HT1473 i've been trying to import a cd into itunes that has different artists on the cd. (queen of the damned soundtrack) after its done, all the tracks aren't together. its all sepreated. how can i keep all the tracks together?i've been trying to import
i've been trying to import a cd into itunes that has different artists on the cd. (queen of the damned soundtrack) after its done, all the tracks aren't together. its all sepreated. how can i keep all the tracks together?
Happens all the time and you are probably correct about cause.
Some CD manufacturers use various forms of copy protection on discs designed to interfere with computers reading the discs. I have found iTunes to be very picky about this too. I have had several discs iTunes would not acknowledge but could rip with another program. Other times the fix is as simple as cleaning the disc ro turning on error correction for the ripping process.
Message was edited by: camoracer
Similar Messages
-
My computer has died and will not be working ever again. Problem is, i have all of my songs on that computer in my itunes library as well as on my phone. Now i want to add some songs to my phone from some new cds and it tells me i will loose all my songs on my phone right now when i perform the sync. How can i keep all of the songs on my iphone because now i do not have copies of these songs anymore except on my iphone?????? From what i have read, itunes is a joke because it only goes one way apparently. Not happy with itunes right now, more then a bit of a joke
It has always been very basic to always maintain a backup copy of your computer for this very occasion. Use your backup copy of your computer to put everything on the new one.
If for some reason you have failed to backup, big mistake, then you can transfer itunes purchases from the iphone to the computer: File>Transfer Purchases
You may be able to buy a 3rd party program to get any other music off of the iphone ( not supported by Apple).
When you sync the iphone, it will erase the current content and replace with content form the new computer.
"Not happy with itunes right now, more then a bit of a joke"
Not itunes fault that you did not do the very basics and maintain a backup copy. -
I had to get my hard drive replaced from Apple, I lost all of my music obviously. My question is, how can I get all my music off of my iPhone onto iTunes? Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.
You will need to use third-party software to transfer music from your phone to the iTunes Library. I recommend Phone to Mac - Pod to Mac | Macroplant.com.
-
How can I keep only the emails I want. Once I delete them I don't want them popping up. How can I loer the "50 recent" minimum? Thanks
For IMAP mail only
Delete message permanently
Settings>Mail......>tap the little arrow on right of mail account>Archive Messages>OFF
You can't set it to less than 50 Recent Messages. -
How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?
If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex. -
When I load one of my own cd's onto itunes, it creates separate albums for each unique pairing (ie: singer/composer or singer/orchestra). I end up with
the cuts scattered over several albums. How do I keep all the cuts on an album together rather than divided between several albums? I'm brand new with this technology, so I need your information in simple terms. Thank-you.Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
The site could do with updating as some options have changed with iTunes 11, but the principles are the same.
tt2 -
I don't know if someone stole it or not and my ipod isn't set up with the cloud. How can i delete all my information from it?
Unless you have already set up the FIndMyiPod feature (could have been done via MobileMe before iCloud) and wifi is on ans some other conditions are met you can't wipe/erase your iPod.
-
I have V6 of Firefox and never had to worry about the "Reload Page" icon before so when I upgraded to V6 I was sorry to see that it was gone. Also the "Page Back" arrow isn't lit up and won't work. I have to go to the history and go back using that.. what happened to the back arrow? Now there are 2 clicks instead of one?
I went to the "customize Toolbar" and moved the "reload Page" icon back to the top and it disappeared when I was done. How can I keep the "Reload Page" visible and useful?You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden (View > Toolbars > Customize or right-click a toolbar).<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
You only see the Bookmarks menu button if the Menu bar is hidden. -
my friend has found he has, since 2006, accumulated multiple apple ids. he's very concerned about icloud security – and security in general, having had his pc hacked repeatedly. how can he permanently delete the extra, apple ids, please? Thanks.
Hello, windypinesands.
Thank you for visiting Apple Support Communities.
If your friend is concerned with the security of his Apple ID or iCloud account, I would recommend reaching out to our Apple ID Account Security team to assist him with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
How can I keep all of my students on the same page in an iBook?
My school is in the process of giving each student an iPad Mini, one grade at a time. As a ninth grade teacher, all of my students have one, but we are having some trouble staying on the same page when we are reading a novel ( no pun intended ). What I mean is that what appears on page fifty for me will appear on page forty for one student and on page sixty for another. I tried to fix this by having all of my students keeping their iPads in landscape orientation, but that did not solve the issue. I then tried to have students adjust the size the font on their books so we would have a uniform text, but the tool for adjusting the size images this tricky as well.
I am considering having all of my students make their font size as small as possible and then giving them a specific number of times to tap on the font increase, but I am hoping to find a simpler method. Am I overlooking something?
I would appreciate any tips that you might have.You can render the ebook on an instructional application called Zankura. Not only can you control the screen scrolling, but all the students can freely annotate with their stylus. www.zankura.com.
-
How can I keep all the previous datas in the same array?
I have a problem with keeping the previous datas in my array. The problem is when the iteration loop is executed, I have one or two value(s) stored in the array. The second iteration I have either one or two values (depending on the condition) coming out, but it overwrites my previous value. I want to keep all my data in the same array as the loop is executed.PS. I have attached a simple vi along this message. If anyone can help me out with this, I really appreciate for the help.
Regards,
SonnyIf you iterate several times (N > 100) then I would suggest using the Initialize Array outside of the For Loop and then use the Replace Array Subset inside the Loop to populate the array. The reason for this is because the Build Array utility has to locate a new space in memory for the newly concatenated array -- the Replace Array Element utility uses the same memory space.
If you iterate just a few times with a small array then using the Build Array should be okay.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect -
When i open up the Add-ons tool, under themes it only shows the last 10 or so themes i used. Is there any way that you can let us download as many themes as we want so we don't have to search for them again in the personas gallery? Meaning that when we install a theme, it saves that theme for later use and if we don't want that theme we can just uninstall it. Because i have over 20 favorites that i like to switch around every few days.
Thanks, Rick PerezThe only thing you need to move is your music folder. Once that is done, you need to tell iTunes where it is located.
Actually, this is NOT the way to do it. It usually works only because Mac OS is pretty good about keeping track of files. It's not how iTunes is designed to work. Many, many Windows users (and a few Mac users too) have problems when they do it this way.
-> iTunes for Mac: Moving your iTunes Music folder (5, 11 & 13 are the main steps, paraphrased below)
The correct way to do it is to point iTunes prefs -> Advanced - iTunes music folder to a new location then go to iTunes menu -> File -> Library -> Consolidate library.
iTunes will copy everything in iTunes to the new location. Then you can delete the old iTunes music folder n(and any other music you had in iTunes but not in the music folder). -
HT1495 HOW CAN I KEEP ALL OF MY INFORMATION SEPERATE FROM THE OTHER USERS ON MY ACCOUNT?
We have two iphones and a ipad therefore I need to know how to make each item on a seperate account. Everyone's information goes on everyones electronic device. How can I fix this?
Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
Also... See this Discussion...
https://discussions.apple.com/message/17613637#17613637 -
I've inherited a previously used early 2011 13-inch MacBook Pro at work.
I now have my own account on the computer, however the account does not show up on the list of users to log in as in the start up log in screen. It will only appear if I first log in as one of the users who do appear, then logout. The background also changes between these two log in screens - the start up one is white whereas after logging out of one user it's the brushed steel background. My account has admin powers.
Anyone have any ideas how I can make this account also show up on the start up screen?
Thanks in advance for any help.I do think it has something to do with FileVault.
Under System Preferences -> Security & Privacy -> FileVault I try and click "Enable users" near the bottom (after unlocking with an admin password). If I do this from my own account a green check mark appears next to my name, but upon clicking "done" I received this message after a brief loading period:
The following users weren’t allowed to unlock this disk because an unknown error occurred: (myusername).
I tried going into the root account and performing this same process, the first time System Prefences unexpectedly quit, and the second I received the same error as above after clicking the "Enable User..." button next to my account and trying to hit "Done". -
How can I keep only the photos i like in my hard drive ?
lets say i download 10 pictures from my camera to my library.
i dont like five and send them to my trash bin.
then i modify them all five and everything looks allright in my iphoto library.
And then i go to my hard drive and i have 20 photos!
but i only want in my hard drive the five i previously chose and modified and are in my library.Hello, giru san,
Welcome to the discussions.
First, I think you need to understand a bit of how iPhoto is designed to work. When you import your photos into iPhoto, iPhoto stores your original photo in its iPhotoLibrary file called Originals. That way you always have the original photo. If you make any edits, then iPhoto puts your edited photos into its Modified file. In addition, iPhoto creates thumbnail versions of your photos. So, after importing and editing you will have three sets of photos. That is just how iPhoto works.
Have a look at the posts of smtr, Terence and Old Toad for more explanation here
You may also find it useful to look at the Apple tutorial for iPhoto
When you have iPhoto open, be sure to look at the Help files for a lot of information and explanation of how iPhoto works.
Also, don't ever change, rename or move anything from the iPhotoLibrary files on your hard drive. Do all your iPhoto changes from within iPhoto. If you change or rearrange those files you can seriously damage iPhoto and may lose your photos. See this Don't tamper with iphoto files
Maybe you are looking for
-
Can I have two active versions of JRE on the same PC?
Some one please advice me if I can keep two different versions of JRE on the same PC running under Win NT. I have to use one version(1.2.2) of JRE for running an application and a later version(1.3) for running some other applications. I tried to ins
-
I am currently responsible for an existing CMS, built a few years ago with C# .Net and a few clients are requesting to have their website in Spanish. The websites are pre-populated with pages from a library and currently the application has no suppor
-
Sounds like she'll be getting a new phone again but wondering if anyone totally reset the phone for a fix. Thanks.
-
Usb port not recognizing external drive
When I plug my external backup drive, Lacie, into either USB ports on my MacBook Pro, it is not recognizing the drive. Not sure if I powered down incorrectly. It use to recognize it. Help.
-
How to find the views created on a table..?
Hi all, I am having one table name, EMP. I want to know what are the views created on this table. Is there any SQL query is there for this or any another way to find it. Thanks in advance. Pal