HT1473 Latest version of iTunes does not support transfer of Shared libraries under home sharing. Why is that?
Why is it that two of my computers are able to home share and move files to and from the two separate libraries and my third computer cannot. It has the latest version of iTunes and it does not allow transfer of songs from the library. Anyone know why this has changed?
Hi,
Home sharing is turned on within ITunes yet apple TV says on the computer icon that: To access your ITunes library on Apple TV turn on home sharing in ITunes on your computer using (my email address)
It is turned on?
I have so far restored Apple TV to its factory settings
Uninstalled ITunes and reinstalled it
Tried to install an earlier version of ITunes however even that says cannot use library due to being created by a later version of ITunes.
Really not sure what to do next?
Thanks
Similar Messages
-
While looking to upgrade to a newer MBP, found out latest version of iTunes does not support wired syncing of iCal and contacts. Syncing of these must be done through iCloud. This is a deal breaker for me for several reasons. Are there any workarounds or do I have to go back to a PC with my tail tucked between my legs?
When you say wired syncing, are you meaning between an iphone and your mac?
-
Latest version on itunes does not support Quicktime......can't play TV show my wife bought last night on iTunes. Help
"This movie requires QuickTime, which is not supported by this version of iTunes." http://support.apple.com/kb/TS3771
-
Latest version of itunes does not support Quicktime can not play movie from library
Latest version of Itunes does not support Quicktime. I can not play movies out of my itunes. Please fix
I don't usually download video from the iTunes store. I had a couple of long plane rides coming up and thought I might have time to watch the Stanford IOS7 programming class. On the plane I discovered this issue which has gone unaddressed since 2011 and has been worsened in Mavericks. in 2011 the advice was to open iTunes' get info pane and click run in 32 bit. That worked at least for some people. In Mavericks, iTunes will not launch in 32 bit.
For the files you can locate in the finder ( mine are at
/Users/raine001/Music/iTunes/iTunes\ Media/iTunes\ U/Developing\ iOS\ 7\ Apps\ for\ iPhone\ and\ iPad/1.\ Class\ Logistics\,\ Overview\ of\ iOS\,\ MVC\,\ Objective-C.mp4
) you can click on the file in the finder and it will launch in QuickTime. For some reason on the plane I could see the first lecture in the iTunes view but, although I could see all the other lectures in the finder, I could not see the first one.
Ah well, maybe some other year I'll think about getting up to speed on ios7. Heck, maybe by then they will design a decent user experience. -
The latest version of iTunes does not allow me to open a playlist in a separate window. I need this feature. Is there another way? You used to be able to double click a playlist and have it appear in a new window.
Others have commented on this too. It seems to be one of the 'improvements' of the newer version you are supposed to embrace with joy as an exciting new development. You can send feedback to Apple but realize you may be perceived as standing in the path of progress.
http://www.apple.com/feedback/itunesapp.html -
Latest version of iTunes does not work on Windows Vista
after downloading the latest version of iTunes, it would not load up & could not be run. I started getting an error message when the computer was started - so the problem is affecting the startup menu i guess. Anyway - no iTunes at all.
I cannt remember the error message i received on startup - but it was looking for a program & was telling me to re-install it. I did not realize it had anything to do with iTunes until i actually tried to start iTunes from my desktop & got the same error message.
i tried:
1) restarting my computer
2) uninstalling different unnecessary Apple software packages (iCloud, all of the remote maintenance crap)
3) restarting again
4) uninstalling & reinstalling iTunes & restarting
...none of this worked. In fact, i cannot even re-install iTunes w/out getting an error message.
The error message i got when re-installing iTues was identical to the one I got when I installed the latest updates when prompted by the update server.
very frustrating! did Apple hire IT people from my day job? Because they tend to botch stuff in the same manner.
dwi forgot the exact text of the original error message, but it was looking for a *.dll that was not there - as if the install had not completed.
tried re-installing & it would stop in the middle of the download with a completely different error message - i was going to screen grab it, but then i got it to work!
Anyway, after uninstalling everything related to iTunes, emptying my recycle bin, cleaning up a bunch of unnecessary files, and stopping some programs that were running in the background (using task manager) - i did a complete re-install from the Apple iTunes website & it worked fine.
thanks!
dw -
Latest version of itunes does not work.How do I open itunes?
Downloaded latest version of itunes. Now itunes will not open. Any suggestions?
What error message do you get when you try to open iTunes? (Precise text, please.)
-
Most recent version of iTunes does not recognize my video iPod, what to do?
I have a video iPod that I got last year and had it synced to my Windows XP on my desktop and I had recently synced it with my Macbook and had no problems with videos, pictures, movies, etc. I got a new iPod nano red and went to put music in it, but I had to download the latest version of iTunes. Just a few days ago I was able to still use both iPods on my MacBook. I just tried to put new videos on my video iPod and I get an error message saying: "the video was not copied, because this device does not support this file." I tried to authorize this computer, that didn't work. I tried converting the selected video, but I get an error(-50). I don't know what to do, any ideas? I appreciate anyone's help. THANKS!
Kevin .... I'm with you. I have the same problem. iTunes 9.0 / Windows 7 ... how we actually talk to someone at Apple to get a fix? I got a brand new $800 windows cpu ... that is a brick when it comes to iTunes. If anybody can help us, please let us know.
Baskin-Robbins -
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
New version of itunes does not install
The new version of Itunes does not install on my computer. I have run all of the service steps from the knowledge base and there has been no change. I am running win 7 64 bit on an alienware m17x. can I get some help? I have my dxdiag if it will help.
The last version of itunes (what I believe to be the first 64 bit one) , the textures were not always correct but it still functioned. This new one doesn't even install and as a troubleshooting thing I unistalled itunes and quickime as well as clearing the temp files and running the instaler with no 3rd party programs on startup, so now I have no itunes. Any help you could give would be greatly appreciated.Hmm, no response, I guess this must be too hard a problem to solve
Is this because XP is not officially supported any more??
People who have problems installing on Vista seem to get a response!!
I think that I will just keep the version of itunes that I currently have installed as, judging by the people on this forum who have problems with the new version, I am probably better off not upgrading anyway. -
Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?
The GH4 must be very new as it’s not listed in Adobe’s supported cameras, so wait until the next version of LR. Usually there is one every 3-4 months with a release-candidate available at Adobe Labs before that: http://labs.adobe.com/
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html -
The latest version of Mavericks does not allow a Pages document to become a 'stationery pad'! Is there a way to do this this other than through the 'Get Info' window? As Pages templates cannot be ordered in folders, my many templates are effectively unusable now and I need to find another way to order and access them.
Are you aware of that you can still use Pages 09 on Mavericks? You don't have to go thru the grieves of using the crippled Pages 5. Pages 09 should bi in Applications/iWork 09 folder.
-
When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?
after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok. -
i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?
You need to uninstall the Community / Conduit toolbar add-on.
Locate the files in bold print and move them to the Trash. The first five are in your root /Library
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/ScriptingAddtions (anything CTLoader realted)
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
The next one is in your Home folder.
~/Library/Application Support/Conduit
When you're done, try Safari. -
i just bought a movie on itunes. everytime the movie starts to download it stops and when i click on it it says that it needs quictime and my itunes does not support it. what do i do?
How to report an issue with Your iTunes Store purchase
Maybe you are looking for
-
Getting ConverterELTag error while deploying the application though jsf1.2 library is added
Hi ADF Experts, I am using JDeveloper 11.1.1.7.0 and while deploying my application to weblogic server I am getting the below error. [Deployer:149193]Operation 'deploy' on application 'AppsSUI' [Version=0.5-SNAPSHOT]' has failed on 'DefaultServer' [0
-
how do i reload OS X Server on Mac Mini, App store says installed but no reset or reload, system tells me to reinstall?
-
How do I insert a 'date created' field into a template?
I know that you can insert date & time fields into templates and make them auto-update whenever I open the document, but I am wondering if I can make the date field be set to the date when I created the document and then stay that date even if I reop
-
Transfer stock from Storage Location to Bin
Dear All, what is the procedure to transfer stock from Storage Location to Bin ( T.Code and Mov.Type) waiting for your Reply with best regards Suman
-
Can someone tell me what variable type 16396 is? I am receiving this error after the script has been called and ran, no probelms while the script is executing. After the script has finished is when this error presents itself. Thanks for any help. Pau