not install successfully,
and the web server and/or website could not be reached on port 80.
Possible reasons include the ColdFusion service failing to start,
blocked 2920 or 51011 ports, or the web server and/or website is
not running or is not configured to listen on port 80 (in which
case this is not an error).
Please complete the following steps to complete the
installation...
Now i know i probably should understand the steps but i
couldn't find half the things it asked for me to do and i am just
plain tired of spending time trying to figure out what it means and
how to fix it. Any help would be greeeaaaaatttly appreciated.
Thanks in advance and hope to hear from you soon.

Intel Mac, or other?
If intel - go here:
http://webmages.com/geek/cfmx-on-intel-macs
"oipurplepenguin" <[email protected]> wrote
in message
news:ema1bk$695$[email protected]..
> When i downloaded the ColdFusion Trial and set it for
the developers
> version it
> installs fine until the end. When its supposed to
automatically launch the
> configuration wizard it says
>
>
You have successfully completed the first step in installing
Macromedia
> ColdFusion MX 7.
>
>
However, the ColdFusion service did not install successfully,
and the
> web
> server and/or website could not be reached on port 80.
Possible reasons
> include
> the ColdFusion service failing to start, blocked 2920 or
51011 ports, or
> the
> web server and/or website is not running or is not
configured to listen on
> port
> 80 (in which case this is not an error).
>
>
Please complete the following steps to complete the
installation...
>
> Now i know i probably should understand the steps but i
couldn't find half
> the
> things it asked for me to do and i am just plain tired
of spending time
> trying
> to figure out what it means and how to fix it. Any help
would be
> greeeaaaaatttly appreciated.
>
> Thanks in advance and hope to hear from you soon.
>
>
>

Snow Leopard installation problem on Mac Pro

Hello Partners!
I have the following mashine:
(sorry for Russian, but i see - it is the clear information)
Название модели:          Mac Pro
Идентификатор модели:          MacPro3,1
Имя процессора:          Quad-Core Intel Xeon
Скорость процессора:          2.8 ГГц
Количество процессоров:          2
Общее количество ядер:          8
Кэш 2-го уровня (в каждом процессоре):          12 МБ
Память:          10 ГБ
Частота шины:          1.6 ГГц
Версия Boot ROM:          MP31.006C.B05
Версия SMC (система):          1.25f4
Серийный номер (система):          CK******1Z9
UUID аппаратного обеспечения:         ****
When begin the installation on Snow Leopard 10.6.4 -
i have the message - that Can not install to this computer -
and the installation has been interrupted...
Could you tell - Why?
Thanks in advance,
Alecey Batin, Ekaterinburg, Russia.
<Edited By Host>

Ralph,
glad to hear that guys near you - nice people and you have the kind-neighbors relations,
i think it is more then usual for "russians" (not important - Ukrain etc..) ...
I am sure that "System-s" - are one way, people - parallel way evertimes -
and they do not across ...
Was nice to speak here with you and other guys. Really!
O, do not know how it will be seen from US (what about Rusiian-English interface) -
but if you wish - you can see many good picturse (albums from foot-trips in Nature, Russia and other place)
an my page mentioned in Profile here.
Thanks for messages, may be not the last - life not so short ...

PSE9 installation problem on Mac pro---xmas gift

Help!!! I am new to PS and received PSE9 as a gift from my sis and b-i-l for Xmas. Just getting around to install it and have received the following, upon 2 times I tried to install it...
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 12 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: 236 Unable to copy file from "/private/tmp/.tempdiraURngvGu/Assets1/application/Adobe Elements 9 Organizer.app/Contents/ElementsAutoAnalyzer.app/CAFilters/ShakeCAFilter.framework/Version s/A/Resources/Info.plist" to "/Applications/Adobe Elements 9 Organizer.app/Contents/ElementsAutoAnalyzer.app/CAFilters/ShakeCAFilter.framework/Version s/A/Resources/Info.plist" Error 0
ERROR: 236 Command ARKCopyFileCommand failed.
ERROR: 236 Unable to delete file copy at "/Applications/Adobe Elements 9 Organizer.app/Contents/ElementsAutoAnalyzer.app/CAFilters/ShakeCAFilter.framework/Version s/A/Resources/Info.plist" Error 0
ERROR: 236 Error rolling back command ARKCopyFileCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: - Elements Camera Raw: Install failed
ERROR: - Elements 9 Organizer: Failed due to Language Pack installation failure
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: - Adobe XMP Panels CS5: Install failed
ERROR: - AdobeTypeSupport CS5: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Elements 9 Organizer_AdobeElements9Organizer_en_US: Install failed
ERROR: - Adobe Linguistics CS5: Install failed
ERROR: - Elements Inspiration Browser: Install failed
ERROR: - AdobeCMaps CS5: Install failed
ERROR: - Adobe Photoshop Elements 9_LangPacken_US: Install failed
ERROR: - Adobe Photoshop Elements 9: Failed due to Language Pack installation failure
What am I doing wrong or is it the program. I want a quick solution please if you can help me out.
Thanks for reading.
Angela

Please check the solutions mentioned in the below link and let us know if that works for you??
http://kb2.adobe.com/cps/403/kb403912.html
Also, try copying the PSE installer folder on the disk from inside DVD and then double click on Setup.app from the copied installer files and try to install from there...
Regards,
Ankush

EOS Solution Disk v28.1 installation problem on Mac.

Yesterday I got the EOS 700D DSLR and when I wanted to install the EOS Solution Disk nothing happened. Nothing seems to happen when I click the setup icon. Has this happened to anyone?

I recently bought a Canon 70D and I am having the same issues installing. I am running Mavericks and tried to install the EOS Digital Solution Disk Ver.28.2. I double click the setup icon in the cd folder and nothing happens. Does anyone have a solution or work around for this.

I can't get any contact info for installation problem- I just bought a Mac Air and my CS5 is asking for a reinstall. Mac Air has no DVD slots. HELP I al VERY FRUSTRATED THAT ADOBE HAS NO WAY TO GET HELP

I can't get any contact info for installation problem- I just bought a Mac Air and my CS5 is asking for a reinstall. Mac Air has no DVD slots. HELP I al VERY FRUSTRATED THAT ADOBE HAS NO WAY TO GET HELP

You are right, Adobe does not support CS5 because it is no longer sold.
Simply download the trial version of CS5 from this Adobe web site and input your serial number.
Adobe - Photoshop : For Macintosh

I have tried to install office for mac and an iWork trial and each time I go to install my "terminal" opens with the heading bash-80X24 and in the box reads Joel$-office installer.mpkg joel$ . nothing further happens

I have tried to install office for mac and an iWork trial and each time I go to install after downloading my "terminal" opens with the
heading
bash-80X24 and
in the box reads Joel$-office installer.mpkg joel$ .
nothing further happens

This is thread from Apple discussions.
Look for the suggestion from Shootist007 towards the end of the 2nd page.
It is just may be useful.
https://discussions.apple.com/thread/3709115?start=15&tstart=0

Problem with Mac Office Password Protection

I'm running Mac OS X 10.7.5 with MS Word for Mac 12.3.5 and MS Excel for Mac 12.3.5.
I created a Word (.docx) and an Excel (.xlsx) document on my Mac at home, both with password protection. I uploaded the documents onto Google Drive. I was able to open the documents a few times with the password on my Mac at home, and on my PC at work. However, now upon opening the docs, Word and Excel say the password is incorrect (both home MAC and work PC).
I know I'm entering the correct password. I'm 100% positive. I was able to open the docs a few times previously just a day before. Now they're completely inaccessible. My questions are:
(1) Is this a common problem with Mac for Word/Excel docs?
(2) Are there ways to recover the password (a dictionary based brute force solution is unlikely to work, as I use non-word passwords with numbers)?
(3) If this is a common problem, are there other alternatives to password protecting or encrypting Mac for Word and Excel docs that don't cause problems?
Any feedback is greatly appreciated. Thanks.

Could just be thats the way it runs on Rosetta. I called in apple to ask if I could return office '04 because I didn't want to take the chance, they were more than eager to return it for me because of the fact it would be slow/maybe have problems running in Rosetta.
I just got iWorks instead till the universal version of office comes out (which if you buy office '04 you'll have to buy the new universal version as well, or so the rep told me).

Wierd Mac Installer problems

Im not sure why but i cant get any .pkg files to install properly. At some point in the installation the UI becomes totally un responsive and i get the spinning beachball of death. This happens for me with various pkg files, namely the iPhone SDK installer and the Onyx installer package?
Does anyone have any ideas?

See my post with this same post date in the topic iLife '09 installation problems; run preflight script error for one possible cause of this behavior.
It also could be that you need to run the "Permissions Repair" option in Disk Utility's First Aid tab to correct some permission on a system file used during the installation procedure; that your drive's file system needs to be repaired with the "Repair Disk" option; or that the drive does not have adequate free space to complete the installation. (As a rule of thumb, try to leave 10 to 15% of the startup volume's capacity free, or at lease 5 GB over & above whatever the installer tells you is needed for the install itself.)
As a general rule, it is a good idea to quit all other applications before doing an installation that uses Apple's Installer.app, & it may be necessary to disconnect non-essential peripherals (everything except the keyboard, mouse, & monitor) & restart before doing so. You should also consider removing any hacks or uninstalling any third party "enhancers" that modify basic system behavior before doing installs, or at least making sure that the latest versions of such things are installed. (Some "enhancers," especially "Application Enhancer" -- a.k.a "APE"-- are installed by other third party products & their developers do not always make that clear, so do not assume one of these things is not on your Mac just because you have not installed it directly.)

How do I shut down Microsoft Database Daemon SyncServicesAgent - Installer wants it shut down in order to proceed with the installation of Microsoft MAC Office 2011. I cannot find the offending application anywhere. Why this stupid obstacle?

How do I shut down Microsoft Database Daemon SyncServicesAgent - Installer wants it shut down in order to proceed with the installation of Microsoft MAC Office 2011.

open activity monitor (applications>utilities) and quit all the ms office files running in there

HT1461 office installation problem on mac

Similar Messages

Maybe you are looking for