HT1476 Device Not Supported when car charging my iPhone 5

So has anyone found an Apple car charger that works with iPhone 5s? Best advice I've received is to buy a separate inverter with AC and USB connctions on the front...

iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer.
It couldn't be much easier than that as you don't actually have to do anything more than normal.
This lets you listen to voice memos on your computer and provides a backup if you delete them from iPhone.
Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
USB syncing is far faster than Bluetooth.

Similar Messages

  • Why does phone say "this device not supported" when charging

    why does phone say "this device not supported" when charging?

    If it is clean connect a 2nd accessory of the same kind to see if you need to replace the accessory or continue troubleshooting the phone.

  • HT3887 why does my iPhone say device not supported when connecting to my make even after it has successfully paired?

    why does my iphone say device not supported when connecting to my mac pro, even though it has already succesfuly paired? I also use a wirless bluetooth keyboard and mouse on the computer successfully.
    Also when I turn Bluetooth on on the phone the devices cog never stops turning (forever serching for a device)

    iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer.
    It couldn't be much easier than that as you don't actually have to do anything more than normal.
    This lets you listen to voice memos on your computer and provides a backup if you delete them from iPhone.
    Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
    USB syncing is far faster than Bluetooth.

  • HT1476 when i charged my iphone on y pc after some time showing charger not supported with this accessory what have to do to solve it

    when i charged my iphone on y pc after some time showing charger not supported with this accessory what have to do to solve it

    If you did not do a reset of your iPod please try that (you will not lose any data)
    Reset iPod touch:  Press and hold the On/Off button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    If this does not work inspect the opening in your iPod where the cable connects. Look for any debris and clean it (a magnifying glass may be required).

  • Keep getting accessory not supported when charging in romania.  I have a converter for wall and a att USB cord

    Keepgettimg accessory not supported when charging in romania. I have all the correct connections. ie wall converter, USB cord etc.

    If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
    If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
    With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
    So, are you able to confirm you have a working connection between the Mac and printer?

  • "charging is not supported" when using the cable that came with ipod

    I get an error message that "charging is not supported" when plugged in using the only cable that came with my ipod touch. My ipod will charge for 5 minutes then when I check on it, I notice this error on screen and the ipod has stopped charging.  I'm using the same charging method I have always used since I owned this ipod which has been over 2 years now and this only started happening recently. I believe this started when I upgraded to 5.0.1.

    - Look at both partsof the 30 pin dock connector.  Log for bent. mising or corroded contacts of orther abnormalities. The cable could be bad.  Try a new one.
    - Try a reset. Nothings is lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • IPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync

    iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
    It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
    I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
    Does anyone have any ideas on how to fix it?
    Thanks.

    Your iPod Nano firmware and iTunes updated to the current versions? 
    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 

  • Why charger saying not supported when it is a genuine apple charger

    Why charger saying not supported when it is a genuine apple charger

    Do you mean the AC wall adapter or the cable when you say "charger"? Neither is a charger; the charger is built into the phone. You need to do some basic troubleshooting. First, try a different cable with the same AC adapter. Then try a different USB source such as the USB port on your computer. If you get the same message after both tests the problem lies in the phone. The most common cause of this message is dirt, moisture or pocket lint in the lightning connector on the bottom of the phone. Inspect it with a bright light and clean it with a plastic or wood toothpick. If none of these steps resolve the problem take the phone, cable and adapter to an Apple store for diagnosis. Make an appointment first: http://concierge.apple.com/reservation/us/en/techsupport/
    Note: You should register the iPhone on Apple's website first, if it isn't already registered: https://supportprofile.apple.com/. This will speed up the appointment process.

  • "charging device not supported"

    My ipod touch send me a message saying "charging device not supported" and i could not charge it. Now my ipod is out of battery and i can not charge it. what can I do? i know is not the SUB cable because is the one it came with. i also used 2 other to try to charge it but nothing.

    what are you charging it from?

  • I pair with other peoples phones but when i go to connect with them it says device not supported why is this?? this is the iphone 4 i am using

    i want to know how to get my bluetooth working with other phones please help as when i go to connect it says device not supported!!

    The iPhone cannot connect to any other phone over Bluetooth.
    The exception is other iOS devices in games and apps that have 'peer-to-peer' Bluetooth connectivity.

  • Why does my macbook pro keeping saying it is not supported when I try to connect it to other devices?

    My macbook pro keeps saying its not supported when i try to transfer images and stuff from my macbook pro to my iphone 4. What do I do?

    First, put your images into iPhoto or into a separate folder. Open iTunes and connect your phone. Select the iPhone under the Devices section of iTunes' sidebar. Click on the Photos tab in iTunes' main window. From the dropdown menu you can select iPhoto or some other folder from which to sync the photos to your phone.

  • "This device not supported" msg when connecting camera

    I just tried plugging in my (four year old) Canon Digital Elph via the USB connector (30 pin male to USB female) and got the "device not supported" msg on my iPad2
    Are only recent cameras supported?

    keyboardoperator wrote:
    The camera connector I'm using is one I bought some years back to connect a camera to an iPod Photo. It looks to be the same as the current one, however.
    Could this be a connector issue rather than a camera issue?
    Yes, it's a connector issue. The connector you have doesn't work with the iPad, as you've discovered. It doesn't work with any iOS device. You need the iPad Camera Connector Kit. It has two different dongles, one to connect a USB cable, the other, an SD card.

  • "Charging with this accessory is not supported" But it's my iPhone charger?

    When I try to connect my phone to the iPhone charger in the wall socket, and also the USB cable to my iMac it say's "Charging with this accessory is not supported".
    What's the deal?
    Also when I make calls, I get a freaky alien noise nearly everytime. I can hang up and recall the number and it will work fine, but almost every first call is like this, and no doubt I'm getting charged for it too.
    Any help appreciated.

    I had a Belkin charger and cord for the iPod Touch 3G because Apple failed to include a necessary AC adapter to charge one of their products, which I thought was cheap being that it is a 300+ device. Anyways, when I plugged my new iPhone 4 in, I could not turn on the sound and it didn't have any sound. When I used the cable that came with the iPhone, I was able to get my sound back. The problem is with the cord. If it is not completely compatible with Apple then you will not be able to charge the iPhone.

  • Tv not supported when connecting HDMI to ipad 30 pin connector running ios 8

    tv not supported when connecting HDMI to ipad-2 30 pin connector running ios 8.  Was working fine with ios 7.

    Hello,
    I need to conect it to either a mouse or an OLED display to transfer the content I was going to use thee standard charging USB to a port splitter and sending it from there but I wanted to check before I did something stupid.
    Thanks.
    James

  • Updated iphone4 to ios5 - get Device not supported for icloud - worked fine for other iphone4

    Updated iphone4 to ios5 - get "Device Not Supported" message - worked fine for other iphone4 & ipad.  Why is this iphone "not qualified for icloud"?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

Maybe you are looking for

  • How to print a matrix in this order

    Hai All, I am Having a matrix like this 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 and I need to print like this 1 2 3 4 8 12 17 16 15 14 9 5 6 7 11 10 Please help me ..

  • Purchase not authorized

    Hello, I did not authorize the skype purchase (U$ 4,99) and I would like to cancel this order... Thank you very much

  • Jquery.js and other .js file includes problem

    Hello! I have a problem with external .js files. If I link them in the <head> field at the page properties section, nothing happens. I saw that Muse put it's .js files at the end of the <body> tag. If I open the html file, with notepad, and put my in

  • Virtualbox no longer detects system theme

    Hi.  I just upgraded all the virtualbox packages.  I replaced virtualbox-additions with virtualbox-iso-additions, and virtualbox-modules with virtualbox-host-modules <-- I think those were the replacements.  There were two that pacman asked me about

  • Create target group for contacts does not work

    Hi Experts, I am working on a Markting solution for a University with CRM 5.0. We need to contact certain Teachers in Schools (they have an orientation function for pupils that might study in the University in the future). I can segment for schools i